Sorption of pure CO2 and CH4 and CO2/CH4 binary gas mixtures in amorphous glassy Poly(2,6-dimethyl-1,4-phenylene) oxide (PPO) at 35 °C up to 1000 Torr was investigated. Sorption experiments were carried out using an approach that combines barometry with FTIR spectroscopy in the transmission mode to quantify the sorption of pure and mixed gases in polymers. The pressure range was chosen to prevent any variation of the glassy polymer density. The solubility within the polymer of the CO2 present in the gaseous binary mixtures was practically coincident with the solubility of pure gaseous CO2, up to a total pressure of the gaseous mixtures equal to 1000 Torr and for CO2 mole fractions of ~0.5 mol mol−1 and ~0.3 mol mol−1. The Non-Equilibrium Thermodynamics for Glassy Polymers (NET-GP) modelling approach has been applied to the Non-Random Hydrogen Bonding (NRHB) lattice fluid model to fit the solubility data of pure gases. We have assumed here that no specific interactions were occurring between the matrix and the absorbed gas. The same thermodynamic approach has been then used to predict the solubility of CO2/CH4 mixed gases in PPO, resulting in a deviation lower than 9.5% from the experimental results for CO2 solubility.
16 March 2022 in Measurement Science and Technology
A dynamic method for the storage of calibration gas mixtures is presented using thermal mass flow controllers (MFCs) connected to a dead end volume. The approach relies on barometry to calibrate the unknown constant volume and two MFCs which regulate the flow rate of carbon dioxide and methane respectively. Binary gas mixtures of these components are prepared and stored within the calibrated volume tank up to 9 bar at ambient temperature. Thermodynamic data of pressure, temperature and density of the gas mixtures are retrieved. The expanded uncertainties at 95% confidence level of the molar fraction and the density of the mixture are evaluated. FTIR Spectroscopy is used in situ to analyse the gas mixtures.
29 February 2024 in Separation and Purification Technology
The diffusion process of water molecules within a polyetherimide (PEI) glassy matrix has been analyzed by combining the experimental analysis of water sorption kinetics performed by FTIR spectroscopy with theoretical information gathered from Molecular Dynamics simulations and with the expression of water chemical potential provided by a non-equilibrium lattice fluid model able to describe the thermodynamics of glassy polymers. This approach allowed us to construct a convincing description of the diffusion mechanism of water in PEI providing molecular details of the process related to the effects of the cross- and self-hydrogen bonding established in the system on the dynamics of water mass transport.