Florian Schmidt

Mr. Florian Schmidt

University Hohenheim
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 August 2022 in Journal of Food Measurement and Characterization
Verified
Journal Article
Open access
PDF file
FSFlorian Schmidt
Florian Schmidt
MBMax Blankart
Max Blankart
JWJanina Wanger
Janina Wanger
MSMarkus Scharfe
Markus Scharfe
TSTheresa Scheuerer
Theresa Scheuerer
JHJörg Hinrichs
Jörg Hinrichs
The upscaling of pea protein extraction from laboratory scale with a centrifuge to pilot scale with a decanter centrifuge was investigated, and the pea protein extraction efficiency from dry milled and pre-treated peas was compared. Upscaling from laboratory to pilot scale is possible since starch was under the limit of detection (< 0.5%). The protein banding pattern of a sodium-dodecyl-sulfate polyacrylamide gel electrophoresis confirmed that albumins and globulins were extracted by alkali extraction. Protein yield increased from 59.5% to 67.1% for dry milled peas due to constant and quick discharge of dry matter in the decanter centrifuge. For pre-treated peas, the protein yield increased from 60.3% to 94.3%, which is explained by an improved cutting and improved separation in pilot scale compared to laboratory scale. The impact of acceleration, mass flow, differential speed and their respective interactions in the decanting process was determined with a design of experiments. For dry milled peas, only the mass flow exceeded the significance level. However, a mass flow of 5 kg h−1, an acceleration of 1000 g $$\times$$ × and a differential speed of 50 min−1 led to the highest protein yield of 75.6%. The obtained protein yields for the pre-treated peas were in the range of 83 to 96% and therefore did not show significant differences in protein yield.

1 December 2021 in Innovative Food Science & Emerging Technologies
Verified
Journal Article
Closed access
CTCaren Tanger
Caren Tanger
FSFlorian Schmidt
Florian Schmidt
FUFlorian Utz
Florian Utz
JKJohanna Kreissl
Johanna Kreissl
CDCorinna Dawid
Corinna Dawid
UKUlrich Kulozik
Ulrich Kulozik

24 March 2021 in Foods
Verified
Journal Article
Open access
PDF file
RSRoland Schopf
Roland Schopf
FSFlorian Schmidt
Florian Schmidt
JLJohanna Linner
Johanna Linner
UKUlrich Kulozik
Ulrich Kulozik
The fractionation efficiency of hollow fiber membranes (HFM) for milk protein fractionation was compared to ceramic tubular membranes (CTM) and spiral wound membranes (SWM). HFM combine the features of high membrane packing density of SWM and the more defined flow conditions and better control of membrane fouling in the open flow channel cross-sections of CTM. The aim was to comparatively analyze the effect of variations in local pressure and flow conditions while using single industrially sized standard modules with similar dimensions and module footprints (module diameter and length). The comparative assessment with varied transmembrane pressure was first applied for a constant feed volume flow rate of 20 m3 h−1 and, secondly, with the same axial pressure drop along the modules of 1.3 bar m−1, similar to commonly applied crossflow velocity and wall shear stress conditions at the industrial level. Flux, transmission factor of proteins (whey proteins and serum caseins), and specific protein mass flow per area membrane and per volume of module installed were determined as the evaluation criteria. The casein-to-whey protein ratios were calculated as a measure for protein fractionation effect. Results obtained show that HFM, which so far are under-represented as standard module types in industrial dairy applications, appear to be a competitive alternative to SWM and CTM for milk protein fractionation.

1 February 2021 in Journal of Membrane Science
Verified
Journal Article
Closed access
RSRoland Schopf
Roland Schopf
FSFlorian Schmidt
Florian Schmidt
UKUlrich Kulozik
Ulrich Kulozik

6 July 2024 in Food Research International
Verified
Journal Article
Open access
DODominic Oppen
Dominic Oppen
FSFlorian Schmidt
Florian Schmidt
SBSarah Helena Braitmaier
Sarah Helena Braitmaier
JHJörg Hinrichs
Jörg Hinrichs
JWJochen Weiss
Jochen Weiss
Pasta filata-style cheese products are among the world's most famous cheese varieties. Thermo-mechanical processing of cheese curd results in stringy, fibrous, and anisotropic structures with pleasing texture attributes. A recent area of research focuses on improving yield during the manufacturing of pasta filata-type cheese products by homogenizing the milk. This process reduces the size of fat droplets, leading to better retention of milk fat during curd plasticization. As this sometimes results in texture deficits, this study aims to investigate the impact of thermo-mechanical processing on curd from homogenized and non-homogenized milk. The hypothesis is that increased thermo-mechanical processing, leading to more anisotropic structural elements, may offset texture deficits caused by homogenization. To assess textural and structural changes due to homogenization and thermo-mechanical processing, mechanical tests including rheology and texture analysis were conducted, along with confocal-laser-scanning microscopy. Additionally, sensory evaluation involving panelists consuming the samples and recording mastication properties such as muscle activity and jaw movement was carried out. Dynamic data modeling was used to derive connections between structure and texture. Results showed that homogenization alone did not yield significant differences between the samples, but plasticization and texturization properties differed significantly. Non-homogenized samples developed a distinct fibrous structure, and muscle activities and jaw movements increased significantly (p < 0.01) with longer thermo-mechanical processing.

25 September 2025 in International Dairy Journal
Verified
Journal Article
Open access
FSFlorian Schmidt
Florian Schmidt
JHJörg Hinrichs
Jörg Hinrichs