This study proposed a new suction bucket (SB) foundation model for offshore wind turbines (OWT) suitable for a shallow muddy seabed, using more than three single buckets through kinetic derivation. The performance of new optimal foundation was evaluated by its horizontal displacement capacity and compared with a conventional SB composed of three buckets. Under external loads such as earthquakes, wind, and the combination of the both, the stability of this novel SB foundation was verified. The seismic fragility curve was also evaluated at some scour depths. These results were compared with the response of a tripod suction bucket (TSB) foundation, which was also designed for a shallow muddy seabed. The results indicated that scour significantly changed the dynamic response of this novel SB foundation but it had a better bearing capacity than the TSB foundation, despite its smaller size and weight. The fragility of TSB is always higher than the developed foundation in the same environmental condition. With reasonable volume and size, this novel SB foundation has great potential for future industrialization and commercialization.

For the offshore wind turbines (OWTs) located in a seismically active region, the occurrence of earthquakes combined with scour is a highly possible multi-hazard event. This study developed an alternative fragility analysis framework to assess the seismic performance of suction bucket-supported OWTs under the action of scour. First, the probabilistic approach was applied to calculate the occurrence probability of scour depth (SD) and earthquake events. Then, the possible combinations of these two events were considered in the analysis model to establish the fragility surface of the suction bucket foundation. Finally, by integrating the product of scour and earthquake hazard, as well as fragility curves, the suction bucket foundation failure probability was obtained. The developed framework provides a reliable approach to risk assessment for OWT-supporting structures in extreme event situations and can be applied to other complex natural hazards.

This study investigates the system stability of breakwater foundations subjected to earthquakes from a probabilistic point of view. A fully probabilistic approach, i.e., a combination of the Monte Carlo simulation and Bishop’s simplified method, has been developed to evaluate the system failure probability of foundation damage, one of the prevailing failures encountered during earthquakes. Twelve sections of perforated caisson breakwaters located around Korea were chosen as case studies. First, the reliability analysis was performed for all the breakwaters at existing conditions; then, the calibration process involving the estimation of load and resistance factors was conducted for 12 breakwaters at three levels of the target reliability index. As the performance function, used in the stability analysis of breakwater foundations, is defined based on an implicit shape with a high-dimensional space of variables, the calibration process of load and resistance factors becomes cumbersome and complicated. Therefore, this study has proposed a sensitivity analysis to be implemented prior to the calibration process to elicit the effects of variables on the stability of each breakwater, which, thereafter, effectively directs the calibration process. The results of this study indicate that the failures in the foundation of breakwaters frequently occur in different modes. Therefore, the failure probability should be estimated considering all possible failure modes of the foundation. The sensitivity results elucidate that the soil strength parameters are the dominant variables, contributing to the stability of foundations, whereas the seismic coefficient presents the negative effect, causing the insecurity of breakwaters. In particular, the deadweights, though directly contributing to the seismic forces, show a small effect on the stability of foundations. The calibration shows that the load factors slightly vary with an increase in the target reliability index and set 1.10 for three safety levels. In contrast, the resistance factor exhibits an inverse relationship with the specified reliability index. Especially when the load factor equals 1.10, the resistance factors are 0.90, 0.85, and 0.80, corresponding to the reliability index of 2.0, 2.5, and 3.0, respectively. Eventually, it is proved that the sensitivity analysis prior to the calibration process makes the procedure more efficient. Accordingly, the iteration of simulation execution is diminished, and the convergence is quickly accomplished.

This study investigated the seismic performance and assessed the seismic fragility of an existing pentapod suction-bucket-supported offshore wind turbine, focusing on the amplification of earthquake ground motions. A simplified suction bucket–soil interaction model with nonlinear spring elements was employed within a finite element framework, linking the suction bucket and soil to hypothetical points on the OWT structures at the mudline. Unlike conventional approaches using bedrock earthquake records, this study utilized free-field surface motions as input, derived from bedrock ground motions through one-dimensional wave theory propagation to estimate soil-layer-induced amplification effects. The validity of the simplified model was confirmed, enabling effective assessment of seismic vulnerability through fragility curves. These curves revealed that the amplification effect increases the vulnerability of the OWT system, raising the probability of exceeding damage limit states such as horizontal displacement of the tower top, tower stress, and horizontal displacement at the mudline during small to moderate earthquakes, while decreasing this likelihood during strong earthquakes. Comparisons between the Full Model and the simplified Spring Model reveal that the simplified model reduces computational time by approximately 75%, with similar seismic response accuracy, making it a valuable tool for rapid seismic assessments. This research contributes to enhancing seismic design practices for suction-bucket-supported offshore wind turbines by employing a minimalist finite element model approach.

This paper investigated the fatigue life of offshore wind turbine (OWT) support structures. For this purpose, a 3 MW-capacity typical wind turbine is investigated using time-domain finite element simulations. In numerical simulations, different stochastic wind models corresponding to different accumulation periods are applied. Then, the stress-based fatigue life is estimated following the rain-flow counting algorithm and Palmgren-Miner linearly cumulative damage rule. The study also addresses the joint distribution of loads at the site of interest. Generally, the study emphasizes the significance of the long-term distribution of the applied environment loads and its influence on the fatigue life of OWT’s substructures. The results imply that the wind measurement period is directly linked to the fatigue life of offshore wind turbine support structures. Accordingly, its fatigue life is significantly reduced at the 25-year accumulative period of wind. Therefore, this study recommends that a sufficient number of accumulative periods of wind and other environmental loads should be considered appropriately.

Scour risk assessment considering reaction force at foundation was proposed and applied to newly developed pentapod suction bucket support structures for a 5.5 MW offshore wind turbine under ultimate limit state environmental load. Scour hazard was obtained according to scour depth by using an empirical formula, which is the function of marine environmental conditions such as significant wave height, significant period, and current velocity. Fragility of the pentapod support structure was evaluated using the bearing capacity limit state criterion under ultimate limit state load case. Scour risk was assessed by combining the scour hazard and the fragility. Finally, scour risk of the developed pentapod suction bucket support structure under ultimate limit state has been assessed.