Purpose: In order to present a significant usage of the computer-aided design (CAD)/computer-aided manufacturing (CAM) systems in the apparel and textile industry, the current literature has been observed. Although the CAD/CAM systems have also been increasingly applied to all fields apparel and textile manufacturing for the last few decades, improving the precision, productivity and the organization of the information flow, they have not been fully utilized in these industrial fields. The paper aims to discuss these issues. Design/methodology/approach: The paper is structured in three main sections showing the vast applicability of the CAD/CAM systems, the benefits provided by them and the future trend in their development. Findings: Although the initial development of the CAD/CAM systems strived to completely eliminate manual and time-consuming operations, they have not been accepted in practice due to their inflexibility at making changes and the time needed for regenerating a complex parametric model. The textile and apparel industries show slow progress in acquiring the CAD/CAM systems. Originality/value: This CAD/CAM technology enabled the customization in the design process according to individual needs and directed the textile and the apparel industry to moving into new directions such as the mass customization to personalization. The paper makes clear that although this technological concept is rather old, the use of the CAD/CAM systems will inevitably broaden in terms of applicability to new production stages.
Former studies done by other authors investigated the first- and second-layered air gaps beneath the clothing garments. None of the previous studies reported multidisciplinary clothing design testing approach linking both the objective measuring methods and subjective responses, while testing the thermal properties linked to a microclimatic volume formed between the layers of garments forming the ensemble. Neither was determined the limiting value of the microclimatic volume for outerwear garments, after which the thermal insulation will start to decrease due to convection. By taking the advantage of the precise three-dimensional (3D) body scanning technology and reverse engineering 3D CAD tool, the volume of the microclimatic air layers formed under outerwear garments was determined to study the impact of the ensemble’s microclimatic volume on the overall insulation value, measured by means of the thermal manikin. The jacket with the smaller microclimatic volume provided 5.2–13.5% less insulation than wider jackets, while the ensembles with tighter jackets showed 0.74–1.9% less insulation in static and 0.9– 2.7% more insulation in dynamic conditions, thus proving that the limiting value of the microclimatic volume is greater than previously reported for three-layered ensembles. The effective thermal insulation value was reduced in average by 20.98–25.34% between standing and moving manikins. The thermal manikins are designed for steadystate measurements and do not work well under transient conditions, so three human subjects were employed as evaluators of the clothing thermal quality. In cooler climatic conditions, the measured physiological parameters and subjects’ grades pointed to discomfort while wearing ensembles with tighter jackets.
25 April 2018 in The Journal of the Textile Institute
Some of the researches expressed connection between the numbers and size of the microclimatic air layers on thermal insulation of clothing. The insulation of the ensembles is much affected by the air enclosed between the clothing layers. In loose fitting clothing, they are less subjected to compression and thus add more to the overall thermal insulation. The heat and the moisture are released from the body into the microclimatic layers, subsequently changing properties of the entrapped air. The volume of the microclimatic air layers was investigated by the use of non-contact 3D CAD method. The temperature and humidity changes of microclimatic layers were also observed. This paper represents layer by layer quantification of the clothing ensemble volume with jackets as covering garment and the impact of the microclimatic volume on the clothing insulation. The three-level laboratory testing was performed with human subjects dressed in selected ensembles.
According to conclusions agreed to in the 1995 Report of the World Summit for Social Development and the 2015 Sustainable Development Summit, seventeen sustainable development goals (SDGs) have been ratified and published as the 2030 Agenda for Sustainable Development. In 2022, the 8th Environment Action Programme was legally agreed upon, following the six European Green Deal priorities. These SDGs serve as a constant reminder of the importance of globally coordinated actions in compliance with the theory of sustainable development. However, more than a constant reminder, this international agreement should become the foundation for necessary change. On 22 July 2024, the daily global average temperature reached a new record high. The EU treaties signed between 1951 and 2007 laid the foundation for the creation of EU environmental policy. However, those EU treaties, along with environmental policy, form merely a non-binding and minimum set of priorities without any sanctions imposed for illegal practices. In 2021, EU member countries adopted the European Climate Law as the first legally binding document seeking to achieve goals set by the Paris Agreement and the European Green Deal. Any further EU sustainable development policies are dependent on global cooperation as a key element of survival. With the EU’s dependent on the rest of the world for its energy, the forcing of any obligatory change will be hard to achieve. This proves the importance of the 17th SDG, agreed in 2015. Only global partnership for sustainable development can prevent further damage to our ecosystem and achieve priorities set by the EU and UN agendas. The review aims to present the connection between sustainable development (SD) goals defined by the European Commission, for which the most important aspects are the need to meet the environmental requirements to protect future needs in the long run, and to confront the shortcomings of European law-making practices, in which most crucial reforms are presented as non-binding legal acts. Finally, in 2024 members of the European Parliament established an extended list of environmental crimes to be regarded as punishable offences and replaced the Environmental Crime Directive, making criminal activities and offences potentially legally punishable; however, it is yet to be seen how this initiative will be incorporated within the national legislations of each EU member country and to what extent.
25 February 2021 in International Journal of Occupational Safety and Ergonomics
3D scanning and CAD technology is used in engineering and ergonomics practice for several years, due to their admissibility in producing accurate 3D object representation, scan data restoration and modification. Lately the application was extended for reconstructing and modelling 3D scan data of the human body, since it enables tracing the geometry information and precise measurement analysis. In this study, this technology was applied to analyse the scanned models of dressed human body. The changes in microclimatic air distribution and clothing area due to changing upper limb positions, simulating functional reaching movements for the aircrew personnel, were calculated using 3D scanning and CAD technology. The results have proven the posture representing the overall lateral limit of reach to be the best posture for the volume and area identification by means of the 3D scanning. The study will further serve as basis to modify clothing prototypes for improved thermal protection.