Some of the researches expressed connection between the numbers and size of the microclimatic air layers on thermal insulation of clothing. The insulation of the ensembles is much affected by the air enclosed between the clothing layers. In loose fitting clothing, they are less subjected to compression and thus add more to the overall thermal insulation. The heat and the moisture are released from the body into the microclimatic layers, subsequently changing properties of the entrapped air. The volume of the microclimatic air layers was investigated by the use of non-contact 3D CAD method. The temperature and humidity changes of microclimatic layers were also observed. This paper represents layer by layer quantification of the clothing ensemble volume with jackets as covering garment and the impact of the microclimatic volume on the clothing insulation. The three-level laboratory testing was performed with human subjects dressed in selected ensembles.
The demand for polyester production has doubled in recent years. This paper describes energy-efficiency improvements in industrial polyester production through process optimisation, which includes the possibility of fuel savings for dry saturated steam production. Decreasing fuel consumption in processes with condensate, as well as flue-gas heat recovery, offers process efficiency growth and thermal pollution reduction. Also, the use of solar energy as an energy source is proposed. A solarised process without condensate and flue-gas heat recovery results in a natural gas saving of 61%. Using feed-water preheating together with condensate recovery reduces gas consumption by 66%. Fuel savings of 72% are shown using a solar field collector combined with a feed-water tank and economiser (ECO) for boiler-feed-water preheating, with a positive side effect of flue gases cooling from 204°C to 95°C. With an air preheater for combustion-air preheating together with a solar field and feed-water tank, the fuel saving becomes 71%, while the flue gas temperature diminishes from 204 to 64°C. The hybrid system, which includes a solar collector, boiler feed tank, ECO and air preheater, achieves natural gas saving up to 73% and a flue gas exhaust temperature of just 41°C.
One of the main processes of shoe-sole production is injection molding, in which the desired shape is achieved by injecting a heated thermoplastic polymer in a highly plastic state under high pressure into the mold cavity. The study shows the energy analysis and share of electricity costs in the process of injection into the mold cavity to achieve the desired shape and describe the production process of PVC. Although fairly accurate energy-consumption comparison in the injection-molding process is almost unachievable since it depends on the type of machine, feedstock and molded product, it is still crucial for optimizing energy efficiency. The analysis showed that the basic process requirements of shoe-sole injection molding requires electrical energy in the amount of 5.76 kWh per pair of produced soles, while an increase in energy efficiency and environmental pollution reduction can be achieved by the return of process condensate, with a return share of Y = 80%. The price of electricity per pair of manufactured shoe soles is calculated, and given the fluctuations regarding fossil fuel market, the heat recovery potential leading to fossil-fuel savings in PVC production is analyzed.