Chao Yun Sheng

Mr. Chao Yun Sheng


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 April 2021 in Processes
Verified
Journal Article
Open access
PDF file
Kai-Shing YangKai-Shing Yang
Kai-Shing Yang
CSChao Yun Sheng
Chao Yun Sheng
CHChia-Hsing Hsieh
Chia-Hsing Hsieh
MCMin-Lun Chai
Min-Lun Chai
CWChi-Chuan Wang
Chi-Chuan Wang
This study examines the applicability of the ice storage systems in the small commercial refrigerated showcases through experimental analysis. R-404A is used as the working fluid and various influence of parameter settings and improvements, are discussed in details. In the ice storage system, the condenser is changed from air-cooling (refrigeration mode) to an immersion type that is placed in an ice storage tank, the corresponding condensing temperature and pressure are reduced appreciably. This increased the efficiency and can effectively reduce the peak power consumption. The reduction of the condensing temperature and pressure increased the coefficient of performance (COP) from 3.6 (refrigeration mode) to 6.35 (melting mode), effectively enhancing the refrigeration efficiency. The results indicated that the ice storage system could effectively increase the coefficient of performance from 3.6 to 6.35 during ice melting when compared to the conventional refrigeration system. It also can shift approximately 35% of the power during peak hours and lower the energy cost by USD$ 17.13 per month.

1 January 2025 in Journal of Enhanced Heat Transfer
Verified
Journal Article
Closed access
PDF file
CSChao Yun Sheng
Chao Yun Sheng
WLWei-Chieh Liang
Wei-Chieh Liang
CWChi-Chuan Wang
Chi-Chuan Wang
This study investigated the influence of bubble injection on the heat transfer performance of vertically oriented heat sinks under a 1U immersion tank. Two different fin spacings (2.7 mm and 1.4 mm) were assessed and ICE-15M dielectric oil was employed for testing. The effect of a baffle was also investigated. Without the help of the additional baffle, the thermal resistance could be reduced by 40% for a heat sink with a 1.4 mm fin spacing with bubbling, whereas the reduction was limited to approximately 29% for a 2.7 mm fin spacing with bubbling. The baffle could mitigate the bypass flow outside the heat sink and DRAM. However, oil flow still bypassed the heat sink toward the DRAM. Adding airflow could appreciably reduce the thermal resistance, and this was applicable for both fin spacings. The thermal resistance was reduced by approximately 11-23% with a fin spacing of 2.7 mm, whereas with a fin spacing of 1.4 mm, a pronounced reduction in the thermal resistance of about 18-47% was found. However, the effect of the air flowrate on the reduction in thermal resistance was very small with bubbling. For a smaller fin spacing of 1.4 mm, the higher air flowrate could even offset the heat transfer enhancement due to airflow blockage at the entrance. The supplied power and oil flowrate had a negligible influence on the rising behavior of the bubbles, and the bubble distribution alongside the fin channels was comparatively uniform.