1 September 2016 in International Journal of Mineral Processing
1 December 2019 in Bilimsel Madencilik Dergisi
In this study, open circuit single and two stage industrial scale vibrating ball mill (VBM) grinding performance of raw (uncrushed) cement clinker was investigated using different mill feed size distributions and grinding ball size configurations. The mill was modelled for the test cases using perfect mixing mathematical modelling approach. Different ball size configurations were applied in the grinding tests to estimate the effect of ball size configuration on grinding performance. Proposed coarse ball size configuration (30-20-15mm) was determined to increase the size reduction performance of single stage VBM grinding when coarse mill feed material was fed to the VBM (F50=185μm) as compared to the finer mill feed case (F50=24μm). VBM grinding performance was determined to increase with finer mill feed material (F50=24μm) and application of finer ball size configuration (10-8-6mm) in single stage grinding case as compared to the two stage grinding case.
26 June 2026 in Mining, Metallurgy & Exploration
Dry batch ball mill grinding tests were performed on a low-grade chromite ore to evaluate ball size distribution fineness effect on size reduction performance by using a mill feed with full size distribution (-3.35 mm material) instead of using narrow size ranges as used in conventional batch dry grinding kinetic tests mentioned in the literature. Ball mill feed material was also prepared by jaw crushing and dry rod milling. High chromium casted iron multi-size ball distributions with weighted average ball sizes of 36.70 mm, 25.45 mm and 21.18 mm were used to evaluate the effect of ball size distribution fineness on dry size reduction performance. Industrial scale conditions were simulated with the laboratory scale conditions in terms of ball mill feed size distribution and multi-size ball charge distributions. 80% and 50% cumulative passing sizes of mill feed and products were determined to characterize size reduction ratios. Bond’s energy equation was used to calculate and evaluate specific comminution energy consumption (kWh/t) in batch tests. Variations in size reduction performance and comminution energy consumption were evaluated as a function of time. Findings indicated that by using 17 mm and 15 mm ball sizes in the charge distributions, size reduction performance could be increased at finer size ranges. Ball charge distribution with a weighted average ball size of 25.45 mm was determined to be the optimum ball distribution. The ball charge distribution fineness effects could have been reflected on the size reduction performance successfully with the applied test methodology. Research results provided some useful insights into the industrial scale operations.
1 June 2018 in Bilimsel Madencilik Dergisi
The purpose of the study is to assess the grinding and classification performance of aconventional Polysius® two-compartment ball mill and a Sepol® dynamic air classifier closedcircuit process at Portland CEMI/42.5R and Portland composite CEMII/32.5R cement productiontypes. For this purpose, industrial scale sampling surveys were performed around the circuit.JKSimMet Steady State Mineral Processing Software was used to perform mass balance aroundthe circuits. Size reduction performance of the ball mill was determined for the sampling cases.Classification performance of the dynamic air classifier was evaluated based on the efficiencycurve approach. It was determined that, approximately 12% circuit capacity increase could beachieved in composite cement production when ball mill, ball mill filter and air classifier powerconsumptions were considered. This figure corresponded to overall energy savings of 7% in ballmill grinding.