The increasing world population generates huge amounts of wastewater as well as large energy demand. Additionally, fossil fuel’s combustion for energy production causes the emission of greenhouse gases (GHG) and other pollutants. Therefore, there is a strong need to find alternative green approaches for wastewater treatment and energy production. Microalgae biorefineries could represent an effective strategy to mitigate the above problems. Microalgae biorefineries are a sustainable alternative to conventional wastewater treatment processes, as they potentially allow wastewater to be treated at lower costs and with lower energy consumption. Furthermore, they provide an effective means to recover valuable compounds for biofuel production or other applications. This review focuses on the current scenario and future prospects of microalgae biorefineries aimed at combining wastewater treatment with biofuel production. First, the different microalgal cultivation systems are examined, and their main characteristics and limitations are discussed. Then, the technologies available for converting the biomass produced during wastewater treatment into biofuel are critically analyzed. Finally, current challenges and research directions for biofuel production and wastewater treatment through this approach are outlined.

The major downfalls of the microalgal biorefinery are low volume of high value product accumulation, low biomass productivity and high cultivation costs. Here, we aimed to improve the biomass productivity of the industrially relevant Picochlorum sp. BDUG 100241 strain. The growth of Picochlorum sp. BDUG 100241 was investigated under different cultivations conditions, including photoautotrophic (with light), mixotrophic (1% glucose, with light) and heterotrophic (1% glucose, without light). Among them, Picochlorum sp. BDUG100241 showed the highest growth in the mixotrophic condition. Under different (1%) carbon sources’ supplementation, including glucose, sodium acetate, glycerol, citric acid and methanol, Picochlorum sp. BDUG100241 growth was tested. Among them, sodium acetate was found to be most suitable carbon source for Picochlorum sp. BDUG 100241 growth, biomass (1.67 ± 0.18 g/L) and biomolecule productivity. From the different concentrations of sodium acetate (0, 2.5, 5.0, 7.5 and 10 g/L) tested, the maximum biomass production of 2.40 ± 0.20 g/L with the biomass productivity of 95 ± 5.00 mg/L/d was measured from 7.5 g/L in sodium acetate. The highest total lipid (53.50 ± 1.70%) and total carotenoids (0.75 ± 0.01 µg/mL) contents were observed at the concentration of 7.5 g/L and 5.0 g/L of sodium acetate as a carbon source, respectively. In conclusion, the mixotrophic growth condition containing 7.5 g/L of sodium acetate showed the maximum biomass yield and biomolecule accumulation compared to other organic carbon sources.