A solution towards realizing color chromaticity stabilized InGaN RGB light-emitting diode (LED) is proposed and demonstrated. The InGaN/GaN MQWs play a key role in light emission from the LEDs and photodetection from the photodetectors (PDs). The spectral overlaps between the emission and absorption spectra are measured and the photocurrents of the PDs exhibit linear behavior with increasing LED driving currents. The solution involves the use of RGB chips with monolithically-integrated PDs that detect the levels of light output from an individual chip in real-time, whose photocurrent signals are fed to LED driver circuits that make use of the signal to provide a driving current that stabilizes the light output. Adoption of this feedback strategy results in CIE coordinates drifts of $\Delta$ (0.003, 0.005) over the 400-hr duration of testing, proving to be an effective way of stabilizing color chromaticity from RGB LEDs.
31 January 2019 in IEEE Transactions on Power Electronics
In this paper, a gallium nitride (GaN)-based single-inductor multiple-output (SIMO) dc-ac inverter, which generates multiple frequencies at the ac outputs, is introduced. The proposed time-multiplexed switching sequences enable the SIMO inverter to simultaneously generate sinusoidal-like outputs with different frequencies. In the absence of a parasitic body diode in the GaN transistor and with correct bias voltage, the proposed inverter requires no additional blocking diodes and/or cascaded power switches while still ensuring unidirectional flow of the inductor current for proper circuit operation. Compared with its silicon counterpart, this GaN-based inverter achieves a simplified circuit structure, reduced component count, small form factor, increased power density, and high efficiency. A practical application of this inverter is to act as a single wireless power transmitter which concurrently drives multiple transmitter coils at different frequencies for multi-standard wireless power transfer. A hardware prototype of a single-inductor three-output inverter producing three distinct resonant frequencies, namely, 100, 200, and 300 kHz, is constructed. The effectiveness of the proposed switching sequences and control method for this inverter is experimentally verified. No cross regulation is observed across the three individual ac outputs.
13 July 2018 in IEEE Transactions on Power Electronics
In this paper, a nonisolated buck-boost single-inductor multiple-output (SIMO) dc–ac inverter for driving multiple independent high-frequency ac outputs of medium power is proposed. Compared with traditional bridge-type inverters, the proposed buck-boost SIMO inverter achieves 1) a smaller component count, 2) fully independent power control of its outputs, 3) better scalability in increasing the number of ac output channels, and 4) higher power efficiency. Operating in pseudo-continuous conduction mode, the rated power of each output channel of this inverter can be high while attaining zero cross regulation. The scalability factor of the proposed inverter is formally investigated and the theoretical maximum number of ac outputs is analytically derived. The targeted application of this SIMO-based inverter is for driving multiple transmitter coils to realize versatile multidevice medium-power wireless power transfer. A hardware prototype of a single-inductor three-output buck-boost inverter delivering a medium power of 8.4 W per output channel has been constructed. It is experimentally verified that precise and independent current regulation of individual transmitter coil is achievable with the proposed inverter.
17 June 2020 in IEEE Journal of Emerging and Selected Topics in Power Electronics
In this paper, a non-isolated single-inductor multiple-output (SIMO) DC-AC buck-derived hybrid converter for simultaneously driving multiple independent AC and DC loads by employing only a single inductor in the power stage, is proposed. Compared with the prior art, the proposed SIMO-based hybrid converter carries the conspicuous advantages of (i) a simple, compact and low-cost implementation of the power stage, (ii) reduced component count, (iii) high power density, (iv) increased output power, better flexibility and scalability in realizing any combinations of AC and/or DC loads, and (vi) high efficiency. By operating in pseudo-continuous conduction mode (PCCM), this hybrid converter enables wireless and wired power transfer at medium-power level without cross-regulation. In practice, this converter can serve as a Qi-compliant hybrid charger with multiple transmitting coils and USB charging ports for quick and concurrent multi-device charging. A hardware prototype of a single-inductor four-output (SIFO) buck-derived hybrid converter is constructed. The experimental results show that the SIFO converter produces a rated output power of 20 W and a maximum efficiency of around 88 %.
21 December 2018 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Phosphor-coated light-emitting diode (PC-LED) is the dominant LED technology for public lighting. This paper presents a comprehensive theory for analyzing and modeling phosphor coating in white light-emitting diodes (LEDs) as a dynamic light converter. The new PC-LED model not only obeys the traditional diode equation, it includes the energy-storage and transient effects of the phosphor coating. Major control variables include energy storage in and the luminous flux from the phosphor coating. This new model enables the dynamic variations of luminous flux and energy storage and power loss in phosphor-coating to be accurately predicted. Part-1 of this paper provides the details of the theory and analysis leading to the new PC-LED model under the framework of the photo-electro-thermal theory. Details of the model parameter determination, model setup and experimental verification are included in Part-2. The model offers the important power loss equation of the phosphor coating which highlights the factors affecting the heat loss and the coating’s blackening effects. This equation can be used by engineers to design LED drivers in order to reduce the coating temperature and the blackening effects and to prolong LED lifetime.
24 July 2017 in IEEE Transactions on Power Electronics
In this paper, a nonisolated dc-ac inverter topology, which enables a true single-stage direct conversion from a single dc input supply to multiple ac output power sources by using only one inductor in the power stage, is proposed. Compared with the conventional multiple-output parallel half-bridge or full-bridge inverters, the proposed single-stage single-inductor multiple-output (SIMO) inverter topology achieves a smaller number of inductors and power switches, high power density, scalability to multiple ac outputs, and independent power controllability for each ac output. A useful application of the proposed SIMO inverter is to drive an array of transmitting coils simultaneously for wireless power transfer applications. An experimental prototype has been developed to demonstrate the effectiveness of a single-inductor three-output boost-derived inverter without cross regulation. Experimental results show that precise and independent peak voltage regulation of each individual sinusoidal ac output is attainable with the proposed SIMO inverter.