To improve the performance of the conventional p-GaN gate AlGaN/GaN high electron mobility transistors (HEMTs), we propose an improved design for e-mode AlGaN/GaN HEMT with a gate stack β-Ga2O3/p-GaN structure. The simulated results show that the proposed device increases the threshold voltage and the gate breakdown voltage in comparison with the conventional p-GaN gate HEMT due to the use of the β-Ga2O3 layer, which has an additional β-Ga2O3/p-GaN heterojunction and decreases the strength of electric field in the gate region. Moreover, the proposed device exhibits a lower off-state leakage current, which can be attributed to the less donor ionized density. In addition, the impacts of the β-Ga2O3 layer thickness are investigated. There is a trade-off between β-Ga2O3 layer thickness and the performance of the proposed device, including threshold voltage, gate breakdown, and saturation drain current.
Optoelectronic synaptic devices are a promising technology for overcoming the von Neumann bottleneck, meeting the demand from rapidly advancing artificial intelligence for faster, more energy-efficient neuromorphic computing. This study fabricated an optically tunable synaptic transistor based on an AlGaN/GaN heterostructure, which enables the implementation of neuromorphic vision processing. The device exhibits a low dark current in the cutoff region and a high photo-to-dark current ratio of 1.47 × 108, highlighting its excellent photoresponsivity. Under UV illumination, the device demonstrates synaptic behaviors such as excitatory postsynaptic current and paired-pulse facilitation. By tuning the time, power, and number of optical pulses, dynamic transitions from short-term memory to long-term memory are achieved, effectively emulating visual persistent memory. Furthermore, an optically modulated convolutional neural network is implemented, achieving a classification accuracy of 93.86% on the Fashion-MNIST dataset. These results validate the potential of the proposed device for neuromorphic vision processing applications.
We have designed an AlGaN/GaN-based metal-heterostructure-metal (MHM) ultraviolet (UV) phototransistor (PT) with bent-Gate Structure. After partial etching of the AlGaN/GaN layer, an interdigital Ti/Al/Ni/Au metal stack was deposited on the GaN absorber layer to form an ohmic contact, which is in lateral contact with the AlGaN/GaN heterojunction to form a MHM structure. A bent gate was embedded between the interdigital ohmic electrodes to control the switching state of the two-dimensional electron gas (2DEG) channel. More importantly, benefiting from the strong polarization electric field in the lengthwise direction and the 2DEG high mobility channel in the lateral direction at the AlGaN/GaN heterojunction interface of the device, the device shows excellent photodetection performance: a peak responsivity (R) of 6 × 10 4 A/W can be obtained under 265 nm UV irradiation, with a corresponding detectivity (D*) of 8.28 × 10 16 cm·W −1 ·Hz 1/2 ; and a responsivity of 1.8 × 10 4 A/W can be obtained under 360 nm UV irradiation, with a corresponding D* of 2.48× 10 16 cm·W −1 ·Hz 1/2 . In addition, we have analyzed and investigated the operating principle of the designed device and the control mechanism of the bent gate using the theoretically simulated results of the device.
22 June 2021 in Journal of Physics D: Applied Physics
This research investigates electrical properties of E-mode AlGaN/GaN HEMTs with n-type β-Ga2O3/p-GaN gate stack under different gate work functions of 4.6, 5.1 and 5.7 eV, respectively. The simulated results show that the device with gate work function of 5.7 eV exhibits the largest threshold voltage of 2.8 V while having the lowest saturation drain current of 0.15 A mm−1, which can be ascribed to the device having the highest Schottky barrier, leading to the least electrons collected at the AlGaN/GaN interface. Moreover, the device with gate work function of 5.7 eV shows the largest gate breakdown voltage as well as the lowest off-state gate leakage, which can be attributed to the least strength of electric field in the Ga2O3 layer. Additionally, the Fowler–Nordheim equation was used to study the mechanisms of off-state leakage.
24 December 2024 in IEEE Transactions on Electron Devices
Indium arsenide (InAs)-based fin field-effect transistors (FinFETs) are emerging as potential alternatives to traditional Si technologies due to their exceptional carrier mobility and high saturation velocity, which are crucial for advancing Moore’s law. Recent developments in operating principles, processing methods, and architectural designs have enabled the aggressive scaling of InAs-based FinFETs and their successful integration with Si wafers, bringing their key performances comparable to that of Si-based counterparts. However, several obstacles prevent their widespread adoption, including difficulties in creating uniform fin structures, optimizing metal contacts, and controlling interface defects. This review explores the recent innovations in the processing techniques and architectural designs of InAs-based FinFETs, with a focus on overcoming scaling and integration challenges. In addition, it proposes new technological approaches to address the limitations, supporting the continued evolution of InAs-based technology.