Pablo Stefani

Dr. Pablo Stefani

Instituto de Investigaciones en Ciencia y Tecnología de Materiales (INTEMA), Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET), Universidad Nacional de Mar del Plata (UNMdP), Av. Colón 10850, Mar del Plata 7600, Argentina
orcid

Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 March 2011 in BioResources
Verified
Journal Article
Closed access
LLLeandro Ludueña
Leandro Ludueña
DFDiana Fasce
Diana Fasce
VAVera Alejandra Alvarez
Vera Alejandra Alvarez
Pablo StefaniPablo Stefani
Pablo Stefani
The present work deals with the use of multiple-step procedures to obtain valuable sub-products, including nanocellulose, from rice husk. Each sub-product was characterized after every step by analyzing the chemical composition (mainly based on thermogravimetric analysis, Fourier transformed infrared spectra, and X-ray diffraction) and morphology (using visual observations and scanning electron microscopy). The results clearly showed that the selected procedure gave the possibility to separate silica in the first step and then to purify the resultant material, leading to nanocellulose production. All acquired sub-products can be used as additives and fillers in a very wide range of applications. The obtained results will be useful both from technological and academic points of view, mainly for people working in the field of biocomposites. The final material could give added value to a raw biomass material source such as rice husk.

29 November 2022 in Polymers
Verified
Journal Article
Open access
PDF file
NMNicolas Montoya-Escobar
Nicolas Montoya-Escobar
DODaniel Ospina-Acero
Daniel Ospina-Acero
JVJorge Andrés Velasquez-Cock
Jorge Andrés Velasquez-Cock
CHCatalina Gómez Hoyos
Catalina Gómez Hoyos
AGAngélica Serpa Guerra Angélica Serpa Guerra
Angélica Serpa Guerra Angélica Serpa Guerra
Pablo StefaniPablo Stefani
Pablo Stefani
Cellulose crystallinity can be described according to the crystal size and the crystallinity index (CI). In this research, using Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) methods, we studied the crystallinity of three different types of cellulose: banana rachis (BR), commercial cellulose (CS), and bacterial cellulose (BC). For each type of cellulose, we analyzed three different crystallization grades. These variations were obtained using three milling conditions: 6.5 h, 10 min, and unmilled (films). We developed a code in MATLAB software to perform deconvolution of the XRD data to estimate CI and full width at half-maximum (FWHM). For deconvolution, crystalline peaks were represented with Voigt functions, and a Fourier series fitted to the amorphous profile was used as the amorphous contribution, which allowed the contribution of the amorphous profile to be more effectively modeled. Comparisons based on the FTIR spectra and XRD results showed there were no compositional differences between the amorphous samples. However, changes associated with crystallinity were observed when the milling time was 10 min. The obtained CI (%) values show agreement with values reported in the literature and confirm the effectiveness of the method used in this work in predicting the crystallization aspects of cellulose samples.

11 January 2006 in Journal of Applied Polymer Science
Verified
Journal Article
Closed access
PDF file
Pablo StefaniPablo Stefani
Pablo Stefani
VCV. Cyras
V. Cyras
ABA. Tejeira Barchi
A. Tejeira Barchi
AVA. Vazquez
A. Vazquez

17 March 2021 in Polymers
Verified
Journal Article
Open access
PDF file
MRMaría Jordá Reolid
María Jordá Reolid
Jaume Gomez-CaturlaJaume Gomez-Caturla
Jaume Gomez-Caturla
JIJuan Ivorra-Martinez
Juan Ivorra-Martinez
Pablo StefaniPablo Stefani
Pablo Stefani
SRSandra Rojas-Lema
Sandra Rojas-Lema
Luis Quiles-CarrilloLuis Quiles-Carrillo
Luis Quiles-Carrillo
The present study reports on the development of wood plastic composites (WPC) based on micronized argan shell (MAS) as a filler and high-density polyethylene obtained from sugarcane (Bio-HDPE), following the principles proposed by the circular economy in which the aim is to achieve zero waste by the introduction of residues of argan as a filler. The blends were prepared by extrusion and injection molding processes. In order to improve compatibility between the argan particles and the green polyolefin, different compatibilizers and additional filler were used, namely polyethylene grafted maleic anhydride (PE-g-MA 3 wt.-%), maleinized linseed oil (MLO 7.5 phr), halloysite nanotubes (HNTs 7.5 phr), and a combination of MLO and HNTs (3.75 phr each). The mechanical, morphological, thermal, thermomechanical, colorimetric, and wettability properties of each blend were analyzed. The results show that MAS acts as a reinforcing filler, increasing the stiffness of the Bio-HDPE, and that HNTs further increases this reinforcing effect. MLO and PE-g-MA, altogether with HNTs, improve the compatibility between MAS and Bio-HDPE, particularly due to bonds formed between oxygen-based groups present in each compound. Thermal stability was also improved provided by the addition of MAS and HNTs. All in all, reddish-like brown wood plastic composites with improved stiffness, good thermal stability, enhanced compatibility, and good wettability properties were obtained.

1 February 2015 in Fibers and Polymers
Verified
Journal Article
Closed access
PDF file
DMDiana C. Marin
Diana C. Marin
AVAntonela Vecchio
Antonela Vecchio
LLLeandro N. Ludueña
Leandro N. Ludueña
DFDiana Fasce
Diana Fasce
VAVera Alejandra Alvarez
Vera Alejandra Alvarez
Pablo StefaniPablo Stefani
Pablo Stefani

1 July 2020 in Journal of Building Engineering
Verified
Journal Article
Closed access
ENE.S. Nicolao
E.S. Nicolao
PLP. Leiva
P. Leiva
MCMayra Carolina Chalapud
Mayra Carolina Chalapud
RRR.A. Ruseckaite
R.A. Ruseckaite
ECE.M. Ciannamea
E.M. Ciannamea
Pablo StefaniPablo Stefani
Pablo Stefani