The possibility of the application of an unmanned aerial vehicle (UAV) in search and rescue activities in a deep underground mine has been investigated. In the presented case study, a UAV is searching for a lost or injured human who is able to call for help but is not able to move or use any communication device. A UAV capturing acoustic data while flying through underground corridors is used. The acoustic signal is very noisy since during the flight the UAV contributes high-energetic emission. The main goal of the paper is to present an automatic signal processing procedure for detection of a specific sound (supposed to contain voice activity) in presence of heavy, time-varying noise from UAV. The proposed acoustic signal processing technique is based on time-frequency representation and Euclidean distance measurement between reference spectrum (UAV noise only) and captured data. As both the UAV and “injured” person were equipped with synchronized microphones during the experiment, validation has been performed. Two experiments carried out in lab conditions, as well as one in an underground mine, provided very satisfactory results.

Machinery condition prognosis systems use long-term historical data to predict the remaining useful life (RUL). One of the critical steps to reach this purpose is to segment long-term data into two or several degradation stages (healthy, unhealthy, critical stage). Finding a changing point between stages may be a crucial preliminary task for further prediction of degradation process. However, finding the accurate partition into two or more stages is a challenging task in actual application when noise inherent in the observed process exhibits non-Gaussian characteristics. In this paper, a framework for data-driven segmentation is presented for prognosis of machinery long-term data in presence of heavy-tailed distributed noise with finite variance. It is assumed that three different stages are inherent in degradation process and each segment of data follows a specific trend (constant, linear, exponential or polynomial). At first, data is divided into three parts. Trend functions are fitted to the data by using robust regression method , and cumulative error is calculated. This process is done iteratively for all possible partitions into three intervals to find the segmentation which minimizes the error. The framework has been tested via empirical analysis of estimators of the changing points obtained in Monte Carlo simulations. Also, discussed approaches are applied to the real data. In such measurement, data that are commonly available (in condition monitoring systems) is aggregated from the raw signal and sampled at long intervals. Finally, effectiveness of the segmentation results is assessed by comparing them with envelope frequency analysis of raw signal to confirm the fact that detected changing points coincide with start time of the fault in the machine or not.

Timely diagnosis and prognosis based on degradation symptoms are essential steps for condition-based maintenance (CBM) to guarantee industrial safety and productivity. Most industrial machines operate under variable operating conditions. This time-varying operating condition can accelerate the machinery’s degradation process. It may have a massive influence on data and impede the process of diagnosis and prognosis of the machinery. Therefore, in this paper, to address the mentioned problems, we introduced an approach for modelling non-stationary long-term condition monitoring data. This procedure includes separating random and deterministic parts and identifying possible autodependence hidden in the random sequence, as well as potential time-dependent variance. To achieve these objectives, we employ a time-varying coefficient autoregressive (TVC-AR) model within a Bayesian framework. However, due to the limited availability of diverse run-to-failure data sets, we validate the proposed procedure using a simulated degradation model and two widely recognized benchmark data sets (FEMTO and wind turbine drive), which demonstrate the model’s effectiveness in capturing complex non-stationary degradation characteristics.