Antonija Harasti

Ms. Antonija Harasti

Department of Hydroscience and Engineering, Faculty of Civil Engineering, University of Zagreb, Croatia
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 December 2021 in Water
Verified
Journal Article
Open access
PDF file
AHAntonija Harasti
Antonija Harasti
Gordon GiljaGordon Gilja
Gordon Gilja
Kristina PotočkiKristina Potočki
Kristina Potočki
MLMartina Lacko
Martina Lacko
Bridge piers on large rivers are often protected from scouring using launchable stone, such as a riprap sloping structure. While such scour countermeasures are effective for pier protection, they significantly alter flow conditions in the bridge opening by overtopping flow and flow contraction, deflecting the formation of the scour hole downstream and exposing the downstream riverbed to additional scour. This paper provides a comprehensive and relevant review of bridge scour estimation methods for piers with a riprap sloping structure installed as a scour countermeasure. Research on empirical methods for bridge scour estimation is reviewed and analyzed with formulae used for comparable structures—complex pier formulae and formulae for river training structures. A summary of relevant formulae applicable to piers with installed scour countermeasures is provided, as well as a discussion on the possible future research directions that could contribute to the field.

25 April 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
AHAntonija Harasti
Antonija Harasti
Gordon GiljaGordon Gilja
Gordon Gilja
NANikola Adžaga
Nikola Adžaga
MŽMark Žic
Mark Žic
Throughout the lifespan of a bridge, morphological changes in the riverbed affect the variable action-imposed loads on the structure. This emphasizes the need for accurate and reliable data that can be used in model-based projections targeted for the identification of risk associated with bridge failure induced by scour. The aim of this paper is to provide an analysis of scour depth estimation on large sand-bed rivers under the clear water regime, detect the most influential (i.e., explanatory) variables, and examine the relationship between them and scour depth as a response variable. A dataset used for the analysis was obtained from the United States Geological Survey’s extensive field database of local scour at bridge piers, i.e., the Pier-Scour Database (PSDB-2014). The original database was filtered to exclude the data that did not reflect large sand-bed rivers, and several influential variables were omitted by using the principal component analysis. This reduction process resulted in 10 influential variables that were used in multiple non-linear regression scour modeling (MNLR). Two MNLR models (i.e., non-dimensional and dimensional models) were prepared for scour estimation; however, the dimensional model slightly overperformed the other one. According to the Pearson correlation coefficients (r), the most influential variables for estimating scour depth were as follows: Effective pier width (r = 0.625), flow depth (r = 0.492), and critical and local velocity (r = 0.474 and r = 0.436), respectively. In the compounded hydraulic-sediment category, critical velocity had the greatest impact (i.e., the highest correlation coefficient) on scour depth in comparison to densimetric Froude and critical Froude numbers that were characterized by correlation coefficients of r = 0.427 and r = 0.323, respectively. The remaining four variables (local and critical bed shear stress, Froude number, and particle Reynolds number) exhibited a very weak correlation with scour depth, with r < 0.3.

29 June 2023 in Fluids
Verified
Journal Article
Open access
PDF file
Gordon GiljaGordon Gilja
Gordon Gilja
Robert FliszarRobert Fliszar
Robert Fliszar
AHAntonija Harasti
Antonija Harasti
Manousos ValyrakisManousos Valyrakis
Manousos Valyrakis
High-frequency velocimeters used for flow measurements during laboratory experiments allow the user to select the range for several operation parameters to set up the instrument for optimal velocity measurement. The discrepancies between velocity measurements collected with different instrument configurations can be significant, depending on the flume bed configuration and boundary conditions. The aim of this paper is to quantify the differences in flow velocity profiles measured with Acoustic Doppler Velocimeter Profilers (ADVPs) configured using a combination of profiling parameters: Ping Algorithm (PA), Transmit Pulse Size (TPS), and Cell Size (CS). Whereas in Part I of this research, the goal was to identify the optimal probe configuration for downstream measurement of the complex hydraulic structure (pier protected with riprap) based on a match of the flow rate with measurements from other instruments, in this paper, effect of distinct probe configuration on velocity profile and turbulent kinetic energy (TKE) is demonstrated. Differences between ADVPs’ configurations were analyzed through sensitivity analysis with the intention to calculate and compare any discrepancies in the velocity measurements for all the three measured velocity components: streamwise u, spanwise v and vertical w collected on two characteristic flume cross-sections. The results show that each parameter change has a significant effect on the measured values of each velocity component when compared to the Target Configuration (TC). The largest root-mean-square-error (RMSE) is observed when TPS is changed, followed by CS and PA. Absolute RMSE calculated for TPS change from 4 mm to 1 mm is, on average, 6.30 cm/s, 0.90 cm/s, and 0.82 cm/s for velocity components u, v and w, respectively. Absolute RMSE calculated for CS change from 1 mm to 4 mm is, on average, 4.49 cm/s, 0.88 cm/s, and 0.71 cm/s for velocity components u, v and w, respectively. Absolute RMSE calculated for PA change from Adaptive to Max interval is, on average, 4.04 cm/s, 0.63 cm/s, and 0.68 cm/s for velocity components u, v and w, respectively. For a change in all parameters, RMSE is greater for the cross-section downstream of the pier than for the approach cross-section: on average, 90%, 57% and 54% for a change in the PA, TPS, and CS, respectively.

23 March 2020
Verified
Conference Paper
Open access
Gordon GiljaGordon Gilja
Gordon Gilja
AHAntonija Harasti
Antonija Harasti
Kristina PotočkiKristina Potočki
Kristina Potočki
MVMatej Varga
Matej Varga
NANikola Adžaga
Nikola Adžaga
Large number of bridges in Europe is at the end of their life span, while the frequency of occurrence for extreme climatic events, driven by climate change, is increasing. Floods influence morphodynamic changes in the riverbed, such as scouring of the riverbed next to the bridge substructure, that can undermine the overall stability of the bridge. Placement of riprap protection around bridge piers is an approach that doesn’t solve scouring problem, it rather displaces the scour hole elsewhere in the river channel, where its location is unknown because it is formed in the interaction between the flow and the structure, in site-specific conditions. Traditional approach to scour monitoring is effective only if surveys are conducted during the flood conditions, while the data acquired post-flood can underestimate the full potential of flood hazard. Detailed field surveys of hydraulic parameters during floods are essential in the understanding of morphodynamic evolution of the river channel, but are often scarce because they are time-consuming and require extensive resources (e.g. the survey equipment). Therefore, the majority of research was conducted using hydraulic flumes where both flow and the riverbed conditions are idealized The goal of the R3PEAT project (Remote Real-time Riprap Protection Erosion AssessmenT on large rivers) is to bridge the gap between the real-time scour hole development and flow environment through development of real-time scour monitoring system. The research focus of the project is investigation of scouring processes next to the riprap protection around bridge piers - existing structures whose stability and safety are unknown in the hydraulic environment under the influence of climate change. Research methodology combines experimental investigations on scaled physical model (Phase I) with 3D numerical model (Phase II) into hybrid modelling approach, calibrated and validated with field surveys. The research objectives of the project are: (1) develop ScourBuoy prototype (2); calibrate the physical model with field surveys; (3) improve existing empirical equations for equilibrium scour hole development using hybrid modelling approach; (4) investigate the dependence between turbulent flow characteristics and temporal scour hole development and (5) investigate dependence between turbulent conditions and incipient motion of sediment particles. The impact of the proposed project on the bridge management systems is expected through the development of a practical remote real-time system for erosion estimation around the riprap protection on large rivers that can be basis for the real-time decision support system.Acknowledgment:This work has been supported in part by Croatian Science Foundation under the project R3PEAT (UIP-2019-04-4046)

23 September 2022 in Fluids
Verified
Journal Article
Open access
PDF file
Gordon GiljaGordon Gilja
Gordon Gilja
Robert FliszarRobert Fliszar
Robert Fliszar
AHAntonija Harasti
Antonija Harasti
Manousos ValyrakisManousos Valyrakis
Manousos Valyrakis
Flow mapping around bridge piers is crucial in estimating scour development potential under different flow conditions. The reliable measurement of turbulence and the estimation of Reynolds stress can be achieved on scaled models under controlled laboratory experiments using high-frequency Acoustic Doppler Velocimeter Profilers (ADVP) for flow measurement. The aim of this paper was to obtain operation parameters for an array of Vectrino Profilers for turbulent flow field measurement to reliably measure the flow field around bridge piers. Laboratory experiments were conducted on a scaled river model set up in an open channel hydraulic flume. Flow field data were measured on three characteristic profiles, each containing five measurement points collected by ADVPs configured as an array of two instruments. The determination of the operation parameters was done as a two-step process—calibration through the flume’s pump flow rate and verification with Acoustic Doppler Current Profiler RioGrande field data. Based on the results, the following setup for ADVPs’ operation parameters can be used to obtain reliable flow data in the scour hole next to the bridge pier: adaptive Ping Algorithm, Transmit Pulse Size of 4 mm and Cell Size of 1 mm.

3 March 2021
Verified
Other
Open access
Gordon GiljaGordon Gilja
Gordon Gilja
NKNeven Kuspilić
Neven Kuspilić
DRDavor Romić
Davor Romić
MZMonika Zovko
Monika Zovko
AHAntonija Harasti
Antonija Harasti
This paper presents the concept of the project “Advanced monitoring of soil salinization risk in the Neretva Delta agroecosystem” (Delta Sal). Aim of the project is to develop and implement an advanced system for monitoring, forecasting and reporting the water and soil conditions in the Neretva Delta agroecosystem that is primarily used for agriculture. Selected pilot location is specific due to its biodiversity – water network within the delta consists of surface irrigation and drainage canal network, carst aquifer dominated by the tidal regime while also replenished by the freshwater from the upstream river flow, all of which are used for citrus fruits production while at the same time influencing the water regime of adjacent protected salt marshes ecosystem. Neretva Delta is dominated by the traditional farming methods practiced in the polder systems. Salt water intrusion is present in the entire delta, which is reflecting on the irrigation water quality and subsequently on the agricultural production of citruses that are salt-sensitive horticultural crops. Extensive spatial and temporal monitoring of water quality data through multisensory monitoring stations will be used for development of guidelines for salt stress alleviation in citrus fruits. This paper presents the outline of the project, methodology of analysis and selection of representative agricultural parcels for the research, rationale of farmer’s current decision-making that affects the agricultural landscape pattern and proposed monitoring network. Monitoring is focused on continuous real-time measurements of surface water levels and index water velocity using radars, shallow and deep piezometers for monitoring of ground water levels, rain gauges, multiparameter water quality measurements (dissolved oxygen, water depth, electrical conductivity, total dissolved solids, salinity, pH, oxidation reduction potential, temperature, nitrate and chloride). Data is transmitted in real-time to the cloud-based interface for remote access. Integrated data management will be used in the upcoming project stages for analysis of salt water intrusion on Neretva Delta agricultural production. Final outcome of the project are guidelines for Neretva Delta management with the future outlook in the climate change context, compliant with UNFCCC convention under which this area falls into one of the most vulnerable areas in Croatia. Acknowledgment:„This work has been supported in part by the European Regional Development Fund under the project Advanced monitoring of soil salinization risk in the Neretva Delta agroecosystem (KK.05.1.1.02.0011)“