Plasma jets are sources of repetitive and stable ionization waves, meant for applications where they interact with surfaces of different characteristics. As such, plasma jets provide an ideal testbed for the study of transient reproducible streamer discharge dynamics, particularly in inhomogeneous gaseous mixtures, and of plasma–surface interactions. This topical review addresses the physics of plasma jets and their interactions with surfaces through a pedagogical approach. The state-of-the-art of numerical models and diagnostic techniques to describe helium jets is presented, along with the benchmarking of different experimental measurements in literature and recent efforts for direct comparisons between simulations and measurements. This exposure is focussed on the most fundamental physical quantities determining discharge dynamics, such as the electric field, the mean electron energy and the electron number density, as well as the charging of targets. The physics of plasma jets is described for jet systems of increasing complexity, showing the effect of the different components (tube, electrodes, gas mixing in the plume, target) of the jet system on discharge dynamics. Focussing on coaxial helium kHz plasma jets powered by rectangular pulses of applied voltage, physical phenomena imposed by different targets on the discharge, such as discharge acceleration, surface spreading, the return stroke and the charge relaxation event, are explained and reviewed. Finally, open questions and perspectives for the physics of plasma jets and interactions with surfaces are outlined.

Thomson scattering using a Bragg grating notch filter is used to determine the electron properties of a pulsed, kHz-driven, non-thermal atmospheric pressure plasma jet in helium expanding in air. The plasma jet is allowed to freely expand or interact with targets with different electrical properties, i.e. glass, copper and water. With the same setup, Raman scattering is used to determine spatially- and time-resolved the densities and rotational temperatures of oxygen and nitrogen molecules entrained into the jet. Fast imaging is used to determine the development of the discharge in the plasma jet as well as its behavior in the plasma-target interaction zone. As the discharge approaches the target, the rise of electron density was followed by the fall of electron temperature. The discharge is influenced only over a few millimeters before it hits the target. The electron density and temperature during the spreading of the discharge on the low-permittivity target are measured to be resp. 2 × 10 ¹⁹ m ⁻³ and ≈1 eV. During the return stroke on the high-permittivity and the metallic target the densities rise with a factor 1.5 resp. 2.2, and the temperature with a factor 2.5 for both cases. The discharges on the high- and low-permittivity targets extinguished soon after the initial impact of the ionization front, while the diffuse discharge on the metallic target extinguished only after the end of the voltage pulse (with a duration of 1 μ s). In the diffuse discharge the electron temperature reaches 3.4 eV, the gas temperature increases by approximately 100 K and the electron density increases by approximately a factor three with respect to before its formation.

The article describes the complex study of the interaction of a helium plasma jet with distilled water and saline. The discharge development, spatial distribution of the excited species, electric field measurement results and the results of the Schlieren imaging are presented. The results of the experiments showed that the plasma–liquid interaction could be prolonged with the proper choice of the gas composition between the jet nozzle and the target. This depends on the gas flow and the target distance. Increased conductivity of the liquid does not affect the discharge properties significantly. An increase of the gas flow enables an extension of the plasma duration on the liquid surface up to 10 µ s, but with a moderate electric field strength in the ionization wave. In contrast, there is a significant enhancement of the electric field on the liquid surface, up to 30 kV cm ⁻¹ for low flows, but with a shorter time of the overall plasma liquid interaction. Ignition of the plasma jet induces a gas flow modification and may cause turbulences in the gas flow. A significant influence of the plasma jet causing a mixing in the liquid is also recorded and it is found that the plasma jet ignition changes the direction of the liquid circulation.

A parametric study of the impingement of a helium kHz atmospheric pressure plasma jet on a flat glass surface was performed by means of time-resolved intensified charge-coupled device imaging. The development of the plasma on the target is linked to the plasma evolution in the source and governed by the power supply. The glass surface takes part in the elongation of the plasma jet by the virtue of two mechanisms: the local enhancement of the electric field and the supply of pre-deposited charge. The evidence for the pre-deposited charge is the formation of a sheath on the glass surface, and the faint discharge formed on the glass surface during the negative voltage slope starting at the maximum of the negative current peak. The influence of the gas flow dynamics taking into account various gas flows, incident angles and distances is more important for the behaviour of the discharge on the surface than the voltage amplitude or the geometry of the source. The capacitance of the target strongly modifies the interaction with the plasma jet and increases the deposited surface charge density, featuring a streamer-like propagation mechanism in the case of high electric field enhancement at the surface.