Modern wireless and satellite communication systems require antennas of higher gain, wider bandwidth, multiband support and smaller design dimensions. In providing better impedance matching and size reduction, fractal geometry is one of the suitable technique. This allows antenna to operate at different frequencies. The patch antenna with fractal geometry is selected due to ease in fabrication and low cross polarization radiation. In this paper, Sierpinski Carpet Fractal patch antenna (SCFPA) is designed in second and third iterations. The third iteration design of the antenna is modified in order to obtain bandwidth enhancement. The Proposed antenna resonated at 2.6 GHz and 6.6 GHz. The antenna finds its applications in WiMAX and Satellite communications transmissions.
This paper outlines the design and validation of a four-port compact Multi-Input Multi-Output (MIMO) antenna engineered to provide reconfigurable band notches within the ultra-wideband spectrum. The antenna features a circular monopole engraved with split ring slots along its radiating section, while a U-shaped slot is etched onto the feed line to facilitate band notches at specific frequencies—4.3 GHz (corresponding to INSAT), 6.8 GHz (aligned with Wi-Fi-6E), and 8.3 GHz (pertaining to X-band satellite). To ensure proper isolation, the MIMO elements are arranged orthogonally, and a decoupling periodic structure is strategically interposed between these elements to enhance isolation further. The incorporation of a PIN diode within the U-shaped slot introduces reconfigurability into the band notching mechanism. The MIMO antenna operates in two distinct modes depending upon the state of the PIN diode, either activated (ON) or deactivated (OFF). In the former mode, the antenna offers switchable band notches across three frequencies, while in the latter mode, it offers band notches at two specific frequencies. The validity of the antenna’s performance is validated through real-time fabrication and measurement. Both simulated and measured results exhibit a notable correlation. The antenna stands as an appropriate candidate for future cognitive radio applications.
This paper presents about improving stability of the system which can be possible with new FACTS device with more convenient. FACTS devices come under the influence of power electronics equipment. Distributed Power Flow Controller is a FACTS device used for damping low frequency oscillation with new controlling approach. It is valid for a wide range of the operating condition. In this work explain the basic model and its steady state operation, mathematical analysis injection of current control model of the DPFC. Using damping controller used in DPFC facts device as input to implement the task of power oscillation damping .Here this work had a brief study on damping, terminal voltage and excitation voltage at different load conditions, simulation results demonstrate damping low frequency oscillation at nominal, light and heavy loading conditions
27 January 2026 in Wireless Personal Communications