The paper presents the design and implementation of an electromagnetic field monitoring sensor for the measurement of the Terrestrial Truncked Radio (TETRA) signals using low-cost software defined radio (SDR) platforms. The sensor includes: an SDR platform, a Global Positioning System (GPS) module and a hardware control module. Several SDR platforms having different resolutions of the analog–digital converters were tested in the first phase. The control module was implemented in two variants: a fixed one, using a laptop, and a mobile one, using a Raspberry Pi. The tests demonstrate the following achieved performances: instantaneous acquisition band of 5.12 MHz; dynamic range of the input signal level of (−100 to −30) dBm; frequency resolution of 2.5 kHz; portability and flexibility for use in outdoor environments. The sensor allows complete reporting through amplitude-time-frequency-location descriptors, and in the case of the mobile version, the system performs correctly even at a maximum speed of displacement of 120 km/h. The price of the mobile sensor system variant is approximately EUR 320.
In the last years, Software Defined Radio (SDR) platforms, as a result of the facilities offered, have become attractive for applications in the field of electromagnetic field monitoring. Present work aimed to implement a cheap electromagnetic field monitoring system to trace signals specific to the Terrestrial Trunked Radio (TETRA) standard and to check its capabilities. The chosen solution is based on the ADALM-PLUTO SDR platform controlled by a Raspberry Pi 4 device. Testing the system demonstrated the following performances: 5.12 MHz instantaneous acquisition band; dynamic range of the input signal level between (−100…−30) dBm; 2.5 kHz frequency resolution; portability and flexibility for use in outdoor environments; low cost.
The paper investigates the possibility of using Software Defined Radio (SDR) platforms in assessing exposure to electromagnetic radiation emitted by sources specific to 3G and 4G generations. Critical parameters of SDR platforms that can limit their performance are the sampling frequency and the receiving resolution of the analog to digital converter (ADC). The performed tests showed that the 8-bit ADC resolution has an influence on the amplitude's dynamic range, i.e. when evaluating exposure to high-level signals (greater than -40 dBm), the accuracy is consistently diminished. The sampling frequency influences the bandwidth of the channel, and broadband signals (e.g. 20 MHz - in case of 4G) impose requirements for the performance of the SDR platform. For an average-priced SDR platform, such as HackRF One, measurements can be conducted with an acceptable accuracy at most on 5 MHz bandwidths.
1 January 2009 in Advances in Electrical and Computer Engineering
Electromagnetic environment becomes day by day more congested. Radio communication systems in the short range are now part of everyday life, and there is a need to also assess the pollut ...
The measurement of realistic exposure levels of quasi - stochastic signals from the IEEE 802.11ac communication standard was achieved by applying the complementary cumulative distribution function mode of a real - time spectrum analyzer connected to a laptop. Statistics were used to highlight the differences between the data transfer directions.
The paper is focused on the electromagnetic exposure assessment in the proximity of a Terrestrial Trunked Radio (TETRA) terminal. For the first time distinct measurements of the electric field component (E) and of the magnetic field component (H) are presented in the distance range 8-20 cm. The results show that the E-field component has a greater prevalence on the exposure. Maximum values of 100% for E, and 17% for H component respectively were encountered in the near field of the terminal, if compared to the occupational limits given in the ICNIRP protective guidelines.