Annamaria Sarbu

Mrs. Annamaria Sarbu

"Nicolae Balcescu" Land Forces Academy, Sibiu, Romania
+1
orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Annamaria SarbuAnnamaria Sarbu
Annamaria Sarbu
Simona MiclausSimona Miclaus
Simona Miclaus
Angela DigulescuAngela Digulescu
Angela Digulescu
PBPaul Bechet
Paul Bechet
A suitable metric to describe human exposure to microwaves emitted by wireless communication devices is still incomplete. By using both theoretical analysis and experimental validation (in controlled and real deployed networks), we analyze and compare the specificity of exposure due to data transmissions in different configurations of fourth and fifth generation wireless fidelity (Wi-Fi) standards in the proximity of a mobile device. Measurements made use of the capability of the amplitude probability density incorporated in a real-time spectrum analyzer, proving its agility of highlighting different user exposure profiles. The results are presented comparatively and indicate that, in Wi-Fi networks, the modulation and coding scheme (MCS) should be used together with the duty cycle for an improved exposure assessment. The present work introduces the emitted energy density per bit in describing the user’s exposure to Wi-Fi signals and proves its superiority in characterizing the true levels of exposure for the IEEE 802.11n and 802.11ac standards of communication.

3 July 2023 in Electronics
Verified
Journal Article
Open access
PDF file
Mirela SorecauMirela Sorecau
Mirela Sorecau
EȘEmil Șorecău
Emil Șorecău
Annamaria SarbuAnnamaria Sarbu
Annamaria Sarbu
PBPaul Bechet
Paul Bechet
The increase in channel bandwidth and peak-to-average power ratio (PAPR) of modern communication standards poses a serious challenge to performing channel power (CP) and complementary cumulative distribution function (CCDF) measurements in real-time using standard measurement solutions based on spectrum analyzers (SA). Recently, Software Defined Radio (SDR) technology has become a viable alternative to the conventional real-time spectrum monitoring approach based on SA due to its reduced cost. Therefore, in this paper, we propose a novel, innovative, agile and cost-effective solution to enable both CP and CCDF measurements on a state-of-the-art SDR platform. The proposed solution exploits the ability of the SDR equipment to access signal samples in the time domain and defines both CP and CCDF-type measurements. The two measurement functions are software implemented in GNU Radio by designing customized blocks and integrated into a graphical user interface. The proposed system was first tested and parameterized in a controlled environment using emitted signals specific to the IEEE 802.11ax family of wireless local area networks. After parameterization, the SDR-based system was used for over-the-air measurements of signals emitted in the 4G+, 5G and 802.11ax communication standards. By performing the measurement campaign, we have demonstrated the capabilities of the measurement system in performing real-time measurements on broadband channels (up to 160 MHz for IEEE 802.11ax). Altogether, we have proved the usability of CP and CCDF measurement functions in providing valuable insights into the power distribution characteristics of signals emitted by the latest communication standards. By exploiting the versatility of SDR technology, we have enabled a cost-effective solution for advanced real-time statistical measurements of modern broadband signals.

1 March 2019
Verified
Conference Paper
Closed access
ABAndrei Cristian Bechet
Andrei Cristian Bechet
Robert HelbetRobert Helbet
Robert Helbet
IBIulian Bouleanu
Iulian Bouleanu
Annamaria SarbuAnnamaria Sarbu
Annamaria Sarbu
Simona MiclausSimona Miclaus
Simona Miclaus
PBPaul Bechet
Paul Bechet
The paper investigates the possibility of using Software Defined Radio (SDR) platforms in assessing exposure to electromagnetic radiation emitted by sources specific to 3G and 4G generations. Critical parameters of SDR platforms that can limit their performance are the sampling frequency and the receiving resolution of the analog to digital converter (ADC). The performed tests showed that the 8-bit ADC resolution has an influence on the amplitude's dynamic range, i.e. when evaluating exposure to high-level signals (greater than -40 dBm), the accuracy is consistently diminished. The sampling frequency influences the bandwidth of the channel, and broadband signals (e.g. 20 MHz - in case of 4G) impose requirements for the performance of the SDR platform. For an average-priced SDR platform, such as HackRF One, measurements can be conducted with an acceptable accuracy at most on 5 MHz bandwidths.

1 June 2020 in International conference KNOWLEDGE-BASED ORGANIZATION
Verified
Journal Article
Open access
PDF file
Annamaria SarbuAnnamaria Sarbu
Annamaria Sarbu
ANAnd
And
DNDumitru Neagoie
Dumitru Neagoie
In this article we present software defined radio (SDR) instrumentation used for interfering or jamming Wi-Fi networks. A Wi-Fi network analyzer application was used together with a low cost, commercially available SDR, Hack RF one, to conduct aimed interference on a 802.11 b/g/n network. A GNU radio flowchart was used to control the radio transceiver (SDR) by emitting a jamming signal aimed towards the targeted client by means of a directional antenna. Various signal bandwidths and distance from the targeted device were tested to characterize the adequate parameters of an effective jamming signal with respect to the calculated signal to noise ratio (SNR). Jamming efficiency was evaluated by means of a Wi-Fi connectivity speed test application installed on the targeted device, in order to measure connectivity degradation if complete jamming was not possible. Results presented suggest that Wi-Fi jamming is possible by means of SDR technology, providing insights on the methodology used and initial optimisation procedures in the test environment.

12 November 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Annamaria SarbuAnnamaria Sarbu
Annamaria Sarbu
RPRobert Papa
Robert Papa
Angela DigulescuAngela Digulescu
Angela Digulescu
Cornel IoanaCornel Ioana
Cornel Ioana
This paper presents the development and validation of a hybrid beamforming system based on software-defined radio (SDR), designed for telecommunications engineering education. The system provides an agile and user-friendly platform that allows students to observe, test, and evaluate beamforming techniques in real time. The platform integrates a multichannel SDR device (USRP N310) with traditional radiofrequency equipment and open-source software, facilitating hands-on learning experiences. The paper details the proposed hardware and software architecture and documents the calibration and validation phases. The testing and validation processes were conducted using a 3.5 GHz antenna array in both indoor and outdoor environments. The results demonstrated the system’s effectiveness in achieving the desired beam orientations, with experimental results aligning closely with simulation and theoretical predictions. Significant differences in the radiation patterns observed between the indoor and outdoor measurements were documented, highlighting the impact of environmental factors on beamforming performance. The insights gained from this research provide valuable contributions to the education of future telecommunications engineers, enhancing their understanding of practical beamforming applications and the integration of modern SDR technology.

16 June 2021
Verified
Conference Paper
Closed access
HRHelbet Robert
Helbet Robert
BPBechet Paul
Bechet Paul
MSMiclaus Simona
Miclaus Simona
Annamaria SarbuAnnamaria Sarbu
Annamaria Sarbu
This paper presents the design, implementation and testing of a broadband real-time electromagnetic field monitoring system. The system is based on a Software Defined Radio (SDR) platform that allows the implementation of three synchronous reception channels. The tests have been performed both in laboratory conditions and in case of measuring signals emitted by a wireless device connected to the 4G communication network. The results of testing showed that the system has real-time monitoring capabilities for a channel with a bandwidth of at least 10MHz.