The present paper investigates the influence of the specimen size of EN-AW6082 wrought aluminium alloy subjected to very high cycle fatigue (VHCF) tests. The hourglass specimens were tested under fully reversed loading condition, up to 109 cycles, by means of the ultrasonic fatigue testing machine developed by Italsigma® (Italy). Three specimens groups were considered, with a diameter in the middle cross-section ranging from 3 mm up to 12 mm. The stress field in the specimens was determined numerically and by strain gauge measurements in correspondence of the cross-section surface. The dispersion of experimental results has been accounted for, and data are reported in P-S-N diagrams. The decrease in fatigue resistance with increasing specimen size is evident. Theoretical explanation for the observed specimen-size effect is provided, based on Fractal Geometry concepts, allowing to obtain scale independent P-S*-N curves. The fatigue life expectation in the VHCF regime of the EN-AW6082 aluminium alloy full-scale components is rather overestimated if it is assessed only from standard small specimens of 3 mm in diameter. Experimental tests carried out on larger specimens, and a proper extrapolation, are required to assure safe structural design.
15 June 2020 in Fatigue & Fracture of Engineering Materials & Structures
In the present paper, a very high cycle fatigue test campaign carried out with an ultrasonic testing machine up to 1010 cycles is presented. The aluminum alloy hourglass and dog‐bone samples have dimensions spanning over a very wide range, with the diameter in the middle cross‐section comprised between 3 and 30 mm. From the experimental results, the influence of structural size can be clearly detected, and it is possible to observe a transition between small scales, where the size effect is more pronounced, and larger scales, where the size effect is vanishing. This phenomenon can be explained in an effective way by adopting a multifractal formalism, which is equipped with the probabilistic treatment of the statistical dispersion of experimental data.
Size effects concern the anomalous scaling of relevant mechanical properties of materials and structures over a sufficiently wide dimensional range. In the last few years, thanks to technological advances, such effects have been experimentally detected also in the very high cycle fatigue (VHCF) tests. Research groups at Politecnico di Torino are very active in this field, observing size effects on fatigue strength, fatigue life and fatigue limit up to the VHCF regime for different metal alloys. In addition, different theoretical models have been put forward to explain these effects. In the present paper, two of them are introduced, respectively based on fractal geometry and statistical concepts. Furthermore, a comparison between the models and experimental results is provided. Both models are able to predict the decrement in the fatigue life and in the conventional fatigue limit.