AZHAGU JAISUDHAN JAISUDHAN

Dr. AZHAGU JAISUDHAN JAISUDHAN


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 July 2021 in Journal of Healthcare Engineering
Verified
Journal Article
Open access
PDF file
Osamah IbrahimOsamah Ibrahim
Osamah Ibrahim
CRCarlos Andrés Tavera Romero
Carlos Andrés Tavera Romero
AJAZHAGU JAISUDHAN JAISUDHAN
AZHAGU JAISUDHAN JAISUDHAN
GVG. Vinuja
G. Vinuja
This study implements the VLSI architecture for nonlinear-based picture scaling that is minimal in complexity and memory efficient. Image scaling is used to increase or decrease the size of an image in order to map the resolution of different devices, particularly cameras and printers. Larger memory and greater power are also necessary to produce high-resolution photographs. As a result, the goal of this project is to create a memory-efficient low-power image scaling methodology based on the effective weighted median interpolation methodology. Prefiltering is employed in linear interpolation scaling methods to improve the visual quality of the scaled image in noisy environments. By decreasing the blurring effect, the prefilter performs smoothing and sharpening processes to produce high-quality scaled images. Despite the fact that prefiltering requires more processing resources, the suggested solution scales via effective weighted median interpolation, which reduces noise intrinsically. As a result, a low-cost VLSI architecture can be created. The results of simulations reveal that the effective weighted median interpolation outperforms other existing approaches.

Verified
Journal Article
Open access
PDF file
AJAZHAGU JAISUDHAN JAISUDHAN
AZHAGU JAISUDHAN JAISUDHAN
GPGunasekaran Perumalsamy
Gunasekaran Perumalsamy
VSvimal Shanmuganathan
vimal Shanmuganathan
Sangsoon LimSangsoon Lim
Sangsoon Lim
KMKaliappan Madasamy
Kaliappan Madasamy
Amit VermaAmit Verma
Amit Verma
The goal of 5G wireless networks is to address the growing need for network services among users. User equipment has progressed to the point where users now expect diverse services from the network. The latency, reliability, and bandwidth requirements of users can all be classified. To fulfil the different needs of users in an economical manner, while guaranteeing network resources are resourcefully assigned to consumers, 5G systems plan to leverage technologies like Software Defined Networks, Network Function Virtualization, and Network Slicing. For the purpose of ensuring continuous handover among network slices, while catering to the advent of varied 5G application scenarios, new mobility management techniques must be adopted in Sliced 5G networks. Users want to travel from one region of coverage to another region without any fading in their network connection. Different network slices can coexist in 5G networks, with every slice offering services customized to various QoS demands. As a result, when customers travel from one region of coverage to another, the call can be transferred to a slice that caters to similar or slightly different requirements. The goal of this study was to develop an intra- and inter-slice algorithm for determining handover decisions in sliced 5G networks and to assess performance by comparing intra- and inter-slice handovers. The proposed work shows that an inter-slice handover algorithm offers superior quality of service when compared to an intra-slice algorithm.

3 April 2023 in International Journal on Recent and Innovation Trends in Computing and Communication
Verified
Journal Article
Open access
PDF file
KPKDV Prasad
KDV Prasad
DPD Palanikkumar
D Palanikkumar
DVDankan Gowda V
Dankan Gowda V
NHNaziya Hussain
Naziya Hussain
AJAZHAGU JAISUDHAN JAISUDHAN
AZHAGU JAISUDHAN JAISUDHAN
ANAnil Kumar N
Anil Kumar N
Mobile Ad-hoc Networks (MANET’s) are wireless networks that are capable of operating without any fixed infrastructure. MANET routing protocols must adhere to strict secrecy, integrity, availability and non-repudiation criteria. In MANETs, attacks are roughly categorised into two types: active and passive. An active attack attempts to modify or remove data being transferred across a network. On the other hand, passive attack does not modify or erase the data being sent over the network. The majority of routing protocols for MANETs were built with little regard for security and are therefore susceptible to a variety of assaults. Routing technologies such as AODV and dynamic source routing are quite common. Both however are susceptible to a variety of network layer attacks, including black holes, wormholes, rushing, byzantine, information disclosure. The mobility of the nodes and the open architecture in which the nodes are free to join or leave the network keep changing the topology of the network. The routing in such scenarios becomes a challenging task since it has to take into account the constraints of resources of mobile devices. In this an analysis of these protocols indicates that, though proactive routing protocols maintain a route to every destination and have low latency, they suffer from high routing overheads and inability to keep up with the dynamic topology in a large sized network. The reactive routing protocols in contrast have low routing overheads, better throughput and higher packet delivery ratio. AODVACO-PSO-DHKE Methodology boosts throughput by 10% while reducing routing overhead by 7%, latency by 8% and energy consumption by 5%. To avoid nodes always being on, a duty cycle procedure that's also paired with the hybrid method is used ACO-FDR PSO is applied to a 100-node network and NS-3 is used to measure various metrics such as throughput, latency, overhead, energy consumption and packet delivery ratio.

31 March 2022 in Earth Science Informatics
Verified
Journal Article
Closed access
PDF file
AJAZHAGU JAISUDHAN JAISUDHAN
AZHAGU JAISUDHAN JAISUDHAN
SPS. Periyanayagi
S. Periyanayagi

18 July 2022 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
GSGurpreet Singh
Gurpreet Singh
JAJothi Prabha Appadurai
Jothi Prabha Appadurai
VPVaratharaju Perumal
Varatharaju Perumal
KKK. Kavita
K. Kavita
TKT. Ch Anil Kumar
T. Ch Anil Kumar
KUK. Umamaheswari
K. Umamaheswari
Cutting force is one of the significant parameters in the metal cutting process. The metal cutting process is the primary in the production and manufacturing industry to produce high-quality products. Every production and manufacturing needs to develop a technology, i.e., a cooling or lubrication system at the cutting zone while doing the metal cutting process. This current work focuses on developing the machine learning algorithm by using three different types of regression processes, namely, polynomial regression process (PR), support vector regression (SVR), and gaussian process regression (GPR). These three processes are developed to predict the machine learning force, cutting power, and cutting pressure by controlling primary factors (cutting speed, depth of cut, and feed rate). The cooling or lubrication process also affects the machining process. We need to maintain the minimum qualifications to perform under minimum quality lubrication (MQL) and high-pressure coolant (HPC). The ANN algorithm was used to run different parameters, and these parameters are optimized for cutting force.

7 November 2024 in The Bioscan
Verified
Journal Article
Open access
PDF file
PGP. Gunasekaran
P. Gunasekaran
VSV Sudha
V Sudha
NMNarendra B Mustare
Narendra B Mustare
RPRamesh Babu Pittala
Ramesh Babu Pittala
AJAZHAGU JAISUDHAN JAISUDHAN
AZHAGU JAISUDHAN JAISUDHAN
GBG. Charles Babu
G. Charles Babu
Medical guidance systems make extensive use of machine learning methods. A medical diagnostic aids in obtaining several characteristics that correspond to the various illness variants. It is probable to have redundant, irrelevant, and relevant aspects that reflect a disease with the use of various diagnostic techniques. The illness may be incorrectly classified due to redundant characteristics. Consequently, the amount of the data & computational complexity is decreased by eliminating the superfluous characteristics. Finding a suitable feature subset for efficient classification is a challenging problem. This calls for a thorough search over the dataset's sample space. This paper's primary goal is to identify the best feature subset with higher classification accuracy for the diagnosis of cardiovascular diseases using a metaheuristic algorithm. The best traits for illness detection are found using the Artificial Bee Colony (ABC) method, which is based on swarm intelligence. Support Vector Machine (SVM) categorisation is employed to assess ABC's capability. Dataset of Indian Heart Disease is used to verify the suggested algorithm's performance. According to the experimental findings, ABC-SVM performs well when compared with feature selection via reverse ranking. In addition, the results show that with only eight characteristics, the proposed approach accomplished maximum classification precision.