The development and continuity of consistent long-term data records from similar overlapping satellite observations is critical for global monitoring and environmental change assessments. We developed an empirical approach for inter-calibration of satellite microwave brightness temperature (T_b) records over land from the Advanced Microwave Scanning Radiometer for EOS (AMSR-E) and Microwave Scanning Radiometer 2 (AMSR2) using overlapping T_b observations from the Microwave Radiation Imager (MWRI). Double Differencing (DD) calculations revealed significant AMSR2 and MWRI biases relative to AMSR-E. Pixel-wise linear relationships were established from overlapping T_b records and used for calibrating MWRI and AMSR2 records to the AMSR-E baseline. The integrated multi-sensor T_b record was largely consistent over the major global vegetation and climate zones; sensor biases were generally well calibrated, though residual T_b differences inherent to different sensor configurations were still present. Daily surface air temperature estimates from the calibrated AMSR2 T_b inputs also showed favorable accuracy against independent measurements from 142 global weather stations (R² ≥ 0.75, RMSE ≤ 3.64 °C), but with slightly lower accuracy than the AMSR-E baseline (R² ≥ 0.78, RMSE ≤ 3.46 °C). The proposed method is promising for generating consistent, uninterrupted global land parameter records spanning the AMSR-E and continuing AMSR2 missions.

The launch of the National Oceanic and Atmospheric Administration (NOAA)/ National Aeronautics and Space Administration (NASA) Suomi National Polar-orbiting Partnership (S-NPP) and its follow-on NOAA Joint Polar Satellite Systems (JPSS) satellites marks the beginning of a new era of operational satellite observations of the Earth and atmosphere for environmental applications with high spatial resolution and sampling rate. The S-NPP and JPSS are equipped with five instruments, each with advanced design in Earth sampling, including the Advanced Technology Microwave Sounder (ATMS), the Cross-track Infrared Sounder (CrIS), the Ozone Mapping and Profiler Suite (OMPS), the Visible Infrared Imaging Radiometer Suite (VIIRS), and the Clouds and the Earth’s Radiant Energy System (CERES). Among them, the ATMS is the new generation of microwave sounder measuring temperature profiles from the surface to the upper stratosphere and moisture profiles from the surface to the upper troposphere, while CrIS is the first of a series of advanced operational hyperspectral sounders providing more accurate atmospheric and moisture sounding observations with higher vertical resolution for weather and climate applications. The OMPS instrument measures solar backscattered ultraviolet to provide information on the concentrations of ozone in the Earth’s atmosphere, and VIIRS provides global observations of a variety of essential environmental variables over the land, atmosphere, cryosphere, and ocean with visible and infrared imagery. The CERES instrument measures the solar energy reflected by the Earth, the longwave radiative emission from the Earth, and the role of cloud processes in the Earth’s energy balance. Presently, observations from several instruments on S-NPP and JPSS-1 (re-named NOAA-20 after launch) provide near real-time monitoring of the environmental changes and improve weather forecasting by assimilation into numerical weather prediction models. Envisioning the need for consistencies in satellite retrievals, improving climate reanalyses, development of climate data records, and improving numerical weather forecasting, the NOAA/Center for Satellite Applications and Research (STAR) has been reprocessing the S-NPP observations for ATMS, CrIS, OMPS, and VIIRS through their life cycle. This article provides a summary of the instrument observing principles, data characteristics, reprocessing approaches, calibration algorithms, and validation results of the reprocessed sensor data records. The reprocessing generated consistent Level-1 sensor data records using unified and consistent calibration algorithms for each instrument that removed artificial jumps in data owing to operational changes, instrument anomalies, contaminations by anomaly views of the environment or spacecraft, and other causes. The reprocessed sensor data records were compared with and validated against other observations for a consistency check whenever such data were available. The reprocessed data will be archived in the NOAA data center with the same format as the operational data and technical support for data requests. Such a reprocessing is expected to improve the efficiency of the use of the S-NPP and JPSS satellite data and the accuracy of the observed essential environmental variables through either consistent satellite retrievals or use of the reprocessed data in numerical data assimilations.

The Suomi National Polar-orbiting Partnership (SNPP) satellite was launched on 28 October, 2011, and carries the Advanced Technology Microwave Sounder (ATMS) onboard. Currently, ATMS performance in orbit is very stable and the calibration parameters (e.g., noise and accuracy) meet specifications. This study documents an ATMS calibration error budget model and its results for community reference. The calibration accuracy is also verified with the ATMS pitch maneuver observations of cold space. It is shown that the ATMS pitch maneuver cold space observations at center positions are inconsistent with the values predicted by the instrument calibration error budget model. The biases also depend on scan angle. This scan-angle dependence may be caused by the ATMS plane reflector emission. Thus, a physical model is developed to simulate the radiation emitted from the reflector and is recommended as part of ATMS radiance calibration to further improve the sensor data record (SDR) data quality.

Accurate global observations from space are critical for global climate change study. However, atmospheric temperature trend derived from spaceborne microwave instruments remains a subject of debate, due mainly to the uncertainty in characterizing the long-term drift of instrument calibration. Thus, a highly stable target with a well-known microwave radiation is required to evaluate the long-term calibration stability. This paper develops a new model to simulate the lunar emission at microwave frequencies, and the model is then used for monitoring the stability of the Advanced Technology Microwave Sounder (ATMS) onboard Suomi NPP satellite. It is shown that the ATMS cold space view of lunar radiation agrees well with the model simulation during the past five years and this instrument is capable of serving the reference instrument for atmospheric temperature trending studies, and connecting the previous generation of microwave sounders from NOAA-15 to the future Joint Polar Satellite System Microwave Sounder onboard NOAA-20 satellite.

In recent years, the study of microwave radiation from the Moon’s surface has been of interest to the astronomy and remote sensing communities. Due to the stable geophysical properties of the Moon’s surface, microwave lunar radiation is highly predictable and can be accurately modeled, given sufficient observations from reliable instruments. Specifically, for microwave remote sensing study, if International System of Unit (SI) traceable observations of the Moon are available, the Moon can thus be used as an SI traceable calibration reference for microwave instruments to evaluate their calibration accuracies and assess their long-term calibration stabilities. Major challenges of using the Moon as a radiometric source standard for microwave sensors include the uncertainties in antenna pattern measurements, the reliability of measurements of brightness temperature (T_b) in the microwave spectrum of the lunar surface, and knowledge of the lunar phase lag because of penetration depths at different detection frequencies. Most microwave-sounding instruments can collect lunar radiation data from space-view observations during so-called lunar intrusion events that usually occur several days each month. Addressed in this work based on Moon observations from the Advanced Technology Microwave Sounder and the Advanced Microwave Sounding Unit/Microwave Humidity Sounder are two major issues in lunar calibration: the lunar surface microwave T_b spectrum and phase lag. The scientific objective of this study is to present our most recent progress on the study of lunar microwave radiation based on satellite observations. Reported here are the lunar microwave T_b spectrum and phase lag from 23 to 183 GHz based on observations of microwave-sounding instruments onboard different satellite platforms. For current Moon microwave radiation research, this study can help toward better understanding lunar microwave radiation features over a wide spectrum range, laying a solid foundation for future lunar microwave calibration efforts.

One of the limitations in using spaceborne, microwave radiometer data for atmospheric remote sensing is the nonuniform spatial resolution. Remapping algorithms can be applied to the data to ameliorate this limitation. In this paper, two remapping algorithms, the Backus–Gilbert inversion (BGI) technique and the filter algorithm (AFA), widely used in the operational data preprocessing of the Advanced Technology Microwave Sounder (ATMS), are investigated. The algorithms are compared using simulations and actual ATMS data. Results show that both algorithms can effectively enhance or degrade the resolution of the data. The BGI has a higher remapping accuracy than the AFA. It outperforms the AFA by producing less bias around coastlines and hurricane centers where the signal changes sharply. It shows no obvious bias around the scan ends where the AFA has a noticeable positive bias in the resolution-enhanced image. However, the BGI achieves the resolution enhancement at the expense of increasing the noise by 0.5 K. The use of the antenna pattern instead of the point spread function in the algorithm causes the persistent bias found in the AFA-remapped image, leading not only to an inaccurate antenna temperature expression but also to the neglect of the geometric deformation of the along-scan field-of-views.