Drazan Kozak

Prof. Dr. Drazan Kozak

Mechanical Engineering Faculty, University of Slavonski Brod, Slavonski Brod, Slavonski
orcid

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2019 in Engineering Failure Analysis
Verified
Journal Article
Closed access
Marko KatinićMarko Katinić
Marko Katinić
Drazan KozakDrazan Kozak
Drazan Kozak
IGIvan Gelo
Ivan Gelo
Darko DamjanovićDarko Damjanović
Darko Damjanović

6 May 2020 in Polymers
Verified
Journal Article
Open access
PDF file
Martin VašinaMartin Vašina
Martin Vašina
Katarina MonkovaKatarina Monkova
Katarina Monkova
Peter Pavol MonkaPeter Pavol Monka
Peter Pavol Monka
Drazan KozakDrazan Kozak
Drazan Kozak
JTJozef Tkac
Jozef Tkac
Noise pollution is a negative factor that affects our environment. It is, therefore, necessary to take appropriate measures to minimize it. This article deals with the sound absorption properties of open-porous Acrylonitrile Butadiene Styrene (ABS) material structures that were produced using 3D printing technology. The material’s ability to damp sound was evaluated based on the normal incidence sound absorption coefficient and the noise reduction coefficient, which were experimentally measured by the transfer function method using an acoustic impedance tube. The different factors that affect the sound absorption behavior of the studied ABS specimens are presented in this work. In this study, it was discovered that the sound absorption properties of the tested ABS samples are significantly influenced by many factors, namely by the type of 3D-printed, open-porous material structure, the excitation frequency, the sample thickness, and the air gap size behind the sound-absorbing materials inside the acoustic impedance tube.

9 October 2020 in Materials
Verified
Journal Article
Open access
PDF file
Katarina MonkovaKatarina Monkova
Katarina Monkova
Martin VašinaMartin Vašina
Martin Vašina
Peter Pavol MonkaPeter Pavol Monka
Peter Pavol Monka
Drazan KozakDrazan Kozak
Drazan Kozak
JVJán Vanca
Ján Vanca
Noise has a negative impact on our environment and human health. For this reason, it is necessary to eliminate excessive noise levels. This paper is focused on the study of the sound absorption properties of materials with open-porous structures, which were made of acrylonitrile butadiene styrene (ABS) material using additive technology. Four types of structures (Cartesian, Octagonal, Rhomboid, and Starlit) were evaluated in this work, and every structure was prepared in three different volume ratios of the porosity and three different thicknesses. The sound absorption properties of the investigated ABS specimens were examined utilizing the normal incidence sound absorption and noise reduction coefficients, which were experimentally determined by the transfer function method using a two-microphone acoustic impedance tube. This work deals with various factors that influence the sound absorption performance of four different types of investigated ABS material’s structures. It was found, in this study, that the sound absorption performance of the investigated ABS specimens is strongly affected by different factors, specifically by the structure geometry, material volume ratio, excitation frequency of an acoustic wave, material’s thickness, and air space size behind the tested sound-absorbing materials.

20 January 2022 in Polymers
Verified
Journal Article
Open access
PDF file
Katarina MonkovaKatarina Monkova
Katarina Monkova
Martin VašinaMartin Vašina
Martin Vašina
Peter Pavol MonkaPeter Pavol Monka
Peter Pavol Monka
JVJán Vanca
Ján Vanca
Drazan KozakDrazan Kozak
Drazan Kozak
3D printing technique is currently one of the promising emerging technologies. It is used in many areas of human activity, including acoustic applications. This paper focuses on studying the sound reflection behavior of four different types of 3D-printed open-porous polylactic acid (PLA) material structures, namely cartesian, octagonal, rhomboid and starlit structures. Sound reflection properties were evaluated by means of the normal incidence sound reflection coefficient based on the transfer function method using an acoustic impedance tube. In this study, various factors affecting the sound reflection performance of the investigated PLA samples were evaluated. It can be concluded that the sound reflection behavior of the tested PLA specimens was strongly affected by different factors. It was influenced, not only by the type of 3D-printed open-porous material structure, but also by the excitation frequency, the total volume porosity, the specimen thickness, and the air gap size behind the tested specimen inside the acoustic impedance tube.

17 January 2022 in Materials
Verified
Journal Article
Open access
PDF file
Md Obaidullah AnsariMd Obaidullah Ansari
Md Obaidullah Ansari
Somnath ChattopadhyayaSomnath Chattopadhyaya
Somnath Chattopadhyaya
Joyjeet GhoseJoyjeet Ghose
Joyjeet Ghose
SSSHUBHAM SHARMA
SHUBHAM SHARMA
Drazan KozakDrazan Kozak
Drazan Kozak
DWDominik Walczak
Dominik Walczak
Breakout is one of the major accidents that often arise in the continuous casting shops of steel slabs in Bokaro Steel Plant, Jharkhand, India. Breakouts cause huge capital loss, reduced productivity, and create safety hazards. The existing system is not capable of predicting breakout accurately, as it considers only one process parameter, i.e., thermocouple temperature. The system also generates false alarms. Several other process parameters must also be considered to predict breakout accurately. This work has considered multiple process parameters (casting speed, mold level, thermocouple temperature, and taper/mold) and developed a breakout prediction system (BOPS) for continuous casting of steel slabs. The BOPS is modeled using an artificial neural network with a backpropagation algorithm, which further has been validated by using the Keras format and TensorFlow-based machine learning platforms. This work used the Adam optimizer and binary cross-entropy loss function to predict the liquid breakout in the caster and avoid operator intervention. The experimental results show that the developed model has 100% accuracy for generating an alarm during the actual breakout and thus, completely reduces the false alarm. Apart from the simulation-based validation findings, the investigators have also carried out the field application-based validation test results. This validation further unveiled that this breakout prediction method has a detection ratio of 100%, the frequency of false alarms is 0.113%, and a prediction accuracy ratio of 100%, which was found to be more effective than the existing system used in continuous casting of steel slab. Hence, this methodology enhanced the productivity and quality of the steel slabs and reduced substantial capital loss during the continuous casting of steel slabs. As a result, the presented hybrid algorithm of artificial neural network with backpropagation in breakout prediction does seem to be a more viable, efficient, and cost-effective method, which could also be utilized in the more advanced automated steel-manufacturing plants.

28 August 2023 in Materials
Verified
Journal Article
Open access
PDF file
Mirco D ChapettiMirco D Chapetti
Mirco D Chapetti
Nenad GubeljakNenad Gubeljak
Nenad Gubeljak
Drazan KozakDrazan Kozak
Drazan Kozak
In the field of long-life fatigue, predicting fatigue lives and limits for mechanical components is crucial for ensuring reliability and safety. Fracture mechanics tools have enabled the estimation of fatigue lives for components with small cracks or defects. However, when dealing with defects larger than the microstructural characteristic size, estimating the fatigue resistance of a material requires determining the cyclic resistance curve for the defect-free matrix, which depends on knowledge of the material’s intrinsic fatigue limit. This study focuses on the experimental evidence regarding the intrinsic fatigue limit and its correlation with naturally nucleated non-propagating cracks. Fracture mechanics models for small crack propagation are introduced, and their disparities and limitations are analyzed. The concept of intrinsic fatigue limit is then introduced and applied to reanalyze a recent publication. Methods for estimating the intrinsic fatigue limit are explored and applied to experimental results reported in the literature. The need to clarify and accurately predict the intrinsic fatigue limit is highlighted in alloys where the processing generates defects larger than the microstructural size of the matrix, as often observed in materials and components produced using additive manufacturing.