The use of a single porous mixed ion-electron conducting (MIEC) material as both the oxygen and fuel electrodes in reversible solid oxide cells is of increasing interest, primarily due to the resulting simplified cell design and lower manufacturing costs. In this work, La0.3Sr0.7Fe0.7Cr0.3O3−δ (LSFCr-3) was studied in a 3-electrode half-cell configuration in air, pure CO2 and in a 1 : 1 CO2 : CO mixture, over a temperature range of 650–800 °C. A detailed analysis of the impedance (EIS) data, under both open circuit and polarized conditions, as well as the cyclic voltammetry response of LSFCr-3 has shown that it is very active in all of these environments, but with oxygen evolution being somewhat more facile that oxygen reduction, and CO2 reduction more active than CO oxidation. Evidence for a chemical capacitance, associated with the Fe3+/4+ redox process in LSFCr-3, was also obtained from the EIS and CV data in all gas environments.
1 January 2015 in International Journal of Hydrogen Energy
BaFe0.125Co0.125Zr0.75O3−δ perovskite is a novel and efficient MIEC electrode for IT-SOFCs. Symmetrical cells with an area-specific resistance of 0.13 Ω cm2 at 700 °C and 0.05 Ω cm2 at 800 °C have been prepared.
9 August 2017 in Journal of the Electrochemical Society
Our recent studies have shown that La0.3Ca0.7Fe0.7Cr0.3O3-δ (LCFCr) is an extremely promising material for use as an air electrode in reversible solid oxide cells (RSOFCS), due to its excellent activity towards the oxygen reduction and evolution reactions. LCFCr has also been shown to be a very active catalyst for CO2/CO reactions at the fuel electrode, thus making it a good candidate for use in symmetrical RSOFCs. In the present work, GDC and GDC + LCFCr polymeric precursor solutions were infiltrated into a porous LCFCr scaffold to further enhance the performance, producing a high surface area, nanoporous coating on the LCFCr surface. GDC infiltration resulted in a ca. 2-fold decrease in polarization resistance, specifically lowering the high frequency resistance, which is associated with the electrode/electrolyte interface. When the porous LCFCr electrode structure was co-infiltrated with GDC + LCFCr, the resistance of both the high and low frequency processes decreased, which according to our model, indicates that the quality of both the electrode/electrolyte (high frequency) and solid/gas (low frequency) interfaces were improved. Overall, it was shown to be possible to reduce the polarization resistance of the LCFCr air electrode by up to ca. 2.5 times using these infiltration approaches.