This paper carried out a series of designs, simulations and implementations by using the physical-like mechanism of a bionic quadruped robot dog as a vehicle. Through an investigation of the walking mechanisms of quadrupeds, a bionic structure is proposed that is capable of omnidirectional movements and smooth motions. Furthermore, the kinematic and inverse kinematic solutions based on the DH method are explored to lay the foundation for the gait algorithm. Afterward, a classical compound pendulum equation is applied as the foot-end trajectory and inverse kinematic solutions are combined to complete the gait planning. With appropriate foot–ground contact modeling, MATLAB and ADAMS are used to simulate the dynamic behavior and the diagonal trot gait of the quadruped robot. Finally, the physical prototype is constructed, designed and debugged, and its performance is measured through real-world experiments. Results show that the quadruped robot is able to balance itself during trot motion, for both its pitch and roll attitude. The goal of this work is to provide an affordable yet comprehensive platform for novice researchers in the field to study the dynamics, contact modeling, gait planning and attitude control of quadruped robots.

Over the past few decades, wearable exoskeletons of various forms have been developed to assist human activities or for rehabilitation of movement disorders. However, sustainable exoskeletons with efficient energy harvesting devices still have not been fully explored. In this paper, we propose the design of a lightweight wearable Bowden-cable-actuated soft exoskeleton robot with energy harvesting capability. Unlike previous wearable exoskeletons, the presented exoskeleton uses an electromagnetic generator to both harvest biomechanical energy and to output mechanical torque by controlling an operation mode relay switch based on a human’s gait. Moreover, the energy-harvesting module also acts as a knee impact absorber for the human, where the effective damping level can be modulated in a controlled manner. The harvested energy is regulated and stored in super capacitors for powering wireless sensory devices when needed. The experimental results show an average of a 7.91% reduction in thigh muscle activity, with a maximum of 3.2 W of electric power being generated during movement downstairs. The proposed design offers important prospects for the realization of lightweight wearable exoskeletons with improved efficiency and long-term sustainability.

This paper presents a hydrodynamics study that examines the comparison and collaboration of two swimming modes relevant to the universality of dolphins. This study utilizes a three-dimensional virtual swimmer model resembling a dolphin, which comprises a body and/or caudal fin (BCF) module, as well as a medium and/or paired fin (MPF) module, each equipped with predetermined kinematics. The manipulation of the dolphin to simulate various swimming modes is achieved through the application of overlapping grids in conjunction with the parallel hole cutting technique. The findings demonstrate that the swimming velocity and thrust attained through the single BCF mode consistently surpass those achieved through the single MPF mode and collaborative mode. Interestingly, the involvement of the MPF mode does not necessarily contribute to performance enhancement. Nevertheless, it is encouraging to note that adjusting the phase difference between the two modes can partially mitigate the limitations associated with the MPF mode. To further investigate the potential advantages of dual-mode collaboration, we conducted experiments by increasing the MPF frequency while keeping the BCF frequency constant, thus introducing the concept of frequency ratio (β). In comparison to the single BCF mode, the collaborative mode with a high β exhibits superior swimming velocity and thrust. Although its efficiency experiences a slight decrease, it tends to stabilize. The corresponding flow structure indirectly verifies the favorable impact of collaboration.