11 September 2023 in Ocean Engineering
7 June 2024 in Ocean Engineering
1 April 2024 in Physics of Fluids
This study conducts a numerical investigation of the self-propelled performance of a bio-inspired squid robot equipped with four rigid tentacles, exploring three sets of collaborative modes. Leveraging the open-source platform OpenFOAM, we develop a self-propulsion module incorporating the dynamic overset grid technique to manipulate the complex motion of rigid tentacles. The driving system of a single tentacle is simplified into a two-link mechanism, where the phase difference between the links effectively emulates the oscillatory pattern of fish-like locomotion. The interaction of four tentacles gives rise to three distinct driving modes: reverse, homologous, and interlace modes. The results indicate that the homologous mode follows the hydrodynamic characteristics of fish-like waves, the interlace mode can cause the robot to deviate from the initial path, and the reverse mode outperforms the other two modes, exhibiting a higher ultimate cruising speed. Regardless of the propulsion process, the cruising performance of the robot is significantly influenced by the maximum amplitude angle θmax. An increase in θmax also contributes to an elevation in the instantaneous longitudinal force coefficient CFx, with the most pronounced impact observed in the homologous mode. The disparity among the three modes is also evident in the periodic pressure variation and flow field evolution patterns. The vortex distribution during steady-state moments systematically reveals the collaborative effects among the tentacles in different modes on the self-propulsion performance.
9 April 2024 in Ocean Engineering
1 September 1994 in Journal of Applied Physics
An alternative approach to measuring the complete anisotropic elastic constants cij(sij) of an orthorhombic‐symmetry material is proposed. This approach requires measurements along only principal directions: 〈100〉. In this approach, a pulse‐echo (megahertz‐frequency) method was used to measure c11, c22, c33, c44, c55, and c66. A resonance (kilohertz‐frequency) method was used to measure three elastic compliances: s11, s22, and s33. Combining the cii with the sii, the complete sets of cij and sij were obtained. This approach avoids the troublesome, error‐prone determination of off‐diagonal cij(sij) by the usual measurements along nonprincipal directions. The approach was applied to a boron‐aluminum composite where the off‐diagonal terms remain uncertain. In principle, the approach applies to any orthorhombic‐symmetry material.
1 February 2024 in Physics of Fluids
Three different hovering modes, namely, the caudal fin, pectoral fins, and multi fins, were utilized to achieve the standing-and-hovering behavior in robotic dolphins. A three-dimensional dolphin model, consisting of body, caudal fin, and symmetric pectoral fins, was used as the virtual swimmer to implement three hovering modes. A novel paddling motion was proposed, and a symmetric shape was designed of the pectoral fins. The hovering mechanisms of different modes were revealed, and the mapping relationships between different motion and performance parameters such as hovering height, efficiency, stability, and rapidity were established. The respective advantages of the three hovering modes were compared. The results showed that the caudal fin mode had the best hovering stability, while the pectoral fins mode had the best hovering rapidity. Moreover, it is worth noting that the multi fins mode had both the good hovering stability and rapidity. Therefore, the optimal hovering mode and motion parameters can be selected based on different expected objectives to achieve the best results. This study provides a new approach to break through the spatial barriers to movement of underwater robots and provides a solid hydrodynamic theoretical basis for the development of cross-medium robots with multiple hovering modes.