Verónica Weng

Ms. Verónica Weng

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 May 2020 in Membranes
Verified
Journal Article
Open access
PDF file
MSMaria Serra
Maria Serra
VWVerónica Weng
Verónica Weng
Isabel CoelhosoIsabel Coelhoso
Isabel Coelhoso
Vitor D. AlvesVitor D. Alves
Vitor D. Alves
Carla BrazinhaCarla Brazinha
Carla Brazinha
Corn fiber, a by-product of the starch industry, is presently incorporated in animal feed. However, it has arabinoxylans as added-value components (besides ferulic acid) that should be valorized. In this work, the raw material, a fraction enriched in arabinoxylans from corn fiber, previously produced by alkaline extraction from corn fiber and pre-concentrated by ultrafiltration, was further purified. The use of ultrafiltration operated in diafiltration mode (dia-ultrafiltration) was evaluated for the purification of the arabinoxylans fraction. The objective was to maximize the removal of the small contaminants from the fraction and to maximize the permeability and/or the permeate flux, by selecting the relevant operating conditions involved in this process. The removal of contaminants (%) was estimated when their apparent rejection stabilized. Edible films were produced, from the resultant purified arabinoxylans fraction, using glycerol as plasticizer (30% dry basis). Additionally, films with the incorporation of ferulic acid were developed, in order to obtain barriers with antioxidant activity. The films were characterized in terms of mechanical properties, antioxidant activity and permeability to water vapor. The films prepared presented a good potential to be used as packaging for food products with low water content.

28 April 2021 in Membranes
Verified
Journal Article
Open access
PDF file
VWVerónica Weng
Verónica Weng
Carla BrazinhaCarla Brazinha
Carla Brazinha
Isabel CoelhosoIsabel Coelhoso
Isabel Coelhoso
Vitor D. AlvesVitor D. Alves
Vitor D. Alves
Corn fiber from the corn starch industry is a by-product produced in large quantity that is mainly used in animal feed formulations, though it is still rich in valuable components, such as arabinoxylans, with proven film-forming ability. During arabinoxylans’ recovery under alkaline extraction, a dark-colored biopolymer fraction is obtained. In this work, a purified arabinoxylan extract from corn fiber with an intense brownish color was decolorized using hydrogen peroxide as the decolorizing agent. Biodegradable films prepared by casting the decolorized extract exhibited a light-yellow color, considered more appealing, envisaging their application in food packaging. Films were prepared with glycerol as plasticizer and citric acid as cross-linker. Although the cross-linking reaction was not effective, films presented antioxidant activity, a water vapor permeability similar to that of non-decolorized films, and other polysaccharides’ and mechanical properties that enable their application as packaging materials of low-water-content food products.

25 July 2023 in Molecules
Verified
Journal Article
Open access
PDF file
VWVerónica Weng
Verónica Weng
MCMartim Cardeira
Martim Cardeira
ASAndreia Bento da Silva
Andreia Bento da Silva
ASAna Teresa Serra
Ana Teresa Serra
Carla BrazinhaCarla Brazinha
Carla Brazinha
MBMaria Bronze
Maria Bronze
Arabinoxylan has prebiotic properties, as it is able to resist digestion in the small intestine and undergoes fermentation in the large intestine. In this work, arabinoxylan was extracted from corn fiber using an alkaline solution and further purified with membrane processing. It was found that the extracts were mainly composed of xylose (50–52%), arabinose (37–39%), galactose (9%) and glucose (1–4%), with an A/X ratio of 0.72–0.77. All the extracts were composed of phenolic compounds, including ferulic acid derivatives such as dimers, trimers and tetramers. The purified extract had a lower concentration of ferulic and p-coumaric acid (0.004 and 0.02 mg/mgdry_weight, respectively) when compared to raw extract (19.30 and 2.74 mg/mgdry_weight, respectively). The same effect was observed for the antioxidant activity, with purified extracts having a lower value (0.17 ± 0.02 µmol TEAC/mg) when compared to the raw extract (2.20 ± 0.35 µmol TEAC/mg). The purified extract showed a greater antiproliferative effect against the HT29 cell line with EC50 = 0.12 ± 0.02 mg/mL when compared to the raw extract (EC50 = 5.60 ± 1.6 mg/mL). Both raw and purified extracts did not show any cytotoxicity to the Caco-2 cell line in the maximum concentration tested (10 mg/mL).

1 August 2025 in Polymers
Verified
Journal Article
Open access
PDF file
VWVerónica Weng
Verónica Weng
DGDiana Gago
Diana Gago
Carla BrazinhaCarla Brazinha
Carla Brazinha
Vitor D. AlvesVitor D. Alves
Vitor D. Alves
Isabel CoelhosoIsabel Coelhoso
Isabel Coelhoso
Arabinoxylan is a polysaccharide with film-forming properties, present in corn fiber, and a low-value by-product. The extract has a deep brown color, producing films of the same shade, which may not be appealing. This study addresses, for the first time, the adsorption of colored compounds present in an arabinoxylan extract using resin MN102. The resin successfully adsorbed the colored compounds from the arabinoxylan extract. After four consecutive adsorption/desorption cycles, the efficiency of the resin was similar, only decreasing from 63.3% to 52.9%. Langmuir and Freundlich models were fitted to the results of adsorption isotherm experiments, with the Freundlich model demonstrating the best fit to the experimental results. A fixed-bed column loaded with the resin was used for the removal of the colored compounds from the arabinoxylan extract, and the effect of the volumetric flow rate was investigated. The Yan and log-Gompertz models showed the best fit to the experimental breakthrough curves. This study systematically evaluated the adsorption conditions, providing a comprehensive analysis of the performance of the resin in the removal of the colored compounds. Additionally, the ability of the extract to maintain its film-forming properties after decolorization was evaluated, and some of the film’s key characteristics were evaluated, namely its color, solubility in water and mechanical properties.

1 September 2026 in Recycling
Verified
Journal Article
Open access
PDF file
KBKiana Bila
Kiana Bila
LCLucas Comba
Lucas Comba
EPEdgar Perestrelo
Edgar Perestrelo
STSara Maria Dias Tomé
Sara Maria Dias Tomé
VWVerónica Weng
Verónica Weng
Victor Gomes Lauriano SouzaVictor Gomes Lauriano Souza
Victor Gomes Lauriano Souza
Fish is a food of high nutritional value, being an important source of proteins, fat, vitamins, and essential minerals. Atlantic horse mackerel is also rich in omega-3 polyunsaturated fatty acids (n3-PUFAs), recognized for their benefits to cardiovascular and neurological health. However, this composition also makes it highly susceptible to lipid oxidation, reducing its shelf life. Oxidation is accelerated by high water activity and near-neutral pH, conditions common in fish and processed products such as fish burgers. This work aimed to develop fish burgers incorporated with bioactive extracts (protein hydrolysates from cod fish processing by-product—PH, or green tea extract—GTE) and study their shelf life. The PH was recovered from cod frames using subcritical water extraction, and GTE with hydro-alcoholic extraction. The fish burgers were prepared using minced fish meat incorporated with 1% (w/w) of extracts, in four formulations: (i) 1% (w/w) of PH; (ii) 1% (w/w) of GTE; (iii) a combination of both extracts at 0.5% (w/w) each; and (iv) control without extracts. Physical–chemical, antioxidant and microbiological analysis of the burgers was performed to evaluate their preservation over 6 days of refrigerated storage. Compared to the control, samples with only GTE or the combined GTE + PH presented a delay in oxidation (50% less in TBARS) and microbiological deterioration (reduction of 0.5–1.8 Log CFU/g in total psychrotropic microorganisms). No significant changes were observed in the fish burgers incorporated with only PH. The results demonstrate that the incorporation of bioactive extracts has potential in reducing oxidative degradation and improving microbiological stability in fish-based products; however, superior doses must be used. Moreover, the use of natural extracts aligns with current consumer demand for clean-label and functional foods.

12 August 2026 in Polysaccharides
Verified
Journal Article
Open access
PDF file
VWVerónica Weng
Verónica Weng
EPEdgar Perestrelo
Edgar Perestrelo
MDMaria Paula Duarte
Maria Paula Duarte
Isabel CoelhosoIsabel Coelhoso
Isabel Coelhoso
Victor Gomes Lauriano SouzaVictor Gomes Lauriano Souza
Victor Gomes Lauriano Souza
Pedro SimoesPedro Simoes
Pedro Simoes
Fish processing by-products represent an abundant source of valuable biomolecules that can be valorized through sustainable extraction approaches. In this work, cod backbone hydrolysates obtained by subcritical water hydrolysis were incorporated into chitosan-based films for potential food packaging applications. The hydrolysis residue, rich in minerals, particularly hydroxyapatite (HAp residue), was also incorporated into the films to maximize the utilization of all hydrolysis-derived fractions. The effects of hydrolysate and HAp residue incorporation on the properties of the films were evaluated. The hydrolysate incorporation significantly improved the tensile strength of the films (from 11.56 to 24.39 MPa) and reduced water vapor permeability (from 4.93 to 2.89 (×10−11) mol.m.m−2.s−1.Pa−1), suggesting the formation of a denser and cohesive polymer network. However, the films also exhibited increased swelling and solubility (22–29% and 231–561%, respectively). When adding HAp residue, the films showed lower visible light transmittance and higher opacity, demonstrating improved light barrier properties. The addition of HAp residue also reduced swelling capacity but increased water vapor permeability and decreased tensile strength, suggesting the formation of a more heterogeneous film structure. Overall, the results demonstrate that cod backbone hydrolysates can be an alternative additive to chitosan films to tailor their functional properties for food packaging applications. The incorporation of hydroxyapatite-rich residues contributes to the full valorization of fish processing by-products, supporting the development of sustainable and biodegradable functional materials within a circular economy approach.