The stringer-stiffened structure is widely used due to its excellent mechanical properties. Improving the manufacturing quality of stringer-stiffened structure which have complex geometry is important to ensure the bearing capacity of aviation components. Herein, composite hat-stiffened composite structures were manufactured by different filling forms and bladders with various properties, the deformation of silicone rubber bladder in co-curing process was studied by using the finite element method. The thickness measurement at different positions of the hat-stiffened structure was performed to determine the best filling form and bladder property. Moreover, in view of the detection difficulties in R-zone of stringer, numerical simulation was performed to get the sound pressure and impulse response of at the R-zone of stringer by Rayleigh integration method, and an effective equipment which could stably detect the manufacturing quality of R-zone was designed to verify the correctness of sound field simulation and realize the detection of stringer. With the optimum filling form and bladder properties, hat-stiffened composites can be manufactured integrally with improved surface quality and geometric accuracy, based on co-curing process.
The purpose of this paper is to study the effects of different trajectory planning methods on the mechanical properties of components. The scope of the research includes finite element simulation calculation and experimental tests of the actual structure. The test shall be carried out in the whole load range until the failure of the structure occurs. Taking the composite conical shell as an example, a variable angle initial path generation method of the conical shell surface is proposed, and the parallel offset algorithms based on partition and the circumferential averaging are proposed to fill the surface. Then, finite element analysis is carried out for the paths that satisfy the manufacturability requirements, the analysis results show that the maximum deformation and maximum transverse as well as longitudinal stress of fiber of circumferential averaging variable angle path conical shell are reduced by 16.3%, 5.85%, and 19.76%, respectively, of that of the partition variable angle path. Finally, the strength analysis of conical shells manufactured by different trajectory design schemes is carried out through finite element analysis and actual failure tests. The finite element analysis results are in good agreement with the experimental results of the actual structure. The results show that the circumferential uniform variable angle has good quality, and it is proved that the path planning algorithm that coordinates path planning and defect suppression plays an important role in optimizing placement trajectory and improving mechanical properties of parts.
About Me
The author is mainly engaged in the research of composite automated fiber placement, especially in manufacturing defects.
The author is mainly engaged in the research of composite automated fiber placement, especially in manufacturing defects.