Jun Xiao

Dr. Jun Xiao


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 August 2016 in Journal of Reinforced Plastics and Composites
Verified
Journal Article
Closed access
CZCong Zhao
Cong Zhao
JXJun Xiao
Jun Xiao
WHWei Huang
Wei Huang
XHXinjie Huang
Xinjie Huang
SGShanqun Gu
Shanqun Gu
To conform to the fiber path, deformation of prepreg tow occurred inevitably in automated fiber placement process which would have great impact on layup quality. In order to evaluate whether fiber trajectory could be laid without prepreg distortion, fiber path layup quality was proposed and evaluated by prepreg tow deformation characteristic on free-form surface in this paper. Critical buckling radius of plane lateral bending was proposed as evaluation index for tow deformability. Layup quality of fiber trajectory was evaluated by the relationship between geodesic radius of trajectory and critical buckling radius. If the former radius was larger than the latter radius, layup quality of fiber path was fairly good, but not vice versa. A series of layup experiments were conducted to verify the evaluation criterion. Results showed that fiber trajectory layup quality could be well evaluated by this criterion proposed in this paper. And fiber modulus, prepreg thickness, and process parameters played important roles in determining fiber trajectory layup quality evaluated by prepreg deformability. By adjusting layup process parameters during automatic layup process, deformation ability of prepreg tow can be improved and the layup quality of fiber path could be enhanced to a higher level.

27 March 2024 in Coatings
Verified
Journal Article
Open access
PDF file
PLPeng Luo
Peng Luo
WFWanxi Feng
Wanxi Feng
GZGang Zu
Gang Zu
LLLinyin Luo
Linyin Luo
JXJun Xiao
Jun Xiao
This study delves into the impact toughness of medium-thick (12 mm thick) titanium alloy joints crafted through a multi-layer, multi-pass welding technique that blends laser-arc (MIG) hybrid welding technology. Microstructural scrutiny, employing optical microscopy, SEM and TEM, unveils a consistent composition across weld passes, with prevailing α/α′ phases interspersed with some β phase, resulting in basket-weave structures primarily dominated by acicular α′ martensite. However, upper regions exhibit Widmanstatten microstructures, potentially undermining joint toughness. Hardness testing indicates higher values in cosmetic layers (~420 HV) compared to backing layers and bending tests manifest superior toughness in lower joint regions, attributed to smaller grain sizes induced by repetitive welding thermal cycles. Impact toughness assessment unveils diminished values in the weld metal (WM) compared to the heat-affected zone (HAZ) and base material (BM), amounting to 91.3% of the base metal’s absorption energy. This decrement is ascribed to heightened porosity in upper regions and variations in grain size and phase composition due to multi-layer, multi-pass welding. Microstructural analysis proximal to failure sites suggests one mechanism wherein crack propagation is impeded by the β phase at acute crack angles. In essence, this study not only underscores the practicality of laser-MIG hybrid welding for medium-thick TC4 alloy plates but also underscores the reliability of joint mechanical properties.

10 June 2021 in Polymer Composites
Verified
Journal Article
Closed access
PDF file
MLMengying Li
Mengying Li
JXJun Xiao
Jun Xiao
XWXingbang Wang
Xingbang Wang
XYXiao Yang
Xiao Yang
XCXiaodong Chen
Xiaodong Chen

6 July 2016 in Journal of Applied Polymer Science
Verified
Journal Article
Closed access
PDF file
TLTing Liu
Ting Liu
JLJinhuan Li
Jinhuan Li
JXJun Xiao
Jun Xiao
WTWenping Tian
Wenping Tian

15 October 2021 in Materials
Verified
Journal Article
Open access
PDF file
DWDongli Wang
Dongli Wang
JXJun Xiao
Jun Xiao
XJXiangwen Ju
Xiangwen Ju
MDMingyue Dou
Mingyue Dou
LLLiang Li
Liang Li
XWXianfeng Wang
Xianfeng Wang
The purpose of this paper is to study the effects of different trajectory planning methods on the mechanical properties of components. The scope of the research includes finite element simulation calculation and experimental tests of the actual structure. The test shall be carried out in the whole load range until the failure of the structure occurs. Taking the composite conical shell as an example, a variable angle initial path generation method of the conical shell surface is proposed, and the parallel offset algorithms based on partition and the circumferential averaging are proposed to fill the surface. Then, finite element analysis is carried out for the paths that satisfy the manufacturability requirements, the analysis results show that the maximum deformation and maximum transverse as well as longitudinal stress of fiber of circumferential averaging variable angle path conical shell are reduced by 16.3%, 5.85%, and 19.76%, respectively, of that of the partition variable angle path. Finally, the strength analysis of conical shells manufactured by different trajectory design schemes is carried out through finite element analysis and actual failure tests. The finite element analysis results are in good agreement with the experimental results of the actual structure. The results show that the circumferential uniform variable angle has good quality, and it is proved that the path planning algorithm that coordinates path planning and defect suppression plays an important role in optimizing placement trajectory and improving mechanical properties of parts.

19 May 2024 in Materials
Verified
Journal Article
Open access
PDF file
JSJiaqi Shi
Jiaqi Shi
WWWang Wang
Wang Wang
YWYuequan Wang
Yuequan Wang
JQJunwei Qi
Junwei Qi
JXJun Xiao
Jun Xiao
The tack of prepreg is a key factor affecting the automatic tape laying process. During the manufacturing process of large composite parts, prepreg material may be stored at room temperature for several days, resulting in a decrease in its tack. In this study, a new tack test tool was designed, and the decay rate of prepreg tack at different temperatures was tested. We proposed a prepreg tack decay model, which assumes that the main factor in tack decay is the reduction in resin chain activity during storage. The maximum deviation between the model calculation results and the experimental results of the tack decay rate is 9.7%. This study also proposed a new statistical unit for prepreg tack, which can establish the relationship between the tack of prepreg and its remaining storage time and reduce prepreg management costs.