The biodegradability of bioplastics in natural environments remains a highly debated topic within the scientific community. It is assessed primarily using the compostability standard EN 13432, although this, however, does not accurately reflect degradation processes occurring in aquatic environments. To verify the biodegradability of polylactic acid (PLA) in freshwater, two tests, differing only in the inoculum sampling location, were conducted according to EN ISO 14851:2019, measuring oxygen demand. However, to gain a comprehensive understanding, bioplastics biodegradation should be thoroughly investigated at multiple levels beyond oxygen consumption. Additional analyses, including morphological and thermal characterization of polymers and assessment of inoculum characteristics, are fundamental in providing valuable insights into degradation mechanisms. Biodegradability tests revealed low biodegradation rates (44.04 % and 23.38 %), with no evident weight change in PLA pellets during testing. Analytical techniques (FT-IR, DSC, SEM) indicated negligible visual or structural modifications between virgin and tested pellets. Therefore, under conditions specified by the standard PLA pellets did not undergo significant biodegradation in freshwater. Discrepancies between tests α and β suggested variability due to inoculum quality. A series of challenges persist when implementing this standard, including the lack of a threshold for use in clearly classifying a bioplastic as "biodegradable" and flexibility in selecting process parameters (e.g., test material shape and size, duration, temperature, inoculum percentage). Accordingly, to facilitate a reliable assessment of the biodegradability of bioplastics in freshwater, the EN ISO 14851:2019 standard should be amended and updated.
The uptake and translocation of four polybrominated diphenyl ethers (PBDEs) and four novel brominated flame retardants (NBFRs) in tomato plants (Solanum lycopersicum L.) were investigated via the RHIZOtest, a standard soil-based biotest, optimized for organic compounds. Tomato plants were exposed to soil samples spiked with 0 (i.e. control), 5.00 or 50.00 ng g-1dw of each compound. Compared of those of the control, exposure to increasing spiking concentrations resulted in average reductions of 13% and 26% (w/w) in tomato plant biomass. Higher concentrations of NBFRs were analyzed both in roots, ranging from 0.23 to 8.01 ng g-1dw for PBDEs and from 1.25 to 18.51 ng g-1dw for NBFRs, and in shoots, ranging from 0.09 to 5.58 ng g-1dw and from 0.47 to 7.78 ng g-1dw for PBDEs and NBFRs, respectively. This corresponded to an average soil uptake of 5% for PBDEs and 9% for NBFRs at the lower soil-spiking level, and 3% for PBDEs and 6% for NBFRs at the higher soil spiking level. Consequently, among both initial spiking levels, the soil-root concentration factor (RCF) values were lower on average for PBDEs (0.13 ± 0.05 g dw soil g-1dw roots) than for NBFRs (0.33 ± 0.16 g dw soil g-1dw roots). Conversely, nondifferent values of the root-shoot transfer factor (TF) were calculated for both PBDEs (0.54 ± 0.13 g dw roots g-1dw shoots) and NBFRs (0.49 ± 0.24 g dw roots g-1dw shoots). The differences and similarities reported in the RCF and TF between and within the two groups of compounds can be explained by their properties. The calculated RCF and TF values of the PBDEs exhibited a decreasing trend as the number of bromine atoms increased. Additionally, a robust negative linear correlation was observed between RCF values and the respective logKow values for the PBDEs, at both soil-spiking levels. The root uptake of NBFRs exhibited a negative correlation with their hydrophobicity; however, this was not observed in the context of root-to-shoot transfer. The presence of a second aromatic ring appears to be the key factor influencing the observed variations in NBFRs, with biphenyl NBFRs (BTBPE and DBDPE) characterized by lower uptake and reduced translocation potential than monophenyl PBEB and HBB. Understanding the transfer of these compounds to crops, especially near plastic recycling waste sites, is crucial for understanding the risks of their potential inclusion in the human food chain.
Analysis of atmospheric particulate matter (PM) has been proposed for the environmental surveillance of SARS-CoV-2. The aim of this study was to increase the current knowledge about the occurrence of SARS-CoV-2 in atmospheric PM, introduce a dedicated sampling method, and perform a simultaneous assessment of human seasonal coronavirus 229E. Thirty-two PM samples were collected on quartz fiber filters and six on Teflon using a low- and high-volumetric rate sampler, respectively, adopting a novel procedure for optimized virus detection. Sampling was performed at different sites in the Venice area (Italy) between 21 February and 8 March 2020 (n = 16) and between 27 October and 25 November 2020 (n = 22). A total of 14 samples were positive for Coronavirus 229E, 11 of which were collected in October–November 2020 (11/22; positivity rate 50%) and 3 in February–March 2020 (3/16 samples, 19%). A total of 24 samples (63%) were positive for SARS-CoV-2. Most of the positive filters were collected in October–November 2020 (19/22; positivity rate, 86%), whereas the remaining five were collected in February–March 2020 at two distinct sites (5/16, 31%). These findings suggest that outdoor PM analysis could be a promising tool for environmental surveillance. The results report a low concentration of SARS-CoV-2 in outdoor air, supporting a scarce contribution to the spread of infection.
Lettuce, a widely consumed raw vegetable, harbors leaf-associated microbial communities whose understanding and prediction are crucial for plant and human health. While environmental factors are known to strongly influence plant leaf microbiomes, the role of plant-specific determinants in shaping microbial diversity remains unclear. In this study, we investigated how three key plant factors -genetic distance, plant variety and leaf micro- and macronutrient content- influence the composition and diversity of lettuce leaf bacterial communities, by analyzing 131 fully-sequenced Lactuca sativa genotypes via 16S rRNA amplicon sequencing. Our findings revealed that variety, as defined by breeders, exerts a greater influence on bacterial community diversity than genetic distance or variations in leaf nutrient levels. Together with available and detailed shoot traits they explained 13.4% of the observed bacterial diversity. Inspection of 9 specific leaf morphological traits, with further validation by MAGs analysis, showed that heart formation, head height, and venation types significantly shaped bacterial richness and evenness, mainly acting on non-hub members. These results highlight the strong relationship between leaf morphology and bacterial community structure, suggesting that phenotypic traits play an outsized but understudied role in shaping the leaf microbiota, a crucial aspect of the edible microbiome.