Large-scale sudden-onset disasters may cause massive injuries and thus place great pressure on the emergency blood supplies of local blood banks. When blood is in short supply, blood products gathered urgently to a local blood center should be appropriately allocated to blood banks in the affected area. Moreover, ABO/Rh(D) compatibilities among blood groups must be considered during emergency situations. To minimize the total unmet demand of blood products considering the optimal ABO/Rh(D)-compatible blood substitution scheme, a mixed integer programming model is developed and solved efficiently by using a greedy heuristic algorithm. Finally, a numerical example derived from the emergency blood supply scenario of the Wenchuan Earthquake is presented to verify the proposed model and algorithm. The results show that considering ABO/Rh(D)-compatible blood substitution can remarkably increase the efficiency of emergency blood allocation while lowering blood shortage, and the preference order of possible ABO/Rh(D)-compatible substitutions has an influence on the allocation solution.
Reliable decision‐making in a safety‐critical system depends on the consistency of the state of the system process. Based on the decision‐makeing properties of safety‐critical systems, the definition of the critical component, Boolean evolution system, and cognate variables are presented here. By exploring the two lemmas of the critical components, the consistency of the safety‐critical system is defined, then a new process of a safety‐critical decision of consistency checking is proposed. In order to check the consistency properties of the decision, two computation tree logic formulas derived from the lemmas of the consistency checking are developed. The case of the train routing selection is modelled and verified by model checking, which shows the decision prototype guarantees the safety of the critical process. As the turnout is the critical component in the process of the train routing selection, a multi‐sensor‐based unit of state monitoring is developed, and a real‐world test shows the accuracy of the monitoring unit. This study confirms that the state consistency verification ensures the reliability of the safety‐critical system's decision output. The case can enlighten the development of the intelligent control system which has a critical component of decision‐making.
This study explores methodologies for removing heavy metal elements such as nickel (Ni), copper (Cu), cadmium (Cd), and lead (Pb) from diverse aquatic environments, including rivers, lakes, and oceans. Nanosized montmorillonite (MON) was used as the raw material and was subjected to organic chemical modification through silanization using cetyltrimethylammonium bromide and grafting of amino groups to produce amino-functionalized nanomontmorillonite composite (NH2-MON). The removal effectiveness of NH2-MON on heavy metal elements in water bodies was evaluated. Experiments involving adsorption were conducted to evaluate the impact of nanomaterial concentration and solution pH on the entrapment of heavy metal ions. The results indicated that an increased nanomaterial adsorbent dosage precipitated water coagulation, which subsequently altered the accessibility of adsorption sites for heavy metal ions, thereby significantly affecting the heavy metal removal effectiveness of the nanomaterial. The ideal nanomaterial dosage was determined to be 2.5 g/L, yielding the maximum unit adsorption capacity and removal rate. The acidity or alkalinity of the solution was instrumental in the adsorption of heavy metal ions such as Ni, Cu, Cd, and Pb using nanomaterials, establishing solution pH as a pivotal determinant in the adsorption process. As the solution pH increased, the electronegativity of the nanomaterial increased, thus encouraging its interaction with positively charged heavy metal ions, including Ni, Cu, Cd, and Pb. The ideal solution pH range was found to be 4–5.