The cement industry has brought serious environmental pollution problems. In the background of ecological civilization, accelerating rational use of waste resources plays an important role in protecting the environment. In this study, self-compacting concrete (SCC) is prepared using fly ash and lime powder as supplementary cementitious materials by replacing 50%, 60%, and 70% of ordinary Portland cement. By systematically analyzing the influence of the fly ash replacement rate on the workability and mechanical properties of SCC, steel-fiber-reinforced SCC containing 60% fly ash is chosen for further study, and steel fiber is added at the percentages of 0.25%, 0.50%, 0.75%, and 1.00%. The performances in fresh and hardened states are investigated in terms of workability, compressive strength, splitting tensile strength, flexural strength, and axial compression deformation property. The obtained outcomes indicate that although the incorporation of fly ash can improve the workability of the mixture, there is a negative correlation between the mechanical properties of SCC and the fly ash replacement rate. For steel-fiber-reinforced SCC containing 60% fly ash, when the content of steel fibers exceeds 0.75%, the workability decreases sharply, and even when the volume fraction is 1.00%, the passing ability cannot meet the requirements of the technical specifications for applications of self-compacting concrete. The analysis results for mechanical properties show that compressive strength is not changed significantly with increasing percentage of steel fibers. The steel fibers strengthen splitting tensile strength and flexural strength significantly, and compared with that of without steel fibers, they increased by 22% and 58%, respectively, with steel fibers up to 1.00%. Additionally, the parameters of the axial compression deformation property are improved by introducing steel fibers, especially the strain energy ($V_{\epsilon }$) and relative toughness ($\Gamma$) of steel-fiber-reinforced SCC containing a high level of fly ash.

In recent decades, loess landslide events have attracted increasing attention in the South Jingyang tableland. To elucidate the mechanical mechanism of landslide initiation in the region, this work collected undisturbed loess and paleosol samples taking from the Q₂ strata in the South Jingyang tableland. A range of direct shear tests were carried out to explore the strength evolution law of shear zone soil subjected to a varying initial moisture content. In addition, soil water characteristic curves (SWCCs) were also charted and used for predicting the unsaturated shear strength. The findings show that the basic physical properties of the paleosol are different from those of loess due to their different pedogenic environments. The normal stress level and initial moisture content jointly determine whether the shear behavior is strain hardening or strain softening. The shear strength and strength parameters evidently diminish with an increasing initial moisture content, and cohesion contributes to the vast majority of strength attenuation. Paleosol samples possess higher values in shear strength and strength parameters than loess samples due to their stronger inter-particle cementation. The predictive formulas of unsaturated shear strength for undisturbed loess and paleosol are proposed, respectively, based on the Vanapalli model, and the calculated values of the strength prediction model are in perfect agreement with the experimental values.