Ozone treatment is an eco-friendly and cost-effective approach to achieve material disinfection, and this disinfection method is of utmost importance in the present global pandemic. The efficacy of ozone's oxidative potential on common microorganisms has been extensively studied, particularly in the food and water treatment industries. However, little is still understood regarding its antimicrobial capabilities for the treatment of textile substrates in air. In this study, fabric swatches inoculated with bacterial and fungal suspensions are exposed to ozone for different durations and at different ozone concentrations. Pathogenic bacteria (Escherichia coli, Staphylococcus aureus), and fungi (Aspergillus fumigatus, and Candida albicans), are the microbes utilised in this study. The efficacy of ozone is demonstrated by the complete removal of microbiota on the tested swatches when a concentration and exposure duration of 20 ppm and 4 mins are respectively maintained in a test ozone chamber. We expect the insights from this work to guide the development of new ozonation techniques capable of rapid sterilisation in industrial & public settings.

SARS-CoV-2 (severe acute respiratory syndrome coronavirus-2) is a novel coronavirus strain that emerged at the end of 2019, causing millions of deaths so far. Despite enormous efforts being made through various drug discovery campaigns, there is still a desperate need for treatments with high efficacy and selectivity. Recently, marine sulfated polysaccharides (MSPs) have earned significant attention and are widely examined against many viral infections. This article attempted to produce a comprehensive report about MSPs from different marine sources alongside their antiviral effects against various viral species covering the last 25 years of research articles. Additionally, these reported MSPs were subjected to molecular docking and dynamic simulation experiments to ascertain potential interactions with both the receptor-binding domain (RBD) of SARS CoV-2’s spike protein (S-protein) and human angiotensin-converting enzyme-2 (ACE2). The possible binding sites on both S-protein’s RBD and ACE2 were determined based on how they bind to heparin, which has been reported to exhibit significant antiviral activity against SARS CoV-2 through binding to RBD, preventing the virus from affecting ACE2. Moreover, our modeling results illustrate that heparin can also bind to and block ACE2, acting as a competitor and protective agent against SARS CoV-2 infection. Nine of the investigated MSPs candidates exhibited promising results, taking into consideration the newly emerged SARS CoV-2 variants, of which five were not previously reported to exert antiviral activity against SARS CoV-2, including sulfated galactofucan (1), sulfated polymannuroguluronate (SPMG) (2), sulfated mannan (3), sulfated heterorhamnan (8), and chondroitin sulfate E (CS-E) (9). These results shed light on the importance of sulfated polysaccharides as potential SARS-CoV-2 inhibitors.

The control of infectious diseases can be improved via carefully designed decontamination equipment and systems. Research interest in ozone (a powerful antimicrobial agent) has significantly increased over the past decade. The COVID-19 pandemic has also instigated the development of new ozone-based technologies for the decontamination of personal protective equipment, surfaces, materials, and indoor environments. As this interest continues to grow, it is necessary to consider key factors affecting the applicability of lab-based findings to large-scale systems utilizing ozone. In this review, we present recent developments on the critical factors affecting the successful deployments of industrial ozone technologies. Some of these include the medium of application (air or water), material compatibility, efficient circulation and extraction, measurement and control, automation, scalability, and process economics. We also provide a comparative assessment of ozone relative to other decontamination methods/sterilization technologies and further substantiate the necessity for increased developments in gaseous and aqueous ozonation. Modeling methodologies, which can be applied for the design and implementation of ozone contacting systems, are also presented in this review. Key knowledge gaps and open research problems/opportunities are extensively covered including our recommendations for the development of novel solutions with industrial importance.

For decades, ozone has been known to have antimicrobial properties when dissolved or generated in water and when utilized in its gaseous form on different substrates. This property (the ability to be used in air and water) makes it versatile and applicable to different industries. Although the medium of ozonation depends on the specific process requirements, some industries have the inherent flexibility of medium selection. Thus, it is important to evaluate the antimicrobial efficacy in both media at similar concentrations, an endeavor hardly reported in the literature. This study provides insights into ozone's efficacy in air and water using two Gram-negative bacteria (Escherichia coli NTCC1290 and Pseudomonas aeruginosa NCTC10332), two Gram-positive bacteria (Staphylococcus aureus ATCC25923 and Streptococcus mutans), and two fungi (Candida albicans and Aspergillus fumigatus). For gaseous ozonation, we utilized a custom-made ozone chamber (equipped with ultraviolet lamps), whereas an electrolysis oxygen radical generator was applied for ozone generation in water. During gaseous ozonation, the contaminated substrates (fabric swatches inoculated with bacterial and fungal suspensions) were suspended in the chamber, whereas the swatches were immersed in ozonated water for aqueous ozone treatment. The stability of ozone nanobubbles and their resulting impact on the aqueous disinfection efficiency were studied via dynamic light scattering measurements. It was observed that ozone is more effective in air than in water on all tested organisms except Staphylococcus aureus. The presented findings allow for the adjustment of the treatment conditions (exposure time and concentration) for optimal decontamination, particularly when a certain medium is preferred for ozonation.

With the advent of the COVID-19 pandemic, there has been a global incentive for applying environmentally sustainable and rapid sterilization methods, such as ultraviolet-C radiation (UVC) and ozonation. Material sterilization is a requirement for a variety of industries, including food, water treatment, clothing, healthcare, medical equipment, and pharmaceuticals. It becomes inevitable when devices and items like protective equipment are to be reused on/by different persons. This study presents novel findings on the performance of these sterilization methods using four microorganisms (Escherichia coli , Staphylococcus aureus , Candida albicans , and Aspergillus fumigatus) and six material substrates (stainless steel, polymethyl methacrylate, copper, surgical facemask, denim, and a cotton-polyester fabric). The combination of both ozone and UVC generally yields improved performance compared to their respective applications for the range of materials and microorganisms considered. Furthermore, the effectiveness of both UVC and ozone was higher when the fungi utilized were smeared onto the nonabsorbent materials than when 10 μL droplets were placed on the material surfaces. This dependence on the contaminating liquid surface area was not exhibited by the bacteria. This study highlights the necessity of adequate UVC and ozone dosage control as well as their synergistic and multifunctional attributes when sterilizing different materials contaminated with a wide range of microorganisms.

In current times of increasing global decontamination concerns, sustainable and environmentally-friendly technologies that possess rapid and effective disinfection capabilities are necessary for public health and safety. In this study, we evaluate the potential of ozone-based technology to reveal its immense potential in disinfection applications. Ozonated water generated by an electrolytic method was utilised to quantify ozone retention as a function of mineralogical composition for microbial decontamination. The impacts of temperature and detergent concentration on ozone concentration are critically analysed, as well as ozone’s decomposition and stain removal characteristics. In addition, fabric swatches inoculated with known concentrations of environmental microbes (Escherichia coli, Staphylococcus aureus, Candida albicans, and Aspergillus fumigatus) are washed with ozonated water to ascertain the impact of wash duration on bacterial removal efficiency. The results show significant improvement in the stability and retention potential of ozone in mineral water at low temperature and in the presence of a detergent. The experiments demonstrate first-order decomposition kinetics of ozone in aqueous formulations. The disinfection potency of ozone is also substantiated by a significant removal of microbiota on the fabric utilised (up to 7 log reduction for the bacteria analysed), thus making it effective for sterilisation applications. This also reduces the need for toxic chemicals or chemicals with toxic by-products (e.g., chlorine) for large-scale decontamination operations in various industries.