Hongbo Mu

Prof. Dr. Hongbo Mu


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Verified
Journal Article
Open access
PDF file
YWYuDong Wang
YuDong Wang
SGShangjie Ge-Zhang
Shangjie Ge-Zhang
PMPingXuan Mu
PingXuan Mu
XWXueqing Wang
Xueqing Wang
SLShaoyi Li
Shaoyi Li
HMHongbo Mu
Hongbo Mu
As the focus of architecture, furniture, and other fields, wood has attracted extensive attention for its many advantages, such as environmental friendliness and excellent mechanical properties. Inspired by the wetting model of natural lotus leaves, researchers prepared superhydrophobic coatings with strong mechanical properties and good durability on the modified wood surface. The prepared superhydrophobic coating has achieved functions such as oil-water separation and self-cleaning. At present, some methods such as the sol-gel method, the etching method, graft copolymerization, and the layer-by-layer self-assembly method can be used to prepare superhydrophobic surfaces, which are widely used in biology, the textile industry, national defense, the military industry, and many other fields. However, most methods for preparing superhydrophobic coatings on wood surfaces are limited by reaction conditions and process control, with low coating preparation efficiency and insufficiently fine nanostructures. The sol-gel process is suitable for large-scale industrial production due to its simple preparation method, easy process control, and low cost. In this paper, the research progress on wood superhydrophobic coatings is summarized. Taking the sol-gel method with silicide as an example, the preparation methods of superhydrophobic coatings on wood surfaces under different acid-base catalysis processes are discussed in detail. The latest progress in the preparation of superhydrophobic coatings by the sol-gel method at home and abroad is reviewed, and the future development of superhydrophobic surfaces is prospected.

5 August 2022 in Frontiers in Bioengineering and Biotechnology
Verified
Journal Article
Open access
SGShangjie Ge-Zhang
Shangjie Ge-Zhang
HYHong Yang
Hong Yang
HNHaiming Ni
Haiming Ni
HMHongbo Mu
Hongbo Mu
MZMingming Zhang
Mingming Zhang
As an emerging fringe science, bionics integrates the understanding of nature, imitation of nature, and surpassing nature in one aspect, and it organically combines the synergistic complementarity of function and structure–function integrated materials which is of great scientific interest. By imitating the microstructure of a natural biological surface, the bionic superhydrophobic surface prepared by human beings has the properties of self-cleaning, anti-icing, water collection, anti-corrosion and oil–water separation, and the preparation research methods are increasing. The preparation methods of superhydrophobic surface include vapor deposition, etching modification, sol–gel, template, electrostatic spinning, and electrostatic spraying, which can be applied to fields such as medical care, military industry, ship industry, and textile. The etching modification method can directly modify the substrate, so there is no need to worry about the adhesion between the coating and the substrate. The most obvious advantage of this method is that the obtained superhydrophobic surface is integrated with the substrate and has good stability and corrosion resistance. In this article, the different preparation methods of bionic superhydrophobic materials were summarized, especially the etching modification methods, we discussed the detailed classification, advantages, and disadvantages of these methods, and the future development direction of the field was prospected.

10 August 2023 in IEEE Access
Verified
Journal Article
Open access
JXJipan Xu
Jipan Xu
HYHong Yang
Hong Yang
ZWZihao Wan
Zihao Wan
HMHongbo Mu
Hongbo Mu
DQDawei Qi
Dawei Qi
SHShuxia Han
Shuxia Han
The detection of defects in wood is valuable for promoting the efficient exploitation of wood. So it is significant to further increase the accuracy of the detection of wood defects and enhance the real-time detection. In this paper, the YOLOv5 convolutional neural network is applied to wood defects detection, and the model is modified for both the YOLOv5n and YOLOv5m scales. The SimAM attention model was first incorporated into the network, and the learning rate decay strategy was replaced with CosLR, with Ghost convolution employed to minimize the model parameters. Finally, the modified network was tested for five types of wood defects, including live-knot, resin, dead-knot, knot-with-crack, and crack. It is demonstrated that the improvements resulted in a 1.5% increase in mAP 0.5:0.95 for YOLOv5n-C3Ghost and a 1.6% increase in mAP 0.5:0.95 for YOLOv5m-C3Ghost. In addition, there is a 51% and 63% difference in the number of model parameters, and a decrease in inference time and floating point operations respectively. The experiments indicate that our improved method not only enhances the accuracy of YOLOv5 in detecting wood defects, but also enables a reduction in the volume and computational cost of the model parameters.

30 April 2021 in Forests
Verified
Journal Article
Open access
PDF file
HYHong Yang
Hong Yang
Mingyu GaoMingyu Gao
Mingyu Gao
JWJinxin Wang
Jinxin Wang
HMHongbo Mu
Hongbo Mu
DQDawei Qi
Dawei Qi
In the absence of high-quality hardwood timber resources, we have gradually turned our attention from natural forests to planted fast-growing forests. However, fast-growing tree timber in general has defects such as low wood density, loose texture, and poor mechanical properties. Therefore, improving the performance of wood through efficient and rapid technological processes and increasing the utilization of inferior wood is a good way to extend the use of wood. Densification of wood increases the strength of low-density wood and extends the range of applications for wood and wood-derived products. In this paper, the effects of ultrasonic and vacuum pretreatment on the properties of high-performance wood were explored by combining sonication, vacuum impregnation, chemical softening, and thermomechanical treatments to densify the wood; then, the changes in the chemical composition, microstructure, and mechanical properties of poplar wood before and after treatment were analyzed comparatively by FT-IR, XRD, SEM, and mechanical tests. The results showed that with ultrasonic pretreatment and vacuum impregnation, the compression ratio of high-performance wood reached its highest level and the MOR and MOE reached their maximums. With the help of this method, fast-growing softwoods can be easily prepared into dense wood materials, and it is hoped that this new material can be applied in the fields of construction, aviation, and automobile manufacturing.

4 October 2021 in ACS Omega
Verified
Journal Article
Open access
HYHong Yang
Hong Yang
JWJinxin Wang
Jinxin Wang
PZPengwei Zhao
Pengwei Zhao
HMHongbo Mu
Hongbo Mu
DQDawei Qi
Dawei Qi
In the modern forestry, the demand for renewable and environmentally friendly wood protection is increasing. This paper reports a green method for preparing stable and self-cleaning superhydrophobic coating for wood protection by dripping polyvinyl alcohol cross-linked hollow silica nanoparticles on the surface of wood in combination with polydimethylsiloxane modification. The coating is based on a laminated structure with layers stacked on the surface of the wood and cured quickly with the assistance of UV. The coatings obtained on wood substrates with appropriate ratios have excellent superhydrophobic properties, with an optimum water contact angle of up to 160.4 ± 0.2°. The coating also exhibits good transparency in the UV–visible spectrum and a maximum transmittance of 91%. With transmission electron microscopy, the microscopic morphology of the self-assembled hollow silica nanoparticles was observed. Scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray diffraction were also applied to investigate the morphology and chemical composition of the coatings. A water contact angle of 151.5 ± 0.7° was maintained even after the abrasion tests with sandpaper at a distance of 300 cm. Meanwhile, the resultant coatings exhibit good self-cleaning properties apart from mechanical durability and chemical stability, which enables effective resistance to contamination. Evidenced by the abovementioned data, this composite coating is capable of optimizing the surface wettability of wood, offering a new dimension to the extensive and prolonged application of wood and wood-based products. Furthermore, considering the advantages of this method, it could also be used in other areas in the future, such as glass, solar substrates, and optical devices.

6 December 2023 in Journal of Forestry Research
Verified
Journal Article
Open access
PDF file
ZWZihao Wan
Zihao Wan
HYHong Yang
Hong Yang
JXJipan Xu
Jipan Xu
HMHongbo Mu
Hongbo Mu
DQDawei Qi
Dawei Qi
Effective development and utilization of wood resources is critical. Wood modification research has become an integral dimension of wood science research, however, the similarities between modified wood and original wood render it challenging for accurate identification and classification using conventional image classification techniques. So, the development of efficient and accurate wood classification techniques is inevitable. This paper presents a one-dimensional, convolutional neural network (i.e., BACNN) that combines near-infrared spectroscopy and deep learning techniques to classify poplar, tung, and balsa woods, and PVA, nano-silica-sol and PVA-nano silica sol modified woods of poplar. The results show that BACNN achieves an accuracy of 99.3% on the test set, higher than the 52.9% of the BP neural network and 98.7% of Support Vector Machine compared with traditional machine learning methods and deep learning based methods; it is also higher than the 97.6% of LeNet, 98.7% of AlexNet and 99.1% of VGGNet-11. Therefore, the classification method proposed offers potential applications in wood classification, especially with homogeneous modified wood, and it also provides a basis for subsequent wood properties studies.