This paper provides a synthetic and comprehensive overview on environmentally friendly anticorrosive polymeric coatings. Firstly, the economic and environmental impact of corrosion is presented to highlight the need of anticorrosive polymeric coatings as a flexible and effective solution to protect a metal. Secondly, the implementation of regulations together with the consumer awareness for environmental considerations and protection of health are the driving force for a progressive but significant change in the sector. Therefore, within the protective organic coatings market, this article provides a review of the most recent developments in environmentally friendly solutions, including bio-based and water-borne epoxy, hyperbranched polyester for low- volatile organic compounds (VOC) coatings, waterborne polyurethane and non-isocyanate polyurethanes (NIPUs), and graphene or bio-based fillers for acrylics. Moreover, this paper outlines new trends such as smart additives, bio-based corrosion inhibitors, and functional antibiocorrosive coatings as superhydrophobics. Finally, industrially relevant applications of environmentally friendly anticorrosive polymeric coatings including solutions for marine and off-shore industries are summarized.

Natural antifoulants have received significant interest in the search for non- or less-toxic antifouling coating systems for marine structures. Capsaicin, a natural compound that can be found in chili peppers, is known as an environmentally friendly antifouling agent with an excellent performance and a low environmental impact. However, controlling its release from the coating matrix is still an issue to be solved. With the aim of developing an eco-friendly antifouling system with prolonged long-term activity, in this study, we incorporated capsaicin in combination with dichlofluanid into water-based acrylic coating formulations. The antifouling activity of the resulting coatings was studied by examining the survival behavior of a Gram-negative marine bacterium Aeromonas Salmonoid ATCC 33658, and the release rate of capsaicin from the paint matrix was also assessed. The combination of 0.75 wt.% capsaicin and 0.75 wt.% dichlofluanid into the same matrix showed an antibacterial performance of up to 99.9% cfu reduction with an antibacterial value R 2.5–3 times higher than those obtained with the single biocides at 1.5 wt.%. The association between the two organic biocides created a synergistic effect on the antifouling performance, further resulting in a prolonged activity.

The need for more sustainable printed electronics has emerged in the past years. Due to this, the use of nanocellulose (NC) extracted from cellulose has recently been demonstrated to provide interesting materials such as functional inks and transparent flexible films due to its properties. Its high specific surface area together with the high content of reactive hydroxyl groups provide a highly tailorable surface chemistry with applications in ink formulations as a stabilizing, capping, binding and templating agent. Moreover, NC mechanical, physical and thermal properties (high strength, low porosity and high thermal stability, respectively) provide an excellent alternative for the currently used plastic films. In this work, we present a process for the production of water-based conductive inks that uses NC both as a template for silver nanoparticles (Ag NPs) formation and as an ink additive for ink formulation. The new inks present an electrical conductivity up to 2 × 10⁶ S/m, which is in the range of current commercially available conductive inks. Finally, the new Ag NP/NC-based conductive inks have been tested to fabricate NFC antennas by screen-printing onto NC-coated paper, demonstrating to be operative.