Junghee Joo

Ms. Junghee Joo

Department of Global Smart City, Sungkyunkwan University, Suwon, Gyeonggi, Republic of Korea
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 April 2021 in Polymers
Verified
Journal Article
Open access
PDF file
NLNahyeon Lee
Nahyeon Lee
JJJunghee Joo
Junghee Joo
Kun-Yi (Andrew) LinKun-Yi (Andrew) Lin
Kun-Yi (Andrew) Lin
Jechan LeeJechan Lee
Jechan Lee
Herein, the pyrolysis of low-density polyethylene (LDPE) scrap in the presence of a H-ZSM-11 zeolite was conducted as an effort to valorize plastic waste to fuel-range chemicals. The LDPE-derived pyrolytic gas was composed of low-molecular-weight aliphatic hydrocarbons (e.g., methane, ethane, propane, ethylene, and propylene) and hydrogen. An increase in pyrolysis temperature led to increasing the gaseous hydrocarbon yields for the pyrolysis of LDPE. Using the H-ZSM-11 catalyst in the pyrolysis of LDPE greatly enhanced the content of propylene in the pyrolytic gas because of promoted dehydrogenation of propane formed during the pyrolysis. Apart from the light aliphatic hydrocarbons, jet fuel-, diesel-, and motor oil-range hydrocarbons were found in the pyrolytic liquid for the non-catalytic and catalytic pyrolysis. The change in pyrolysis temperature for the catalytic pyrolysis affected the hydrocarbon compositions of the pyrolytic liquid more materially than for the non-catalytic pyrolysis. This study experimentally showed that H-ZSM-11 can be effective at producing fuel-range hydrocarbons from LDPE waste through pyrolysis. The results would contribute to the development of waste valorization process via plastic upcycling.

1 October 2021 in Environmental Pollution
Verified
Journal Article
Closed access
JJJunghee Joo
Junghee Joo
EKEilhann E. Kwon
Eilhann E. Kwon
Jechan LeeJechan Lee
Jechan Lee

28 June 2023 in Chemical Engineering Journal
Verified
Journal Article
Closed access
HYHeejin Yang
Heejin Yang
JJJunghee Joo
Junghee Joo
EHEunmi Hong
Eunmi Hong
SPSeong-Jik Park
Seong-Jik Park
Jechan LeeJechan Lee
Jechan Lee
Chang-Gu LeeChang-Gu Lee
Chang-Gu Lee

9 May 2023 in Energy
Verified
Journal Article
Closed access
HPHyeongmin Park
Hyeongmin Park
JJJunghee Joo
Junghee Joo
JKJiwon Kim
Jiwon Kim
Jechan LeeJechan Lee
Jechan Lee
SKSung-Kon Kim
Sung-Kon Kim

21 November 2022 in Polymers
Verified
Journal Article
Open access
PDF file
JJJunghee Joo
Junghee Joo
HCHeeyoung Choi
Heeyoung Choi
Kun-Yi (Andrew) LinKun-Yi (Andrew) Lin
Kun-Yi (Andrew) Lin
Jechan LeeJechan Lee
Jechan Lee
Quickly changing fashion trends generate tremendous amounts of textile waste globally. The inhomogeneity and complicated nature of textile waste make its recycling challenging. Hence, it is urgent to develop a feasible method to extract value from textile waste. Pyrolysis is an effective waste-to-energy option to processing waste feedstocks having an inhomogeneous and complicated nature. Herein, pyrolysis of denim jeans waste (DJW; a textile waste surrogate) was performed in a continuous flow pyrolyser. The effects of adding sodium carbonate (Na2CO3; feedstock/Na2CO3 = 10, weight basis) to the DJW pyrolysis on the yield and composition of pyrolysates were explored. For the DJW pyrolysis, using Na2CO3 as an additive increased the yields of gas and solid phase pyrolysates and decreased the yield of liquid phase pyrolysate. The highest yield of the gas phase pyrolysate was 34.1 wt% at 800 °C in the presence of Na2CO3. The addition of Na2CO3 could increase the contents of combustible gases such as H2 and CO in the gas phase pyrolysate in comparison with the DJW pyrolysis without Na2CO3. The maximum yield of the liquid phase pyrolysate obtained with Na2CO3 was 62.5 wt% at 400 °C. The composition of the liquid phase pyrolysate indicated that the Na2CO3 additive decreased the contents of organic acids, which potentially improve its fuel property by reducing acid value. The results indicated that Na2CO3 can be a potential additive to pyrolysis to enhance energy recovery from DJW.

6 August 2021 in Polymers
Verified
Journal Article
Open access
PDF file
JJJunghee Joo
Junghee Joo
SLSeonho Lee
Seonho Lee
HCheeyoung choi
heeyoung choi
Kun-Yi (Andrew) LinKun-Yi (Andrew) Lin
Kun-Yi (Andrew) Lin
Jechan LeeJechan Lee
Jechan Lee
Herein, the pyrolysis of two types of single-use disposable waste (single-use food containers and corrugated fiberboard) was investigated as an approach to cleanly dispose of municipal solid waste, including plastic waste. For the pyrolysis of single-use food containers or corrugated fiberboard, an increase in temperature tended to increase the yield of pyrolytic gas (i.e., non-condensable gases) and decrease the yield of pyrolytic liquid (i.e., a mixture of condensable compounds) and solid residue. The single-use food container-derived pyrolytic product was largely composed of hydrocarbons with a wide range of carbon numbers from C1 to C32, while the corrugated fiberboard-derived pyrolytic product was composed of a variety of chemical groups such as phenolic compounds, polycyclic aromatic compounds, and oxygenates involving alcohols, acids, aldehydes, ketones, acetates, and esters. Changes in the pyrolysis temperature from 500 °C to 900 °C had no significant effect on the selectivity toward each chemical group found in the pyrolytic liquid derived from either the single-use food containers or corrugated fiberboard. The co-pyrolysis of the single-use food containers and corrugated fiberboard led to 6 times higher hydrogen (H2) selectivity than the pyrolysis of the single-use food containers only. Furthermore, the co-pyrolysis did not form phenolic compounds or polycyclic aromatic compounds that are hazardous environmental pollutants (0% selectivity), indicating that the co-pyrolysis process is an eco-friendly method to treat single-use disposable waste.