Fluctuating crude oil price and global environmental problems such as global warming and climate change lead to growing demand for the production of renewable chemicals as petrochemical substitutes. Butanol is a nonpolar alcohol that is used in a large variety of consumer products and as an important industrial intermediate. Thus, the production of butanol from renewable resources (e.g., biomass and organic waste) has gained a great deal of attention from researchers. Although typical renewable butanol is produced via a fermentative route (i.e., acetone-butanol-ethanol (ABE) fermentation of biomass-derived sugars), the fermentative butanol production has disadvantages such as a low yield of butanol and the formation of byproducts, such as acetone and ethanol. To avoid the drawbacks, the production of renewable butanol via non-fermentative catalytic routes has been recently proposed. This review is aimed at providing an overview on three different emerging and promising catalytic routes from biomass/organic waste-derived chemicals to butanol. The first route involves the conversion of ethanol into butanol over metal and oxide catalysts. Volatile fatty acid can be a raw chemical for the production of butanol using porous materials and metal catalysts. In addition, biomass-derived syngas can be transformed to butanol on non-noble metal catalysts promoted by alkali metals. The prospect of catalytic renewable butanol production is also discussed.
Herein, the pyrolysis of two types of single-use disposable waste (single-use food containers and corrugated fiberboard) was investigated as an approach to cleanly dispose of municipal solid waste, including plastic waste. For the pyrolysis of single-use food containers or corrugated fiberboard, an increase in temperature tended to increase the yield of pyrolytic gas (i.e., non-condensable gases) and decrease the yield of pyrolytic liquid (i.e., a mixture of condensable compounds) and solid residue. The single-use food container-derived pyrolytic product was largely composed of hydrocarbons with a wide range of carbon numbers from C1 to C32, while the corrugated fiberboard-derived pyrolytic product was composed of a variety of chemical groups such as phenolic compounds, polycyclic aromatic compounds, and oxygenates involving alcohols, acids, aldehydes, ketones, acetates, and esters. Changes in the pyrolysis temperature from 500 °C to 900 °C had no significant effect on the selectivity toward each chemical group found in the pyrolytic liquid derived from either the single-use food containers or corrugated fiberboard. The co-pyrolysis of the single-use food containers and corrugated fiberboard led to 6 times higher hydrogen (H2) selectivity than the pyrolysis of the single-use food containers only. Furthermore, the co-pyrolysis did not form phenolic compounds or polycyclic aromatic compounds that are hazardous environmental pollutants (0% selectivity), indicating that the co-pyrolysis process is an eco-friendly method to treat single-use disposable waste.