A rotary-scan space camera with an area sensor can achieve large width and high-resolution imaging. Designing system parameters properly is important for the application of the rotary-scan space camera. We model the swath, resolution, and overlap rate between frames for such a camera. An optimum algorithm combining the linear weighting method and the Monte Carlo method for system parameter design is proposed based on the model. Then, the performance of the designed system is evaluated using the grid point method. The designed systems can achieve swaths of more than 1000 km and less than 1 m resolution without leakage during the imaging. In the evaluation, the designed system can cover 82.13% of the observation region at the height of 500 km in 6.5 min, and the average repeated observation frequency is 3.26 times per 118 s. The design method is simple and effective in the initial design of the rotary-scan space camera’s system parameters. The system designed can provide “no-leakage and wide coverage by quick scan” and “high-frequency repeated observation over a long visibility period.” This will greatly improve earth observation ability in wide-area search and rescue missions.
1 November 2022 in IEEE Transactions on Geoscience and Remote Sensing
Radiometric calibration of satellites is one of the core technologies for analyzing satellite data quantitatively. For large-aperture remote sensing cameras, the blackbody is placed in the rear optical path due to its weight and size. As a result, the front optics’ self-emission cannot be evaluated when the inner blackbody is observed. To achieve full optical path calibrations, stars are used as radiation calibration sources for large-aperture cameras. In high energy concentration detection systems, the point spread function (PSF), intrapixel sensitivity (IPS), capacitive coupling and sampling phase may cause some energy of the point source to be lost, resulting in an energy difference between the extended and point sources. It is important to note that conventional aperture photometry is not always the ideal method for obtaining high-precision photometry. This paper proposes a method for compensation of point-source signals based on capacitive coupling correction, PSF reconstruction and IPS model, and establishes a response conversion model for stellar and inner blackbodies. According to calibration coefficients based on stars and inner blackbody, the error between the star calibration coefficient and the inner blackbody calibration coefficient is 0.18%, which is better than 59.4% before the proposed method was applied. The error between the two methods can be stabilized within 0.3% within 140 days of the launch of the satellite.
Space infrared (IR) target recognition has always been a key issue in the field of space technology. The imaging distance is long, the target is weak, and the feature discrimination is low, making it difficult to distinguish between high-threat targets and decoys. However, most existing methods ignore the fuzziness of multi-dimensional features, and their performance mainly depends on the accuracy of feature extraction, with certain limitations in handling uncertainty and noise. This article proposes a space IR dim target fusion recognition method, which is based on fuzzy comprehensive of spatio-temporal correlation. First, we obtained multi-dimensional IR features of the target through multi-time and multi-spectral detectors, then we established and calculated the adaptive fuzzy-membership function of the features. Next, we applied the entropy weight method to ascertain the objective fusion weights of each feature and computed the spatially fuzzified fusion judgments for the targets. Finally, the fuzzy comprehensive function was used to perform temporal recursive judgment, and the ultimate fusion recognition result was obtained by integrating the results of each temporal recursive judgment. The simulation and comparative experimental results indicate that the proposed method improved the accuracy and robustness of IR dim target recognition in complex environments. Under ideal conditions, it can achieve an accuracy of 88.0% and a recall of 97.5% for the real target. In addition, this article also analyzes the impact of fusion feature combinations, fusion frame counts, different feature extraction errors, and feature database size on recognition performance. The research in this article can enable space-based IR detection systems to make more accurate and stable decisions, promoting defense capabilities and ensuring space security.