Over the last half century, scientists and engineers have developed methods to better understand and mitigate the damage caused by tsunamis. According to U.S. Federal Emergency Management Agency (FEMA) P646, buildings in many regions, including the U.S. Pacific Northwest, will experience substantial ground shaking from an offshore earthquake that precedes a tsunami and then experience the tsunami forces themselves. Thus, both hazards should be considered in computing the damage and collapse risk to buildings. This article summarizes a basic approach to numerically consider the successive seismic and tsunami risk to buildings in near-field tsunami regions such as the U.S. Pacific Northwest.

Tsunamis have devastated coastal regions worldwide, with the most recent being the result of the Great Tohoku Japan earthquake and tsunami, which was a M9.0 undersea megathrust earthquake that occurred off the east coast of Japan on March 11, 2011. In this study, a fragility formulation is utilized to develop and illustrate the concept of community fragilities for a community subjected to a wave of a particular height because fragilities are independent of occurrence rate. The fragility formulation for single structures is explained and then extended to the community scale by assigning one of eight archetype structural models and corresponding fragility to each of the buildings in a community. One key feature of the approach is that both the earthquake and tsunami are considered in succession. Three wave forces, i.e., hydrostatic, hydrodynamic, and impulsive wave forces, and the successive hazard loadings, i.e., earthquakes and tsunamis, were considered during the analysis. While debris loading is...

The study of earthquake engineering has made significant strides over the last one-half century with scientists developing methods to better understand the basis and mechanisms of earthquakes and engineers working to mitigate economic loss and fatalities. A paradigm known as performance-based seismic design (PBSD) not only provides life safety to building occupants, but seeks to control structural and nonstructural damage in buildings and other structures. The development of fragility curves based on the well-known Park-Ang damage index is examined herein. This type of formulation can provide the information needed to assess the seismic vulnerability of a structure. Existing shake table test data from the NEESWood Project’s test of a 223 m2 (1,800 sq ft) two-story house was combined with a participant survey to calibrate a damage model. The result was the development of damage fragilities based exclusively on nonlinear time history analysis. Then, the proposed numerical damage model was applied and fragi...

Slope failure is a natural hazard occurring around the world and can lead to severe damage of properties and loss of lives. Even in stabilized slopes, changes in external loads, such as those from earthquakes, may cause slope failure and collapse, generating social impacts and, eventually causing loss of lives. In this research, the slope stability changes caused by the Gyeongju earthquake, which occurred on 12 September 2016, are numerically analyzed in a slope located in the Gyeongju area, South Korea. Slope property data, collected through an on-site survey, was used in the analysis. Additionally, slope stability changes with and without the earthquake were analyzed and compared. The analysis was performed within a peak ground acceleration (PGA) range of 0.0 (g)–2.0 (g) to identify the correlation between the slope safety factor and peak ground acceleration. The correlation between the slope safety factor and peak ground acceleration could be used as a reference for performing on-site slope stability evaluations. It also provides a reference for design and earthquake stability improvements in the slopes of road and tunnel construction projects, thus supporting the attainment of slope stability in South Korea.