Xiang-dong Huang

Mr. Xiang-dong Huang

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 October 2021 in Science Progress
Verified
Journal Article
Open access
PDF file
ZZZhiping Zeng
Zhiping Zeng
GHGuanghui Hu
Guanghui Hu
XHXiang-dong Huang
Xiang-dong Huang
WWWeidong Wang
Weidong Wang
AQAyoub Abdullah Senan Qahtan
Ayoub Abdullah Senan Qahtan
JWJundong Wang
Jundong Wang
Low-Vibration Tracks (LVTs) are widely used in subway tunnels for their excellent performance, but the application in heavy-duty railways still requires a lot of feasibility studies. In this study, the statics performance of LVT under different axle loads, load direction, and load position is explored using the finite element software Abaqus. The Timoshenk beam element and nonlinear spring element 3D solid element are used to represent rails, fasteners, and the other track structure respectively. The paper established the finite element model of LVT to study the mechanical characteristics of low vibration track structure under varying loading condition. The applied loads are determined according to the Heavy-Haul Railway Track Structure Design Code. The results shows: (1) The deformation and stress of the LVT structure show a linear relationship with the increase of the axle load. (2) Slab end loading and lateral load are more unfavorable to the stress and deformation of the track structure. When slab end is loaded with vertical load, the vertical load is distributed on four supporting blocks along the longitudinal direction with a ratio of 1:4:4:1, and the lateral direction is mainly borne by two adjacent fastener nodes with the total load proportion of 47% and 47% respectively. (3) The LVT structure can guarantee the safety of static performance under 30 t axle load and the maximum axle load should not exceed 36 t. The paper provides a guideline for the construction and maintenance of LVT structure in heavy haul railway.

1 April 2021 in Science Progress
Verified
Journal Article
Open access
PDF file
ZZZhiping Zeng
Zhiping Zeng
JHJi Hu
Ji Hu
CTChunyu Tian
Chunyu Tian
PLPing Li
Ping Li
XHXiang-dong Huang
Xiang-dong Huang
ASAbdulmumin Ahmed Shuaibu
Abdulmumin Ahmed Shuaibu
To study subway turnouts’ adaptability to steep gradients, a finite element model of a metro No. 9 simple turnout was established. The main works include: (1) The train’s most unfavourable loading condition was modelled. (2) The turnout’s longitudinal displacement and stress were analysed with different gradients under the train braking load, temperature change load and a combination of the two, to determine the structure’s safety and stability under the most unfavourable working conditions. (3) The turnout structure’s cumulative longitudinal deformation under reciprocating load was studied. Both a fastener longitudinal resistance-displacement experiment under reciprocating load and a numerical simulation of No. 9 turnout modelled by the finite element modelling software, ANSYS, were carried out to study the gradient’s influence on the turnout’s longitudinal mechanical characteristics. (1) The turnout’s longitudinal displacement and stress increase linearly with an increase in gradient and temperature change, both of which are unfavourable to the turnout structure. As the gradient increases from 0‰ to 30‰, the longitudinal stress and displacement increase by more than 10%. (2) The turnout’s rail strength and displacement on a 30‰ slope under the most unfavourable load conditions are within the specification limitations. (3) Under reciprocating load, the fastener longitudinal stiffness decreases and the maximum and residual longitudinal displacement of the switch rail increase; an increased gradient intensifies these effects on the turnout.

1 April 2021 in IOP Conference Series: Earth and Environmental Science
Verified
Conference Paper
Open access
PDF file
ZZZhiping Zeng
Zhiping Zeng
XHXiang-dong Huang
Xiang-dong Huang
WWWeidong Wang
Weidong Wang
WGWuji Guo
Wuji Guo
MYMengxuan Ye
Mengxuan Ye
Rigid body with initial velocity and no gravity contact with the elastomer, this process is too short and it can be described by collision. The geometry shape of contact surface is same as the contour of rigid body. Under the excitation of initial velocity, the particles of the contact surface produce motion and propagate around as the stress wave. The moving energy of rigid body is gradually consumed under the action of surface reaction force and goes through the deceleration stage. During the collision process, there is a continuous symmetrical stress pulse at the contact surface. This paper first discusses the interfacial stress pulse characteristics of infinite cylindrical side and elastomer under the condition of initial velocity and no gravity. And then the formation process of surface and surface particle stress pulse, the law of collision time and contact surface width are analyzed. This research is useful for the study of interfacial stress in finite boundary collision.

1 April 2021 in Science Progress
Verified
Journal Article
Open access
PDF file
ZZZhiping Zeng
Zhiping Zeng
JHJi Hu
Ji Hu
WGWuji Guo
Wuji Guo
XHXiang-dong Huang
Xiang-dong Huang
PLPing Li
Ping Li
ASAbdulmumin Ahmed Shuaibu
Abdulmumin Ahmed Shuaibu
The train sometimes needs to brake frequently on the turnout, although the braking force does not exceed the limit resistance of fastener, cumulative displacement of rail occurs because of the long-term effect of the train brakes, thus, the relationship between the cumulative displacement of rail and the number of train braking actions should be explored. Aiming at the spring bar type III fastener, a 1:1 physical indoor simulation test was carried out, and an electromagnetic relay device was used to simulate the train load, force, and displacement sensors for data collection. Then a single load no more than the maximum resistance of fastener was applied to the rail end to explore the relationship between the number of loads and the rail cumulative deformation. The rail longitudinal cumulative displacement changes linearly in positive correlation with the number of load actions, and increases faster when the number of load actions is small. As the number of repeated loads increases, the above-mentioned relationship approximately and credibly obeys the power function distribution. Repeatedly applying load no more than the maximum longitudinal resistance of fastener to the rail, the existence of the rail cumulative displacement caused by frequent train braking can be demonstrated, and the relationship curve between the rail displacement and the number of loads can be obtained. Applying the fitting formula, the rail displacement after a specific number of loading times can be attained, and then referring to specific codes, we can determine whether it will exceed the safety limit.