With the rapid development of urban rail transit, the intensity and impact range of train-induced vibrations are increasing. Investigating the transmission characteristics and attenuation patterns of these vibrations in track structures aids in understanding train-induced environmental vibrations. This study conducted rail impact experiments on a long sleeper integrated slab of a straight section of a subway tunnel. The hammer struck the rail at various positions, and acceleration sensors recorded the responses of the rail, slab, and tunnel. In order to determine the impact force, the vertical wheel–rail force and the vibration response of track structures were measured. Then, the Lance-LC1304B force hammer was selected for the experiment, and the hammer impact force reached 30 kN, the magnitude of which reached the measured wheel–rail force size for the line. Based on the results of the impact tests, the vibration attenuation characteristics of the track structure were analyzed. Accordingly, reference values for the truncation time and truncation distance in the vehicle–track coupled dynamics model’s moving window were provided. By comparing the results of the hammering experiment with the train-induced vibration results, the main excitation frequencies during train operation were determined. These findings provide valuable insights for the development of rail transit systems.
The train sometimes needs to brake frequently on the turnout, although the braking force does not exceed the limit resistance of fastener, cumulative displacement of rail occurs because of the long-term effect of the train brakes, thus, the relationship between the cumulative displacement of rail and the number of train braking actions should be explored. Aiming at the spring bar type III fastener, a 1:1 physical indoor simulation test was carried out, and an electromagnetic relay device was used to simulate the train load, force, and displacement sensors for data collection. Then a single load no more than the maximum resistance of fastener was applied to the rail end to explore the relationship between the number of loads and the rail cumulative deformation. The rail longitudinal cumulative displacement changes linearly in positive correlation with the number of load actions, and increases faster when the number of load actions is small. As the number of repeated loads increases, the above-mentioned relationship approximately and credibly obeys the power function distribution. Repeatedly applying load no more than the maximum longitudinal resistance of fastener to the rail, the existence of the rail cumulative displacement caused by frequent train braking can be demonstrated, and the relationship curve between the rail displacement and the number of loads can be obtained. Applying the fitting formula, the rail displacement after a specific number of loading times can be attained, and then referring to specific codes, we can determine whether it will exceed the safety limit.