Ahmed Azouz

Dr. Ahmed Azouz

Lecturer -Military Technical College
orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 February 2022 in Sensors
Verified
Journal Article
Open access
PDF file
AMAhmed Elgbily Mahdi
Ahmed Elgbily Mahdi
Ahmed AzouzAhmed Azouz
Ahmed Azouz
AAAhmed Elsaid Abdalla
Ahmed Elsaid Abdalla
Ashraf AbosekeenAshraf Abosekeen
Ashraf Abosekeen
The inertial navigation system (INS) is a basic component to obtain a continuous navigation solution in various applications. The INS suffers from a growing error over time. In particular, its navigation solution depends mainly on the quality and grade of the inertial measurement unit (IMU), which provides the INS with both accelerations and angular rates. However, low-cost small micro-electro-mechanical systems (MEMSs) suffer from huge error sources such as bias, the scale factor, scale factor instability, and highly non-linear noise. Therefore, MEMS-IMU measurements lead to drifts in the solutions when used as a control input to the INS. Accordingly, several approaches have been introduced to model and mitigate the errors associated with the IMU. In this paper, a machine-learning-based adaptive neuro-fuzzy inference system (ML-based-ANFIS) is proposed to leverage the performance of low-grade IMUs in two phases. The first phase was training 50% of the low-grade IMU measurements with a high-end IMU to generate a suitable error model. The second phase involved testing the developed model on the remaining low-grade IMU measurements. A real road trajectory was used to evaluate the performance of the proposed algorithm. The results showed the effectiveness of utilizing the proposed ML-ANFIS algorithm to remove the errors and improve the INS solution compared to the traditional one. An improvement of 70% in the 2D positioning and of 92% in the 2D velocity of the INS solution were attained when the proposed algorithm was applied compared to the traditional INS solution.

2 July 2023 in Sensors
Verified
Journal Article
Open access
PDF file
Ahmed Ibrahim ElkhalilAhmed Ibrahim Elkhalil
Ahmed Ibrahim Elkhalil
Ashraf AbosekeenAshraf Abosekeen
Ashraf Abosekeen
Ahmed AzouzAhmed Azouz
Ahmed Azouz
Aboelmagd NoureldinAboelmagd Noureldin
Aboelmagd Noureldin
High-precision navigation solutions are a main requirement for autonomous vehicle (AV) applications. Global navigation satellite systems (GNSSs) are the prime source of navigation information for such applications. However, some places such as tunnels, underpasses, inside parking garages, and urban high-rise buildings suffer from GNSS signal degradation or unavailability. Therefore, another system is required to provide a continuous navigation solution, such as the inertial navigation system (INS). The vehicle’s onboard inertial measuring unit (IMU) is the main INS input measurement source. However, the INS solution drifts over time due to IMU-associated errors and the mechanization process itself. Therefore, INS/GNSS integration is the proper solution for both systems’ drawbacks. Traditionally, a linearized Kalman filter (LKF) such as the extended Kalman filter (EKF) is utilized as a navigation filter. The EKF deals only with the linearized errors and suppresses the higher orders using the Taylor expansion up to the first order. This paper introduces a loosely coupled INS/GNSS integration scheme using the invariant extended Kalman filter (IEKF). The IEKF state estimate is independent of the Jacobians that are derived in the EKF; instead, it uses the matrix Lie group. The proposed INS/GNSS integration using IEKF is applied to a real road trajectory for performance validation. The results show a significant enhancement when using the proposed system compared to the traditional INS/GNSS integrated system that uses EKF in both GNSS signal presence and blockage cases. The overall trajectory 2D-position RMS error reduced from 19.4 m to 3.3 m with 82.98% improvement and the 2D-position max error reduced from 73.9 m to 14.2 m with 80.78% improvement.

1 June 2021 in Sensors
Verified
Journal Article
Open access
PDF file
Ahmed AzouzAhmed Azouz
Ahmed Azouz
Ashraf AbosekeenAshraf Abosekeen
Ashraf Abosekeen
Sameh NassarSameh Nassar
Sameh Nassar
Mohamed HanafyMohamed Hanafy
Mohamed Hanafy
Pulse compression techniques are commonly used in linear frequency modulated (LFM) waveforms to improve the signal-to-noise ratios (SNRs) and range resolutions of pulsed radars, whose detection capabilities are affected by the sidelobes. In this study, a sidelobe reduction filter (SRF) was designed and implemented using software defined radio (SDR). An enhanced matched filter (EMF) that combines a matched filter (MF) and an SRF is proposed and was implemented. In contrast to the current commonly used approaches, the mathematical model of the SRF frequency response is extracted without depending on any iteration methods or adaptive techniques, which results in increased efficiency and computational speed for the developed model. The performance of the proposed EMF was verified through the measurement of four metrics, including the peak sidelobe ratio (PSLR), the impulse response width (IRW), the mainlobe loss ratio (MLR), and the receiver operational characteristics (ROCs) at different SNRs. The ambiguity function was then used to characterize the Doppler effect on the designed EMF. In addition, the detection of single and multiple targets using the proposed EMF was performed, and the results showed that it overcame the masking problem due to its effective reduction of the sidelobes. Hence, the practical application of the EMF matches the performance analysis. Moreover, when implementing the EMF proposed in this paper, it outperformed the common MF, especially when detecting targets moving at low speeds and having small radar cross-sections (RCS), even under severe masking conditions.

1 April 2015 in IET Radar, Sonar & Navigation
Verified
Journal Article
Open access
PDF file
Ahmed AzouzAhmed Azouz
Ahmed Azouz
ZLZhenfang Li
Zhenfang Li
Unmanned aerial vehicle (UAV) synthetic aperture radar (SAR) is an essential tool for modern remote sensing applications. Owing to its size and weight constraints, UAV is very sensitive to atmospheric turbulence that causes serious trajectory deviations. In this study, an improved phase gradient autofocus (PGA) motion compensation approach is proposed for UAV‐SAR imagery. The approach is implemented in two steps. The first step determines the length of each segment depending on number of good quality scatterers and motion errors obtained from navigation data. In the second step, a novel minimum‐entropy phase correction based on the discrete cosine transform (DCT) coefficients is proposed. In this approach, transform phase error estimated by PGA to DCT‐coefficients that represent the phase error in the frequency or time–frequency domain. The entropy of a focused image is utilised as the optimisation function of the DCT‐coefficients to improve the final image quality. Finally, real‐data experiments show that the proposed approach is appropriate for highly precise imaging of UAV‐SAR equipped with only low‐accuracy inertial navigation systems.

20 March 2024 in Sensors
Verified
Journal Article
Open access
PDF file
AMAhmed Elgbily Mahdi
Ahmed Elgbily Mahdi
Ahmed AzouzAhmed Azouz
Ahmed Azouz
Aboelmagd NoureldinAboelmagd Noureldin
Aboelmagd Noureldin
Ashraf AbosekeenAshraf Abosekeen
Ashraf Abosekeen
Autonomous vehicles (AVs) require accurate navigation, but the reliability of Global Navigation Satellite Systems (GNSS) can be degraded by signal blockage and multipath interference in urban areas. Therefore, a navigation system that integrates a calibrated Reduced Inertial Sensors System (RISS) with GNSS is proposed. The system employs a machine-learning-based Adaptive Neuro-Fuzzy Inference System (ANFIS) as a novel calibration technique to improve the accuracy and reliability of the RISS. The ANFIS-based RISS/GNSS integration provides a more precise navigation solution in such environments. The effectiveness of the proposed integration scheme was validated by conducting tests using real road trajectory and simulated GNSS outages ranging from 50 to 150 s. The results demonstrate a significant improvement in 2D position Root Mean Square Error (RMSE) of 43.8% and 28% compared to the traditional RISS/GNSS and the frequency modulated continuous wave (FMCW) Radar (Rad)/RISS/GNSS integrated navigation systems, respectively. Moreover, an improvement of 47.5% and 23.4% in 2D position maximum errors is achieved compared to the RISS/GNSS and the Rad/RISS/GNSS integrated navigation systems, respectively. These results reveal significant improvements in positioning accuracy, which is essential for safe and efficient navigation. The long-term stability of the proposed system makes it suitable for various navigation applications, particularly those requiring continuous and precise positioning information. The ANFIS-based approach used in the proposed system is extendable to other low-end IMUs, making it an attractive option for a wide range of applications.

3 July 2014 in International Journal of Remote Sensing
Verified
Journal Article
Closed access
Ahmed AzouzAhmed Azouz
Ahmed Azouz
ZLZhenfang Li
Zhenfang Li
This article concerns the analysis and compensation of track deviations in high-resolution automobile synthetic aperture radar (SAR). We establish the geometry in which the automobile-SAR raw data is acquired. Based on the derived model, the research investigates the impact of track deviations on the final focused image quality and we propose a motion compensation strategy which can be applied to obtain a well-focused SAR image. This article presents how to obtain the accurate positions of the antenna phase centre using the velocity and attitude angles measured by inertial navigation system/global positioning system, and proposes a new method to compensate for forward velocity errors which are decomposed into two components and compensated individually, that is, high-order and low-order phase compensation. Finally, the results from both simulated data and real data are presented to validate the whole analysis and the proposed procedure.