Ashraf Abosekeen

Dr. Ashraf Abosekeen

Electrical Engineering, Military Technical College, Cairo, Al Qāhirah, Egypt
+3
orcid

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 February 2022 in Sensors
Verified
Journal Article
Open access
PDF file
AMAhmed Elgbily Mahdi
Ahmed Elgbily Mahdi
Ahmed AzouzAhmed Azouz
Ahmed Azouz
AAAhmed Elsaid Abdalla
Ahmed Elsaid Abdalla
Ashraf AbosekeenAshraf Abosekeen
Ashraf Abosekeen
The inertial navigation system (INS) is a basic component to obtain a continuous navigation solution in various applications. The INS suffers from a growing error over time. In particular, its navigation solution depends mainly on the quality and grade of the inertial measurement unit (IMU), which provides the INS with both accelerations and angular rates. However, low-cost small micro-electro-mechanical systems (MEMSs) suffer from huge error sources such as bias, the scale factor, scale factor instability, and highly non-linear noise. Therefore, MEMS-IMU measurements lead to drifts in the solutions when used as a control input to the INS. Accordingly, several approaches have been introduced to model and mitigate the errors associated with the IMU. In this paper, a machine-learning-based adaptive neuro-fuzzy inference system (ML-based-ANFIS) is proposed to leverage the performance of low-grade IMUs in two phases. The first phase was training 50% of the low-grade IMU measurements with a high-end IMU to generate a suitable error model. The second phase involved testing the developed model on the remaining low-grade IMU measurements. A real road trajectory was used to evaluate the performance of the proposed algorithm. The results showed the effectiveness of utilizing the proposed ML-ANFIS algorithm to remove the errors and improve the INS solution compared to the traditional one. An improvement of 70% in the 2D positioning and of 92% in the 2D velocity of the INS solution were attained when the proposed algorithm was applied compared to the traditional INS solution.

18 March 2020 in IEEE Transactions on Intelligent Transportation Systems
Verified
Journal Article
Closed access
Ashraf AbosekeenAshraf Abosekeen
Ashraf Abosekeen
Umar IqbalUmar Iqbal
Umar Iqbal
Aboelmagd NoureldinAboelmagd Noureldin
Aboelmagd Noureldin
Michael KorenbergMichael Korenberg
Michael Korenberg
Global Navigation Satellite Systems (GNSS) is utilized to provide route guidance information to land and autonomous vehicles. The GNSS-based positioning and navigation (POS/NAV) usually suffer from satellite signal blockage, interference, and multipath in urban areas. Autonomous land vehicles are equipped with cameras, radars, and laser ranging devices. The availability of these systems provides an attractive opportunity to increase the POS/NAV system accuracy. This research focuses on the development of an integrated multi-sensor POS/NAV system capable of offering seamless positioning for autonomous land vehicles. A new multi-sensor POS/NAV module integrating both adaptive cruise control frequency modulated continuous wave (ACC-FMCW) radar (RAD), and magnetometer measurements with the reduced inertial sensor system (RISS) was designed to update the navigation system during GNSS outages. Augmenting RAD/RISS system with the magnetometer measurements produces a robust solution. The designed system is further improved by utilizing fast orthogonal search (FOS) to provide nonlinear error modeling of the residual errors associated with the RAD/RISS positioning solution in order to reduce the error growth overextended and frequent GNSS outages.The proposed systems were evaluated on several real road test trajectories involving different types of land vehicles experiencing different motion dynamics. GNSS outages of up to 10 minutes were intentionally introduced to examine the performance. The results show that the proposed methods have resulted in a significant performance improvement in the positioning accuracy that can reach more than 80% if compared to the present techniques that rely only on integrating the inertial sensor technology with GNSS.

2 July 2023 in Sensors
Verified
Journal Article
Open access
PDF file
Ahmed Ibrahim ElkhalilAhmed Ibrahim Elkhalil
Ahmed Ibrahim Elkhalil
Ashraf AbosekeenAshraf Abosekeen
Ashraf Abosekeen
Ahmed AzouzAhmed Azouz
Ahmed Azouz
Aboelmagd NoureldinAboelmagd Noureldin
Aboelmagd Noureldin
High-precision navigation solutions are a main requirement for autonomous vehicle (AV) applications. Global navigation satellite systems (GNSSs) are the prime source of navigation information for such applications. However, some places such as tunnels, underpasses, inside parking garages, and urban high-rise buildings suffer from GNSS signal degradation or unavailability. Therefore, another system is required to provide a continuous navigation solution, such as the inertial navigation system (INS). The vehicle’s onboard inertial measuring unit (IMU) is the main INS input measurement source. However, the INS solution drifts over time due to IMU-associated errors and the mechanization process itself. Therefore, INS/GNSS integration is the proper solution for both systems’ drawbacks. Traditionally, a linearized Kalman filter (LKF) such as the extended Kalman filter (EKF) is utilized as a navigation filter. The EKF deals only with the linearized errors and suppresses the higher orders using the Taylor expansion up to the first order. This paper introduces a loosely coupled INS/GNSS integration scheme using the invariant extended Kalman filter (IEKF). The IEKF state estimate is independent of the Jacobians that are derived in the EKF; instead, it uses the matrix Lie group. The proposed INS/GNSS integration using IEKF is applied to a real road trajectory for performance validation. The results show a significant enhancement when using the proposed system compared to the traditional INS/GNSS integrated system that uses EKF in both GNSS signal presence and blockage cases. The overall trajectory 2D-position RMS error reduced from 19.4 m to 3.3 m with 82.98% improvement and the 2D-position max error reduced from 73.9 m to 14.2 m with 80.78% improvement.

1 October 2019 in IET Radar, Sonar & Navigation
Verified
Journal Article
Open access
PDF file
Ashraf AbosekeenAshraf Abosekeen
Ashraf Abosekeen
TKTashfeen B. Karamat
Tashfeen B. Karamat
Aboelmagd NoureldinAboelmagd Noureldin
Aboelmagd Noureldin
MKMichael J. Korenberg
Michael J. Korenberg
Autonomous and land vehicles’ navigation in urban canyons requires aiding from other systems to the Global Navigation Satellite System (GNSS). This kind of environment is characterised by containing high rise buildings and long tunnels which interfere with the GPS satellite's signals causing its partial or total blockage. Therefore, the utilisation of another positioning source with high fidelity solution is essential during long outage periods. The Adaptive Cruise Control (ACC) system is a critical unit in the Advanced Drive Assistant System. The ACC measures the relative speed and distance between the on‐board vehicle and the vehicle in front. In this study, the ACC radar and an azimuth gyroscope are utilised to produce a self‐contained positioning system. The position solution of this system is utilised to update the Inertial Navigation System during the GNSS outage periods. The proposed system was tested over real road trajectories which were conducted in an urban canyon to validate the efficiency of the system.

29 March 2022
Verified
Conference Paper
Closed access
AMAhmed E. Mahdi
Ahmed E. Mahdi
AAAhmed Azouz
Ahmed Azouz
AAAhmed Abdalla
Ahmed Abdalla
Ashraf AbosekeenAshraf Abosekeen
Ashraf Abosekeen
The inertial navigation system (INS) is the primary exporter of navigation information in autonomous vehicle (AV) applications. The main component of the INS is the inertial measuring unit (IMU) which is responsible for providing the INS with both angular rates and accelerations. However, the IMU suffers from several types of errors. Some of these errors are deterministic such as bias offset and scale factor while other errors are stochastic such as bias instability, bias drift, and noise. Therefore, the IMUs especially the low-cost micro-electro-mechanical systems (MEMS) provide the INS with drifted raw measurements. Thus, a accumulative error over time affects the INS navigation solution. Recently, the errors related with IMU are modeled and mitigated bu using machine learning (ML) techniques. In this paper, an adaptive neuro-fuzzy inference system (ANFIS) is introduced to improve the effectiveness of low-grade IMUs by estimating and removing the associated errors. A high-fidelity simulated UAV trajectory was utilized to assess the effectiveness of the suggested algorithm. The improvement in the INS navigation solution ia very clear after using the proposed ML-based-ANFIS algorithm with regards to the traditional INS. The solutionis improved by 84.2% and 87.5% in the 2D-positioning and 3D-positioning respectively. Furthermore, 86% and 88.8% in the 2D-velocity and 3D-velocity respectively is achieved when evaluated with regards to the conventional INS solution.

1 June 2021 in Sensors
Verified
Journal Article
Open access
PDF file
Ahmed AzouzAhmed Azouz
Ahmed Azouz
Ashraf AbosekeenAshraf Abosekeen
Ashraf Abosekeen
Sameh NassarSameh Nassar
Sameh Nassar
Mohamed HanafyMohamed Hanafy
Mohamed Hanafy
Pulse compression techniques are commonly used in linear frequency modulated (LFM) waveforms to improve the signal-to-noise ratios (SNRs) and range resolutions of pulsed radars, whose detection capabilities are affected by the sidelobes. In this study, a sidelobe reduction filter (SRF) was designed and implemented using software defined radio (SDR). An enhanced matched filter (EMF) that combines a matched filter (MF) and an SRF is proposed and was implemented. In contrast to the current commonly used approaches, the mathematical model of the SRF frequency response is extracted without depending on any iteration methods or adaptive techniques, which results in increased efficiency and computational speed for the developed model. The performance of the proposed EMF was verified through the measurement of four metrics, including the peak sidelobe ratio (PSLR), the impulse response width (IRW), the mainlobe loss ratio (MLR), and the receiver operational characteristics (ROCs) at different SNRs. The ambiguity function was then used to characterize the Doppler effect on the designed EMF. In addition, the detection of single and multiple targets using the proposed EMF was performed, and the results showed that it overcame the masking problem due to its effective reduction of the sidelobes. Hence, the practical application of the EMF matches the performance analysis. Moreover, when implementing the EMF proposed in this paper, it outperformed the common MF, especially when detecting targets moving at low speeds and having small radar cross-sections (RCS), even under severe masking conditions.