Control of solidification structure and crystallographic texture during metal additive manufacturing is a challenging work which attracts the increasing interest of researchers. In the present work, two kinds of scanning strategies (i.e., single-directional scanning (SDS) and cross-directional scanning (CDS) were used to control the solidification structure and crystallographic texture during quasi-continuous-wave laser additive manufacturing (QCW-LAM) of Inconel 718. The results show that the solidification structure and texture are strongly dependent on scanning strategies. The SDS develops a typical fiber texture with unidirectional columnar grains, whereas the CDS develops a more random texture with a mixture of unidirectional and multidirectional grains. In addition, the SDS promotes the continuously epitaxial growth of columnar dendrites and results in the linearly distributed Laves phase particles, while the CDS leads to the alternately distributed Laves phase particles with chain-like morphology and discrete morphology. The changed stacking features of molten-pool boundary and the switched heat flow direction caused by different scanning strategies plays a crucial role on the epitaxial growth of dendrites and the final solidification structure of the fabricated parts.
Transition metal nitride coatings often face a trade-off between thermal stability and oxidation resistance at high temperatures. Here, we address this challenge using a mechanism-guided high-throughput combinatorial strategy, implemented through multi-target co-deposition, to rapidly probe the Al-Cr-Ti-Si-N compositional space. An optimal composition window was identified (Al 13.3-24.1 at.%, Cr 7.6-14.6 at.%, Ti 10.4-23.9 at.%, Si 1.3-3.2 at.%). Coatings within this window exhibit high hardness (> 32 GPa), maintain a face-centered cubic (fcc) matrix up to 1,000 °C, and form oxide scales thinner than 0.5 μm after oxidation at 1,000 °C. Multi-scale characterization reveals that these outstanding properties originate from nanoscale synergistic mechanisms. Specifically, spinodal decomposition generates Ti-rich and Al/Cr-rich domains. These domains, coupled with dense dislocation networks and pronounced lattice distortion, collectively underpin mechanical robustness and structural stability. The inner SiO2 and intermediate (Cr,Al)2O3 layers act together to block oxygen diffusion and metal ion migration, resulting in exceptional oxidation resistance. High-speed dry cutting tests validate the engineering relevance of these coatings, showing a tool life up to 2.4 times longer than that of commercial AlTiN coatings. This work resolves the stability-oxidation trade-off and establishes a generalizable pathway for the rational design of multicomponent ceramic coatings.
12 January 2026 in Materials Chemistry and Physics
The segregation of brittle Laves phases remains a critical bottleneck limiting the performance of additive manufacturing (AM) nickel-based superalloys. While its evolution is governed by complex transient physical fields within the melt pool, a quantitative kinetic correlation between processing parameters and microstructural features is currently lacking. In this study, a high-fidelity multiphysics numerical model was developed to establish a cross-scale mapping logic of “Process-Physical Field-Microstructure” by dissecting the global distribution of temperature gradient (G) and solidification rate (R) along the quasi-steady-state melt pool boundary. It is revealed that increasing the scanning speed synergistically enhances R while compressing G. Beyond driving a transition from oriented columnar dendrites to refined mixed-dendritic structures, this shift effectively blocks the continuous enrichment channels of Nb and Mo elements by compressing the “kinetic time window” for solute redistribution. Consequently, the morphology of the Laves phase is forced to evolve from a continuous interconnected chain-like network into dispersed isolated particles. This research clarifies the kinetic essence of microstructural evolution under non-equilibrium solidification, providing critical physical criteria for the precise intervention of deleterious phases and the regulation of microstructural consistency in high-performance AM components.
1 January 2026 in IEEE Transactions on Instrumentation and Measurement