Hot cracking is a frequent and severe defect that occurs during laser additive manufacturing of superalloys. In this work, a pulsed-wave (PW) laser modulation process was employed to control the solidification microstructure and reduce the hot cracking susceptibility of laser additive manufactured cobalt-based superalloy. The effects of continuous-wave (CW) and PW laser processing modes on the dendrite morphology, element segregation, eutectic phase, and hot cracking of fabricated Co-based superalloys were investigated. Optical microscopy, scanning electron microscopy, and energy-dispersive X-ray spectroscopy were used to characterize the microstructural characteristics of samples. A two-color pyrometer was used to measure the molten pool temperature variation under different laser processing modes. The results show that coarse columnar dendrites, chain-like eutectic carbides, and hot cracks were observed in the CW sample. In contrast, the fine equiaxed crystals, discrete eutectic carbides, and low-level residual stresses were obtained to avoid hot cracks, owing to the high cooling rate and the periodic melting and solidification of the molten pool under the PW laser processing mode. This work provides a new method for controlling solidification structure and hot cracking of laser additive manufactured Co-based superalloy.
The segregation of brittle Laves phases remains a critical bottleneck limiting the performance of additive manufacturing (AM) nickel-based superalloys. While its evolution is governed by complex transient physical fields within the melt pool, a quantitative kinetic correlation between processing parameters and microstructural features is currently lacking. In this study, a high-fidelity multiphysics numerical model was developed to establish a cross-scale mapping logic of “Process-Physical Field-Microstructure” by dissecting the global distribution of temperature gradient (G) and solidification rate (R) along the quasi-steady-state melt pool boundary. It is revealed that increasing the scanning speed synergistically enhances R while compressing G. Beyond driving a transition from oriented columnar dendrites to refined mixed-dendritic structures, this shift effectively blocks the continuous enrichment channels of Nb and Mo elements by compressing the “kinetic time window” for solute redistribution. Consequently, the morphology of the Laves phase is forced to evolve from a continuous interconnected chain-like network into dispersed isolated particles. This research clarifies the kinetic essence of microstructural evolution under non-equilibrium solidification, providing critical physical criteria for the precise intervention of deleterious phases and the regulation of microstructural consistency in high-performance AM components.