Jianlong Liu

Prof. Dr. Jianlong Liu

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 July 2021 in Sensors
Verified
Journal Article
Open access
PDF file
JLJianlong Liu
Jianlong Liu
XLXin Li
Xin Li
RJRuirui Jiang
Ruirui Jiang
KYKaiqiang Yang
Kaiqiang Yang
JZJing Zhao
Jing Zhao
BZBaoqing Zeng
Baoqing Zeng
Terahertz waves are expected to be used in next-generation communications, detection, and other fields due to their unique characteristics. As a basic part of the terahertz application system, the terahertz detector plays a key role in terahertz technology. Due to the two-dimensional structure, graphene has unique characteristics features, such as exceptionally high electron mobility, zero band-gap, and frequency-independent spectral absorption, particularly in the terahertz region, making it a suitable material for terahertz detectors. In this review, the recent progress of graphene terahertz detectors related to photovoltaic effect (PV), photothermoelectric effect (PTE), bolometric effect, and plasma wave resonance are introduced and discussed.

17 December 2019 in IEEE Access
Verified
Journal Article
Open access
ZDZhiliao Du
Zhiliao Du
ZWZhe WU
Zhe WU
WGWeiwei Gan
Weiwei Gan
GLGao Liu
Gao Liu
XZXianfeng Zhang
Xianfeng Zhang
BZBaoqing Zeng
Baoqing Zeng
The recent rapid growth of the semiconductor industry in development of high power microwave source has open a new promising avenue by full electronic control over the electromagnetic field towards improve the microwave heating performance. In this paper, a coupled electromagnetic and heat transfer model was built to simulate microwave heating of multiple chicken blocks with temperature-dependent dielectric properties dependent on a solid-state microwave oven. Owing to the ability of solid-state source to precisely control the frequency, the temperature distribution simulated for the fixed frequency was compared with different frequency-shifted rates increasing process and decreacsing process between 2.4GHz and 2.5GHz. The simulated temperature distribution was validated by comparing with experimental temperature profiles obtained using a thermal imaging camera at the end of microwave heating. The results demonstrated the heating uniformity and efficiency is highly influenced by the head and tail frequency but also the frequency shifted rate. And a specific frequency-shifted rate decreasing process between 2.4GHz and 2.5GHz was proposed in improving the heating performance.

1 August 2020 in AIP Advances
Verified
Journal Article
Open access
PDF file
PZPeiyang Zhao
Peiyang Zhao
WGWeiwei Gan
Weiwei Gan
CFChuanqi Feng
Chuanqi Feng
ZQZhongxing Qu
Zhongxing Qu
JLJianlong Liu
Jianlong Liu
BZBaoqing Zeng
Baoqing Zeng
Usually, the fluidity of liquids is considered to make the temperature field uniform, when it is heated, because of the heat convection, but there is something different when microwave heating. The temperature of the top is always the highest in the liquid when heated by microwaves. In this paper, the multiphysics simulation and experimental comparison of the temperature distribution of microwave heated water and alcohol and microwave reheated rice are performed. In order to make the temperature distribution of liquids heated by microwaves uniform, the cut-off waveguide is used to control microwave heating and improve the temperature uniformity. The experimental results show that when the modified glass cup with 7 cm metal coating is used to heat water in a microwave oven, the temperature difference between the upper and lower parts of the water is reduced from 7.8 °C to 0.5 °C. The modified glass cup is placed in the center of the ceramic plate, far away from the cavity wall, and there is no spark ignition.

4 January 2022 in Nanomaterials
Verified
Journal Article
Open access
PDF file
RJRuirui Jiang
Ruirui Jiang
JLJianlong Liu
Jianlong Liu
KYKaiqiang Yang
Kaiqiang Yang
JZJing Zhao
Jing Zhao
BZBaoqing Zeng
Baoqing Zeng
A high emission current with relatively low operating voltage is critical for field emission cathodes in vacuum electronic devices (VEDs). This paper studied the field emission performance of single-wall carbon nanotube (SWCNT) cold cathodes prepared by screen printing with a silver paste buffer layer. The buffer layer can both enforce the adhesion between the SWCNTs and substrate, and decrease their contact resistance, so as to increase emission current. Compared with paste mixing CNTs and screen printed cathodes, the buffer layer can avoid excessive wrapping of CNTs in the silver slurry and increase effective emission area to reduce the operating voltage. The experimental results show that the turn-on field of the screen-printed SWCNT cathodes is 0.9 V/μm, which is lower than that of electrophoretic SWCNT cathodes at 2.0 V/μm. Meanwhile, the maximum emission current of the screen-printed SWCNT cathodes reaches 5.55 mA at DC mode and reaches 10.4 mA at pulse mode, which is an order magnitude higher than that of electrophoretic SWCNTs emitters. This study also shows the application insight of small or medium-power VEDs.

21 December 2021 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
RJRuirui Jiang
Ruirui Jiang
JLJianlong Liu
Jianlong Liu
PZPeiyang Zhao
Peiyang Zhao
KYKaiqiang Yang
Kaiqiang Yang
JZJing Zhao
Jing Zhao
BZBaoqing Zeng
Baoqing Zeng
This article designed a Ka -band traveling wave tube (TWT) with the single wall carbon nanotubes (SWCNTs) field emission cathode electron gun. The designed cold-cathode TWT was miniaturized and could instantly startup at room temperature because of the field emission cathode. First, SWCNT cathode was made by imprinting. The field emission measurement results showed that its turn-on field was as low as 0.57 MV/m, and the maximum emission current was about 10 mA. Then, a grid-controlled electron gun with planar field emission cathode was simulated based on the experiment results, which had low operation voltage of the electron gun and would prevent their grid mesh from burning. The optimized electron beam waist radius of the electron gun was 0.15 mm with the structure of the focusing magnetic field. According to experiment and simulation results, we preliminarily designed a Ka -band helix TWT with an average output power of 8.6 W and a gain of 24.6 dB at 28 GHz. The designed miniaturized TWT with a low-operation-voltage field emission cathode electron gun is expected to be used in low-power applications including 5G communication.

9 September 2021 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
KHKongyi Hu
Kongyi Hu
WTWanchun Tang
Wanchun Tang
LFLinping Feng
Linping Feng
BZBaoqing Zeng
Baoqing Zeng
YJYan Jiang
Yan Jiang
JLJianlong Liu
Jianlong Liu
An effective design for cold cathode named as the interdigitated field electron emission driving-secondary electron emission (FEE-SEE) cathode is proposed in this article. The cathode consists of an FEE region and an SEE region, which integrates the advantages of the field emission and secondary emission on the M-type device. The excellent FEE performance of the directional single-wall carbon nanotubes (SWCNTs) with an effective method of directly imprinting the SWCNTs sludge on a substrate is studied for obtaining higher primary excitation current. Meanwhile, the cathode prebunch technique is implemented by imposing a fivefold azimuthal variation on the SEE cathode of a ten-cavity magnetron, which could prebunch the electrons into the desired mode at birth to enhance stability and speed startup time. A 3-D particle-in-cell simulation analysis is used to predict a novel cold cathode magnetron with high output power of 3144 W with 6.2% efficiency enhancement with reference to the conventional thermionic cathode applied to the 2450-MHz magnetron. Its startup time is about 100 ns with excellent stability and pure output spectrum.