An extended classification of active RC- and RLC- filters with Sallen-Key architectures, including those created in the last three years, is proposed. This makes it possible to formulate new design directions for an extended family of active RC- and RLC- Sallen-Key filters (PF, LPF, HPF, RF) for the tasks of high-speed and ultra-fast analog-to-digital signal conversion.
Current mirror (CMs) are the basis of many analog integrated circuits. In this case, the systematic component of the zero bias voltage and the input common-mode rejection ratio of operational amplifiers, comparators, etc. largely depends on the current gain (K i ) of the CMs used in them, that is, the differences between K i and unity. The article presents the circuitry fundamentals of precision low-temperature CMs for JFET/ CJFET operational amplifiers, providing the ability to obtain both inverting and non-inverting K i values (+1, +2, +3, -1, -2). Non-inverting CMs with $\mathrm{K}_{\mathrm{i}}=1\div 3$ are in demand in active RC filters of the Sallen-Key class. Due to the use of JFET transistors, the proposed CMs operate in the low temperature range (up to -197°C), as well as with a neutron flux up to 10 14 n/cm 2 . Computer simulation of the developed CMs, performed in the LTSpice XVII environment on complementary field-effect transistors with a control pn junction of JSC “Integral” (Minsk, Republic of Belarus) and confirms the high precision of the considered CMs in a wide range of input currents.
A perspective stabilization method for the static mode of a “floating” input differential stage in an op-amp based on complementary field-effect transistors with a control p-n junction (CJFet) is considered. The method provides small values of the systematic component of the offset voltage $(\mathrm{V}_{\mathrm{o}\mathrm{s}})$, as well as increased values of the voltage gain (A 0 ) and the input common-mode rejection ratio (CMRR) without the use of classical current mirrors. The mathematical analysis is presented, which confirms the results of computer simulation of the op-amp on the models of CJFet transistors of JSC“Integral” (Minsk, Republic of Belarus). The structure of a CAD-system is considered, which allows solving problems of both local and global multicriteria and parallel optimization of analog microcircuits in the LTspice environment on a multicore processor, as well as distributed optimization on clusters of weak computer systems. In the LTspice environment, parametric optimization of the proposed op-amp was performed, which made it possible to reduce $\mathrm{V}_{\mathrm{o}\mathrm{s}}$ by more than 1000 times to a level of 10-100$\mu$V when exposed to radiation and cryogenic temperatures, as well as to obtain the voltage gain of an open op-amp of about 120 dB with one highimpedance node.
A new passband filter (PBF) circuit of the Sallen-Key family is considered, in which independent control of the basic parameters (pole frequency, quality factor and transmission coefficient) by digital potentiometers is implemented. The basic mathematical expressions for the transfer function of active RC filters and the parameters of its frequency response are obtained. The results of PBF modeling in the Micro-Cap are discussed, which confirm these properties of active RC filter. The proposed Sallen-Key PBF circuitry is recommended for filtering signals in automation, radio engineering and communication devices. Due to the appropriate choice of parameters of active and passive elements, it is possible to ensure the operation of the Sallen-Key PBF under consideration both at low and high frequencies.