Low-loss all-fiber photonic lantern (PL) mode multiplexers (MUXs) capable of selectively exciting the first six fiber modes of a multimode fiber (${\mathrm{LP}}_{01}$, ${\mathrm{LP}}_{11\mathrm{a}}$, ${\mathrm{LP}}_{11\mathrm{b}}$, ${\mathrm{LP}}_{21\mathrm{a}}$, ${\mathrm{LP}}_{21\mathrm{b}}$, and ${\mathrm{LP}}_{02}$) are demonstrated. Fabrication of the spatial mode multiplexers was successfully achieved employing a combination of either six step or six graded index fibers of four different core sizes. Insertion losses of 0.2–0.3 dB and mode purities above 9 dB are achieved. Moreover, it is demonstrated that the use of graded index fibers in a PL eases the length requirements of the adiabatic tapered transition and could enable scaling to large numbers.

We transmit over all 30 spatial and polarization modes of a 22.8-km multimode fiber. 15-mode photonic lanterns enabled low-loss coupling into and out of the fiber and a time-multiplexed coherent receiver facilitates measurement of all 30 signals.

We present a new technique allowing the fabrication of large modal count photonic lanterns for space-division multiplexing applications. We demonstrate mode-selective photonic lanterns supporting 10 and 15 spatial channels by using graded-index fibres and microstructured templates. These templates are a versatile approach to position the graded-index fibres in the required geometry for efficient mode sampling and conversion. Thus, providing an effective scalable method for large number of spatial modes in a repeatable manner. Further, we demonstrate the efficiency and functionality of our photonic lanterns for optical communications. Our results show low insertion and mode dependent losses, as well as enhanced mode selectivity when spliced to few mode transmission fibres. These photonic lantern mode multiplexers are an enabling technology for future ultra-high capacity optical transmission systems.

Luminescent solar concentrators (LSCs) use dye molecules embedded in a flat-plate waveguide to absorb solar radiation. Ideally, the dyes re-emit the absorbed light into waveguide modes that are coupled to solar cells. But some photons are always lost, re-emitted through the face of the LSC and coupled out of the waveguide. In this work, we improve the fundamental efficiency limit of an LSC by controlling the orientation of dye molecules using a liquid crystalline host. First, we present a theoretical model for the waveguide trapping efficiency as a function of dipole orientation. Next, we demonstrate an increase in the trapping efficiency from 66% for LSCs with no dye alignment to 81% for a LSC with vertical dye alignment. Finally, we show that the enhanced trapping efficiency is preserved for geometric gains up to 30, and demonstrate that an external diffuser can alleviate weak absorption in LSCs with vertically-aligned dyes.

We report the optimization of a few-mode fiber, adapted to multiple-input multiple-output mode division multiplexing, that supports 9 LP modes (15 spatial modes). The fiber is fabricated using standard multimode processes, which allows for tight process tolerances, yielding low differential mode group delays (<;155 ps/km) with low attenuations (<;0.22 dB/km), large effective areas (≥95 μm ² ) and low bend losses.