Low-loss all-fiber photonic lantern (PL) mode multiplexers (MUXs) capable of selectively exciting the first six fiber modes of a multimode fiber (${\mathrm{LP}}_{01}$, ${\mathrm{LP}}_{11\mathrm{a}}$, ${\mathrm{LP}}_{11\mathrm{b}}$, ${\mathrm{LP}}_{21\mathrm{a}}$, ${\mathrm{LP}}_{21\mathrm{b}}$, and ${\mathrm{LP}}_{02}$) are demonstrated. Fabrication of the spatial mode multiplexers was successfully achieved employing a combination of either six step or six graded index fibers of four different core sizes. Insertion losses of 0.2–0.3 dB and mode purities above 9 dB are achieved. Moreover, it is demonstrated that the use of graded index fibers in a PL eases the length requirements of the adiabatic tapered transition and could enable scaling to large numbers.

Probabilistic shaping based on constant composition distribution matching (CCDM) has received considerable attention as a way to increase the capacity of fiber optical communication systems. CCDM suffers from significant rate loss at short blocklengths and requires long blocklengths to achieve high shaping gain, which makes its implementation very challenging. In this paper, we propose to use enumerative sphere shaping (ESS) and investigate its performance for the nonlinear fiber optical channel. ESS has lower rate loss than CCDM at the same shaping rate, which makes it a suitable candidate to be implemented in real-time high-speed optical systems. In this paper, we first show that finite blocklength ESS and CCDM exhibit higher effective signal-to-noise ratio than their infinite blocklength counterparts. These results show that for the nonlinear fiber optical channel, large blocklengths should be avoided. We then show that for a 400 Gb/s dual-polarization 64-QAM WDM transmission system, ESS with short blocklengths outperforms both uniform signaling and CCDM. Gains in terms of both bit-metric decoding rate and bit-error rate are presented. ESS with a blocklength of 200 is shown to provide an extension reach of about 200 km in comparison with CCDM with the same blocklength. The obtained reach increase of ESS with a blocklength of 200 over uniform signaling is approximately 450 km (approximately 19%).

We present a new technique allowing the fabrication of large modal count photonic lanterns for space-division multiplexing applications. We demonstrate mode-selective photonic lanterns supporting 10 and 15 spatial channels by using graded-index fibres and microstructured templates. These templates are a versatile approach to position the graded-index fibres in the required geometry for efficient mode sampling and conversion. Thus, providing an effective scalable method for large number of spatial modes in a repeatable manner. Further, we demonstrate the efficiency and functionality of our photonic lanterns for optical communications. Our results show low insertion and mode dependent losses, as well as enhanced mode selectivity when spliced to few mode transmission fibres. These photonic lantern mode multiplexers are an enabling technology for future ultra-high capacity optical transmission systems.

We report the optimization of a few-mode fiber, adapted to multiple-input multiple-output mode division multiplexing, that supports 9 LP modes (15 spatial modes). The fiber is fabricated using standard multimode processes, which allows for tight process tolerances, yielding low differential mode group delays (<;155 ps/km) with low attenuations (<;0.22 dB/km), large effective areas (≥95 μm ² ) and low bend losses.

Wavelength selective switches (WSSs) that are integrated in reconfigurable optical add-drop multiplexers (ROADMs) induce penalties on the optical signal due to tight optical filtering, which increases as several ROADMs are cascaded in a meshed network. In this letter, we propose and analyze possible configurations for the mitigation of these penalties in optical domain using optical wave shaper (WS). Including one WS in every ROADM node allows transmission of 28 and 32 GBd signals, which are QPSK, 8-QAM, or 16-QAM modulated, through a cascade of 32 and 14 WSS filters, respectively. With an average bandwidth of 33 GHz per WSS, an optical signal to noise ratio penalty below 1 dB at BER=1×10^-3 is observed.