Mohsen Ghali

Dr. Mohsen Ghali


Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 April 2021 in Processes
Verified
Journal Article
Open access
PDF file
AAAbdelrahman Alshehawy
Abdelrahman Alshehawy
Diaa-Eldin A. MansourDiaa-Eldin A. Mansour
Diaa-Eldin A. Mansour
MGMohsen Ghali
Mohsen Ghali
Matti LehtonenMatti Lehtonen
Matti Lehtonen
Mohamed M. F. DarwishMohamed M. F. Darwish
Mohamed M. F. Darwish
Condition assessment of insulating oil is crucial for the reliable long-term operation of power equipment, especially power transformers. Under thermal aging, critical degradation in oil properties, including chemical, physical, and dielectric properties, occurs due to the generation of aging byproducts. Ultraviolet-visible (UV-Vis) spectroscopy was recently proposed for the condition assessment of mineral oil. However, this absorption technique may involve all electronic states of the investigated material which typically yield a broad spectrum, and thus cannot precisely reflect the electronic structure of aged oil samples. It also cannot be implemented as an online sensor of oil degradation. In this paper, photoluminescence (PL) spectroscopy is introduced, for the first time, for effective condition assessment of insulating oil. The PL technique involves emission processes that only occur between a narrow band of electronic states that are occupied by thermalized electrons and consequently yields a spectrum that is much narrower than that of the absorption spectrum. Aged oil samples with different aging extents were prepared in the laboratory using accelerated aging tests at 120 °C, under which 1 day of laboratory aging is equivalent to approximately 1 year of aging in the field. These aged samples were then tested using PL spectroscopy with a wavelength ranging from 150 nm to 1500 nm. Two main parameters were evaluated for quantitative analysis of PL spectra: The full width at half-maximum and the enclosed area under the PL spectra. These parameters were correlated to the aging extent. In conjunction with PL spectroscopy, the aged oil samples were tested for the dielectric dissipation factor as an indication of the number of aging byproducts. Interestingly, we find a correlation between the PL spectra and the dielectric dissipation factor. The results of PL spectroscopy were compared to those of UV-Vis spectroscopy for the same samples and the parameters extracted from PL spectra were compared to the aging b-products extracted from UV-Vis spectra. Finally, the corresponding physical mechanisms were discussed considering the obtained results and the spectral shift for each spectrum. It was proved that PL spectroscopy is a promising technique for the condition assessment of insulating oil when compared to conventional transformer oil assessment measuring techniques and even to other optical absorption techniques.

13 November 2024 in Scientific Reports
Verified
Journal Article
Open access
PDF file
SESalah Elkun
Salah Elkun
MGMohsen Ghali
Mohsen Ghali
TST. Sharshar
T. Sharshar
MMM. M. Mosaad
M. M. Mosaad
Water-soluble fluorescent N-doped carbon quantum dots (N-CQDs) were hydrothermally prepared through a green synthesis route using castor seeds as a single precursor and a hydrothermal method. Several experimental techniques have been used to characterize synthesized N-CQDs to confirm their structure and to verify their applicability in cell imaging and pH sensing. The synthesized N-CQDs were found to have are characterized by amorphous nature with a spherical shape with an average particle size of 6.57 nm as revealed from XRD and TEM measurements. The FTIR results reveal the presence of carboxylic and hydroxyl functional groups on the surface of the CQDs, which was also confirmed by XPS analysis. The fluorescence characterization of the synthesized N-CQDs showed blue emission and excitation dependence with good photostability. It was found that the optimal excitation and emission wavelengths were (λEx = 360) and (λEm = 432) nm, respectively. The fluorescence quantum yield (QY) of about 9.6% at the optimum excitation wavelength 360 nm. Moreover, the fluorescence intensity of N-CQDs showed good linear dependence with the pH values in ranges of 3.5 − 7.5 and 8 − 12 as well as high sensitivity for slight changes of pH values. According to these results, two fluorescent pH sensors were created based on acidic and basic media. The obtained N-CQDs have zeta potential of -21.86 mV and thus have excellent stability in water. Moreover, N-CQDs derived from the castor seeds have antimicrobial activity and exhibits low cytotoxicity to WI-13 cells with IC50 = 394.4 ± 13.8 µg/mL. The results of this study demonstrated that the synthesized N-CQDs derived from castor seeds can be used as pH sensing and antimicrobial materials. On the other hand, they are also promising in applications in cell imaging, thermo-sensing and optoelectronics.

20 September 2023 in Scientific Reports
Verified
Journal Article
Open access
PDF file
PAPrince Anagbonu
Prince Anagbonu
MGMohsen Ghali
Mohsen Ghali
AAAhmed Allam
Ahmed Allam
Graphene presents practical applications in energy storage devices, especially supercapacitors. However, mainstream synthesis of graphene includes toxic chemical usage, which threatens the environment. With the recent attention shift to synthesizing nanomaterials from agro-waste due to their easy availability, cost-effectiveness, and, most importantly, their environmental friendliness, we present, in this work for the first time, a novel and green synthesis of few-layered graphene sheets using pomegranate peels as a precursor at a low temperature of 80 °C. The surface morphology and microstructural properties are determined by Transmission Electron Microscopy (TEM), Energy Dispersive X-Ray spectroscopy (EDX), X-Ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), UV–visible spectroscopy (UV–vis), and the electrical properties determined by Hall Effect Measurement. The application as a supercapacitor is also examined using Cyclic Voltammetry (CV), Charge–Discharge Cycling (GCD), and Electrochemical Impedance Spectroscopy (EIS). The resulting supercapacitor delivers an areal capacitance of $$3.39 mF{cm}^{-2}$$ 3.39 m F cm - 2 at a current density of 15.6 μA $${cm}^{-2}$$ cm - 2 , making our synthesized graphene a good choice for electrochemical storage devices.

14 July 2020 in Journal of Physics D: Applied Physics
Verified
Journal Article
Closed access
PDF file
YBYasmin Mohamed Bakier
Yasmin Mohamed Bakier
MGMohsen Ghali
Mohsen Ghali
WZWaheed Zahra
Waheed Zahra
Fluorescent carbon quantum dots (CQDs) have been emerged in countless applications due to their interesting optical, surface properties, and the simplicity of their synthetic routes. On the other hand, pyridine is toxic that could inter into the human living environment causing many health problems, e.g. asthmatic breathing and laryngitis. Here, water-soluble 2.75 nm size N-doped CQDs have been synthesized from folic acid and used as chemo-sensor for the determination of pyridine. It was found that pyridine can quench the fluorescence of N-CQDs effectively. The quenching is explained in terms of Stern–Volmer relation and confirmed by fluorescence lifetime measurements to have a dynamic character with a predetermined electron transfer. The detection limit for pyridine was found to be 18 nM. To the best of our knowledge, such a small detection limit is more than three orders of magnitude smaller than that obtained so far for pyridine detection using any other facile methods.

22 October 2024 in Scientific Reports
Verified
Journal Article
Open access
PDF file
MSMohamed Sami
Mohamed Sami
MEMohamed E. El-Khouly
Mohamed E. El-Khouly
MGMohsen Ghali
Mohsen Ghali
The development of efficient and environmentally sustainable materials for white light-emitting diodes (WLEDs) is of paramount importance in the field of lighting technology. In this study, we present a solvent-modulated synthesis approach for the fabrication of multicolor narrow-bandwidth emissive carbon quantum dots (CQDs) as a promising solution for constructing WLEDs. The synthesis method involves the controlled reaction of organic precursors in different solvent environments, leading to the formation of CQDs with distinct emission wavelengths with a relatively small full width at half maximum, ranging from 28 to 42 nm. Moreover, these synthesized multicolor CQDs demonstrate a remarkably high fluorescence quantum yield of up to 65%, indicating their potential for constructing efficient WLED when incorporated in polymer matrix and coated on the surface of blue light-emitting diode (LED).

12 April 2021 in Journal of Applied Polymer Science
Verified
Journal Article
Closed access
PDF file
MAMariamu Kassim Ali
Mariamu Kassim Ali
AHAmr Hessein
Amr Hessein
MHMohsen A. Hassan
Mohsen A. Hassan
MGMohsen Ghali
Mohsen Ghali
NSNagih M. Shaalan
Nagih M. Shaalan
AEAhmed Abd El‐Moneim
Ahmed Abd El‐Moneim