Claudia Ramírez-Herrera

Dr. Claudia Ramírez-Herrera

Centro de Investigación en Química Aplicada
+1

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 April 2021 in Polymers
Verified
Journal Article
Open access
PDF file
Claudia Ramírez-HerreraClaudia Ramírez-Herrera
Claudia Ramírez-Herrera
ICIsidro Cruz-Cruz
Isidro Cruz-Cruz
IJIsaac H. Jiménez-Cedeño
Isaac H. Jiménez-Cedeño
OMOscar Martinez-Romero
Oscar Martinez-Romero
Alex Elías-ZúñigaAlex Elías-Zúñiga
Alex Elías-Zúñiga
This work focuses on investigating the curing process of an epoxy-based resin—Aerotuf 275-34TM, designed for aerospace applications. To study the curing degree of Aerotuf 275-34TM under processing conditions, woven carbon fiber fabric (WCFF)/Aerotuf 275-34TM composite laminates were produced by compression molding using different processing temperatures (110, 135, 160, and 200 °C) during 15 and 30 min. Then, the mechanical behavior of the composite laminates was evaluated by tensile tests and correlated to the resin curing degree through Fourier-transform infrared spectroscopy (FTIR) analysis. The results show the occurrence of two independent reactions based on the consumption of epoxide groups and maleimide (MI) double bonds. In terms of epoxide groups, a conversion degree of 0.91 was obtained for the composite cured at 160 °C during 15 min, while the measured tensile properties of [±45°] WCFF/Aerotuf 275-34TM laminates confirmed that these epoxy resin curing processing conditions lead to an enhancement of the composite mechanical properties.

10 February 2019 in Nanomaterials
Verified
Journal Article
Open access
PDF file
Claudia Ramírez-HerreraClaudia Ramírez-Herrera
Claudia Ramírez-Herrera
HGHomero Gonzalez
Homero Gonzalez
FTFelipe de la Torre
Felipe de la Torre
LBLaura Benitez
Laura Benitez
JCJosé Gerardo Cabañas-Moreno
José Gerardo Cabañas-Moreno
Karen LozanoKaren Lozano
Karen Lozano
The demand for multifunctional requirements in aerospace, military, automobile, sports, and energy applications has encouraged the investigation of new composite materials. This study focuses on the development of multiwall carbon nanotube (MWCNT) filled polypropylene composites and carbon nanofiber composite mats. The developed systems were then used to prepare interlayered composites that exhibited improved electrical conductivity and electromagnetic interference (EMI) shielding efficiency. MWCNT-carbon nanofiber composite mats were developed by centrifugally spinning mixtures of MWCNT suspended in aqueous poly(vinyl alcohol) solutions. The developed nanofibers were then dehydrated under sulfuric acid vapors and then heat treated. Interlayered samples were fabricated using a nanoreinforced polypropylene composite as a matrix and then filled with carbon fiber composite mats. The in-plane and through-plane electrical conductivity of an eight-layered flexible carbon composite (0.65 mm thick) were shown to be 6.1 and 3.0 × 10−2 S·cm−1, respectively. The EMI shielding effectiveness at 900 MHz increased from 17 dB for the one-layered composite to 52 dB for the eight-layered composite. It was found that the reflection of the electromagnetic waves was the dominating mechanism for EMI shielding in the developed materials. This study opens up new opportunities for the fabrication of novel lightweight materials that are to be used in communication systems.

9 March 2022 in Polymers
Verified
Journal Article
Open access
PDF file
ICIsidro Cruz-Cruz
Isidro Cruz-Cruz
Claudia Ramírez-HerreraClaudia Ramírez-Herrera
Claudia Ramírez-Herrera
OMOscar Martinez-Romero
Oscar Martinez-Romero
SCSantos Armando Castillo-Márquez
Santos Armando Castillo-Márquez
IJIsaac H. Jiménez-Cedeño
Isaac H. Jiménez-Cedeño
Alex Elías-ZúñigaAlex Elías-Zúñiga
Alex Elías-Zúñiga
In this study, the kinetic parameters belonging to the cross-linking process of a modified epoxy resin, Aerotuf 275-34™, were investigated. Resin curing kinetics are crucial to understanding the structure–property–processing relationship for manufacturing high-performance carbon-fiber-reinforced polymer composites (CFRPCs). The parameters were obtained using differential scanning calorimetry (DSC) measurements and the Flynn–Wall–Ozawa, Kissinger, Borchardt–Daniels, and Friedman approaches. The DSC thermograms show two exothermic peaks that were deconvoluted as two separate reactions that follow autocatalytic models. Furthermore, the mechanical properties of produced carbon fiber/Aerotuf 275-34™ laminates using thermosetting polymers such as epoxies, phenolics, and cyanate esters were evaluated as a function of the conversion degree, and a close correlation was found between the degree of curing and the ultimate tensile strength (UTS). We found that when the composite material is cured at 160 °C for 15 min, it reaches a conversion degree of 0.97 and a UTS value that accounts for 95% of the maximum value obtained at 200 °C (180 MPa). Thus, the application of such processing conditions could be enough to achieve good mechanical properties of the composite laminates. These results suggest the possibility for the development of strategies towards manufacturing high-performance materials based on the modified epoxy resin (Aerotuf 275-34™) through the curing process.

1 May 2019 in International Journal of Hydrogen Energy
Verified
Journal Article
Closed access
HCHeriberto Cruz-Martínez
Heriberto Cruz-Martínez
MTMiriam M. Tellez-Cruz
Miriam M. Tellez-Cruz
OGO.X. Guerrero-Gutiérrez
O.X. Guerrero-Gutiérrez
Claudia Ramírez-HerreraClaudia Ramírez-Herrera
Claudia Ramírez-Herrera
MSM.G. Salinas-Juárez
M.G. Salinas-Juárez
OSO. Solorza-Feria
O. Solorza-Feria

1 May 2019 in International Journal of Hydrogen Energy
Verified
Journal Article
Closed access
HCHeriberto Cruz-Martínez
Heriberto Cruz-Martínez
MTMiriam M. Tellez-Cruz
Miriam M. Tellez-Cruz
Hugo Rojas-ChávezHugo Rojas-Chávez
Hugo Rojas-Chávez
Claudia Ramírez-HerreraClaudia Ramírez-Herrera
Claudia Ramírez-Herrera
PCP. Calaminici
P. Calaminici
OSO. Solorza-Feria
O. Solorza-Feria

3 May 2018 in Journal of Materials Science
Verified
Journal Article
Closed access
PDF file
Claudia Ramírez-HerreraClaudia Ramírez-Herrera
Claudia Ramírez-Herrera
AFA. I. Flores-Vela
A. I. Flores-Vela
ATAidé Torres
Aidé Torres
MDM. A. Domínguez-Crespo
M. A. Domínguez-Crespo
DPD. Palma-Ramírez
D. Palma-Ramírez