Designing a piezoelectric energy harvester (PEH) with high power density and high fatigue resistance is essential for the successful replacement of the currently using batteries in structural health monitoring (SHM) systems. Among the various designs, the PEH comprising of a cantilever structure as a passive layer and piezoelectric single crystal-based fiber composites (SFC) as an active layer showed excellent performance due to its high electromechanical properties and dynamic flexibilities that are suitable for low frequency vibrations. In the present study, an effort was made to investigate the reliable performance of hard and soft SFC based PEHs. The base acceleration of both PEHs is held at 7 m/s2 and the frequency of excitation is tuned to their resonant frequency (fr) and then the output power (Prms) is monitored for 107 fatigue cycles. The effect of fatigue cycles on the output voltage, vibration displacement, dielectric, and ferroelectric properties of PEHs was analyzed. It was noticed that fatigue-induced performance degradation is more prominent in soft SFC-based PEH (SS-PEH) than in hard SFC-based PEH (HS-PEH). The HS-PEH showed a slight degradation in the output power due to a shift in fr, however, no degradation in the maximum power was noticed, in fact, dielectric and ferroelectric properties were improved even after 107 vibration cycles. In this context, the present study provides a pathway to consider the fatigue life of piezoelectric material for the designing of PEH to be used at resonant conditions for long-term operation.
The rolling texture formed in the conventional cold rolling process of commercially pure titanium (CP-Ti) for producing a metal sheet significantly limits the potential applications of CP-Ti sheets in various industrial sectors by impairing the formability. Here, we report that by exploiting a twinning-induced crystallographic texture modification, the rolling texture can be weakened and dispersed effectively, leading to a simultaneous improvement in the formability and yield strength. A two-stage cold rolling process was designed with intermediate annealing at a late stage of the conventional cold rolling process to generate deformation twins. The intermediate annealing drove the activation of $$\{11\bar{2}2\}$$ twin and $$\{11\bar{2}2\}$$ – $$\{10\bar{1}2\}$$ double twin in the second stage of the rolling process by removing the internal reaction stress developed in the first stage of the rolling process through recrystallization, and the crystallographic feature of the $$\{11\bar{2}2\}$$ twinned region, i.e., $$\{11\bar{2}2\}$$ twin texture, was effective for <a> type slips and $$\{10\bar{1}2\}$$ twinning to accommodate a through-thickness strain as well as for reducing the planar anisotropy. This enhanced thinning capability and reduced planar anisotropy in the $$\{11\bar{2}2\}$$ twin texture led to an improvement of the formability. We demonstrated the feasibility of the suggested two-stage cold rolling process with ASTM grade 2 CP-Ti.